main
Ray pic16lf1828-i-ml: renamed from pic16lf1828-i, the part it was built from (PIC16LF1828-I/ML); family listed 90e8500

PIC16LF1828-I/ML

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-20(4x4)

PIC16LF1828-I from Microchip Tech, in a QFN-20(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RA3/MCLR/VPP input Input-only port pin RA3 with IOC, weak pull-up and T1G(alt); also MCLR reset / VPP programming voltage input.
2 RC5 bidirectional General-purpose I/O RC5 with weak pull-up, shared with CCP1/P1A, RX/DT (alt) and modulator input MDCIN2.
3 RC4 bidirectional General-purpose I/O RC4 with weak pull-up, shared with C2OUT, SRNQ, P1B, TX/CK (alt) and modulator output MDOUT.
4 RC3 bidirectional General-purpose I/O RC3 with weak pull-up, shared with AN7, CPS7, C12IN3-, P1C/CCP2/P2A (alt) and modulator input MDMIN.
5 RC6 bidirectional General-purpose I/O RC6 with weak pull-up, shared with AN8, CPS8, CCP4 and SS.
6 RC7 bidirectional General-purpose I/O RC7 with weak pull-up, shared with AN9, CPS9 and SDO.
7 RB7 bidirectional General-purpose I/O RB7 with interrupt-on-change and weak pull-up, shared with TX/CK (alt) and SCL2/SCK2 (alt).
8 RB6 bidirectional General-purpose I/O RB6 with interrupt-on-change and weak pull-up, shared with SCL1/SCK1.
9 RB5 bidirectional General-purpose I/O RB5 with interrupt-on-change and weak pull-up, shared with AN11, CPS11, RX/DT (alt) and SDA2/SDI2 (alt).
10 RB4 bidirectional General-purpose I/O RB4 with interrupt-on-change and weak pull-up, shared with AN10, CPS10 and SDA1/SDI1.
11 RC2 bidirectional General-purpose I/O RC2 with weak pull-up, shared with AN6, CPS6, C12IN2-, P1D/P2B (alt) and modulator input MDCIN1.
12 RC1 bidirectional General-purpose I/O RC1 with weak pull-up, shared with AN5, CPS5, C12IN1-, P1C (alt) and SDO2 (alt).
13 RC0 bidirectional General-purpose I/O RC0 with weak pull-up, shared with AN4, CPS4, C2IN+, P1D (alt) and SS2 (alt).
14 RA2 bidirectional General-purpose I/O RA2 with IOC, INT and weak pull-up, shared with AN2, CPS2, C1OUT, SRQ, T0CKI, CCP3 and FLT0.
15 RA1 bidirectional General-purpose I/O RA1 with IOC and weak pull-up, shared with AN1, VREF+, CPS1, C12IN0-, SRI; ICSPCLK/ICDCLK programming and debug clock.
16 RA0 bidirectional General-purpose I/O RA0 with IOC and weak pull-up, shared with AN0, VREF-/DACOUT, CPS0, C1IN+; ICSPDAT/ICDDAT programming and debug data.
17 VSS power_in Ground reference; position inferred from the QFN diagram as the only unassigned pin (table prints a conflicting number).
18 VDD power_in Positive supply; 1.8V to 3.6V for the PIC16LF182X devices.
19 RA5 bidirectional General-purpose I/O RA5 with IOC and weak pull-up, shared with T1CKI, T1OSI, CCP2/P2A (alt), SDO2 (alt); OSC1/CLKIN oscillator input.
20 RA4 bidirectional General-purpose I/O RA4 with IOC and weak pull-up, shared with AN3, CPS3, T1G (alt), T1OSO, P2B (alt), SS2 (alt); OSC2/CLKOUT oscillator output.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-20(4x4)
Category Single Chip Microcomputer/Microcontroller
Pins 21

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range (PIC1XLF182X) VDD 1.8 3.6 V PIC1XLF182X 1
Operating Speed, clock input 0 32 MHz DC, 32 MHz clock input 1
Instruction cycle 125 ns DC, 125 ns instruction cycle 1
Internal oscillator factory calibration 1 % Factory calibrated to ±1%, typical 1
Standby Current (PIC1XLF182X) 30 nA 1.8V 1
Operating Current (PIC1XLF182X) 75 µA 1 MHz, 1.8V 1
Low-Power Watchdog Timer Current (PIC1XLF182X) 500 nA 1.8V 1

CAD (KiCad official)

  • Symbol: PIC16LF1828-I
  • Footprint: Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm
  • 3D model: QFN-20(4x4) (KiCad packages3D, STEP)
  • 3D model files: pic16lf1828-i-etched.step / pic16lf1828-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16lf1828-i.step / pic16lf1828-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (10 pp, sha256 9aeee263ecfd8d2c, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC16LF1828-I/ML. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC16LF1828-I/SS