Generated by kicad-footprint-generator · KiCad file format 20260206
PIC16LF1828-I/ML
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-20(4x4)
PIC16LF1828-I from Microchip Tech, in a QFN-20(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA3/MCLR/VPP | input | Input-only port pin RA3 with IOC, weak pull-up and T1G(alt); also MCLR reset / VPP programming voltage input. |
| 2 | RC5 | bidirectional | General-purpose I/O RC5 with weak pull-up, shared with CCP1/P1A, RX/DT (alt) and modulator input MDCIN2. |
| 3 | RC4 | bidirectional | General-purpose I/O RC4 with weak pull-up, shared with C2OUT, SRNQ, P1B, TX/CK (alt) and modulator output MDOUT. |
| 4 | RC3 | bidirectional | General-purpose I/O RC3 with weak pull-up, shared with AN7, CPS7, C12IN3-, P1C/CCP2/P2A (alt) and modulator input MDMIN. |
| 5 | RC6 | bidirectional | General-purpose I/O RC6 with weak pull-up, shared with AN8, CPS8, CCP4 and SS. |
| 6 | RC7 | bidirectional | General-purpose I/O RC7 with weak pull-up, shared with AN9, CPS9 and SDO. |
| 7 | RB7 | bidirectional | General-purpose I/O RB7 with interrupt-on-change and weak pull-up, shared with TX/CK (alt) and SCL2/SCK2 (alt). |
| 8 | RB6 | bidirectional | General-purpose I/O RB6 with interrupt-on-change and weak pull-up, shared with SCL1/SCK1. |
| 9 | RB5 | bidirectional | General-purpose I/O RB5 with interrupt-on-change and weak pull-up, shared with AN11, CPS11, RX/DT (alt) and SDA2/SDI2 (alt). |
| 10 | RB4 | bidirectional | General-purpose I/O RB4 with interrupt-on-change and weak pull-up, shared with AN10, CPS10 and SDA1/SDI1. |
| 11 | RC2 | bidirectional | General-purpose I/O RC2 with weak pull-up, shared with AN6, CPS6, C12IN2-, P1D/P2B (alt) and modulator input MDCIN1. |
| 12 | RC1 | bidirectional | General-purpose I/O RC1 with weak pull-up, shared with AN5, CPS5, C12IN1-, P1C (alt) and SDO2 (alt). |
| 13 | RC0 | bidirectional | General-purpose I/O RC0 with weak pull-up, shared with AN4, CPS4, C2IN+, P1D (alt) and SS2 (alt). |
| 14 | RA2 | bidirectional | General-purpose I/O RA2 with IOC, INT and weak pull-up, shared with AN2, CPS2, C1OUT, SRQ, T0CKI, CCP3 and FLT0. |
| 15 | RA1 | bidirectional | General-purpose I/O RA1 with IOC and weak pull-up, shared with AN1, VREF+, CPS1, C12IN0-, SRI; ICSPCLK/ICDCLK programming and debug clock. |
| 16 | RA0 | bidirectional | General-purpose I/O RA0 with IOC and weak pull-up, shared with AN0, VREF-/DACOUT, CPS0, C1IN+; ICSPDAT/ICDDAT programming and debug data. |
| 17 | VSS | power_in | Ground reference; position inferred from the QFN diagram as the only unassigned pin (table prints a conflicting number). |
| 18 | VDD | power_in | Positive supply; 1.8V to 3.6V for the PIC16LF182X devices. |
| 19 | RA5 | bidirectional | General-purpose I/O RA5 with IOC and weak pull-up, shared with T1CKI, T1OSI, CCP2/P2A (alt), SDO2 (alt); OSC1/CLKIN oscillator input. |
| 20 | RA4 | bidirectional | General-purpose I/O RA4 with IOC and weak pull-up, shared with AN3, CPS3, T1G (alt), T1OSO, P2B (alt), SS2 (alt); OSC2/CLKOUT oscillator output. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-20(4x4) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range (PIC1XLF182X) | VDD | 1.8 | 3.6 | V | PIC1XLF182X | 1 | |
| Operating Speed, clock input | 0 | 32 | MHz | DC, 32 MHz clock input | 1 | ||
| Instruction cycle | 125 | ns | DC, 125 ns instruction cycle | 1 | |||
| Internal oscillator factory calibration | 1 | % | Factory calibrated to ±1%, typical | 1 | |||
| Standby Current (PIC1XLF182X) | 30 | nA | 1.8V | 1 | |||
| Operating Current (PIC1XLF182X) | 75 | µA | 1 MHz, 1.8V | 1 | |||
| Low-Power Watchdog Timer Current (PIC1XLF182X) | 500 | nA | 1.8V | 1 |
CAD (KiCad official)
- Symbol:
PIC16LF1828-I - Footprint:
Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm - 3D model: QFN-20(4x4) (KiCad packages3D, STEP)
- 3D model files:
pic16lf1828-i-etched.step/pic16lf1828-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16lf1828-i.step/pic16lf1828-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (10 pp, sha256
9aeee263ecfd8d2c, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16LF1828-I/ML. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16LF1828-I/SS