Generated by kicad-footprint-generator · KiCad file format 20260206
PIC16LF1509-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-20-208mil
PIC16LF1509-I from Microchip Tech, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply; PIC16LF1509 operates from 1.8V to 3.6V. |
| 2 | RA5 | bidirectional | General purpose I/O with IOC and weak pull-up; also CLKIN/OSC1, T1CKI, NCO1CLK and SOSCI. |
| 3 | RA4 | bidirectional | General purpose I/O with IOC and weak pull-up; also AN3, SOSCO, CLKOUT/OSC2 and T1G. |
| 4 | RA3 | input | Input-only pin (TRIS bit always reads 1) with IOC and weak pull-up; Master Clear (MCLR) with internal pull-up, VPP programming voltage, plus CLC1IN0 and alternate T1G/SS. |
| 5 | RC5 | bidirectional | General purpose I/O; also PWM1 output, CWG1A primary output and CLC1 output (alternate pin). |
| 6 | RC4 | bidirectional | General purpose I/O; also C2OUT, CLC2IN1, CLC4 output and CWG1B complementary output. |
| 7 | RC3 | bidirectional | General purpose I/O; also AN7, C1IN3-/C2IN3- comparator negative inputs, PWM2 output and CLC2IN0. |
| 8 | RC6 | bidirectional | General purpose I/O; also AN8, NCO1 output (alternate pin), CLC3IN1 and SS. |
| 9 | RC7 | bidirectional | General purpose I/O; also AN9, CLC1IN1 and SPI data output SDO. |
| 10 | RB7 | bidirectional | General purpose I/O with IOC and weak pull-up; also CLC3 output, EUSART TX and synchronous clock CK. |
| 11 | RB6 | bidirectional | General purpose I/O with IOC and weak pull-up; also I2C clock SCL and SPI clock SCK. |
| 12 | RB5 | bidirectional | General purpose I/O with IOC and weak pull-up; also AN11, CLC4IN0, EUSART RX and synchronous data DT. |
| 13 | RB4 | bidirectional | General purpose I/O with IOC and weak pull-up; also AN10, CLC3IN0, I2C data SDA and SPI data input SDI. |
| 14 | RC2 | bidirectional | General purpose I/O; also AN6 and C1IN2-/C2IN2- comparator negative inputs. |
| 15 | RC1 | bidirectional | General purpose I/O; also AN5, C1IN1-/C2IN1-, PWM4 output and NCO1 output. |
| 16 | RC0 | bidirectional | General purpose I/O; also AN4, CLC2 output and C2IN+ comparator positive input. |
| 17 | RA2 | bidirectional | General purpose I/O with IOC; also AN2, C1OUT, DAC1OUT2, T0CKI, INT, PWM3, CLC1 and CWG1FLT. |
| 18 | RA1/ICSPCLK | bidirectional | General purpose I/O with IOC; also AN1, VREF+, C1IN0-/C2IN0-, CLC4IN1, ICSP programming clock (ICSPCLK) and ICDCLK. |
| 19 | RA0/ICSPDAT | bidirectional | General purpose I/O with IOC; also AN0, C1IN+, DAC1OUT1, ICSP data I/O (ICSPDAT) and ICDDAT. |
| 20 | VSS | power_in | Ground reference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-20-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 308 | |||
| Storage temperature | -65 | 150 | °C | 308 | |||
| Voltage on VDD pin (PIC16LF1508/9) | VDD | -0.3 | 4 | V | with respect to VSS | 308 | |
| Voltage on MCLR pin | -0.3 | 9 | V | with respect to VSS | 308 | ||
| Voltage on all other pins | -0.3 | V | -0.3V to (VDD + 0.3V) | 308 | |||
| Maximum current on VSS pin | 250 | mA | -40°C ≤ TA ≤ +85°C | 308 | |||
| Maximum current on VSS pin | 85 | mA | +85°C ≤ TA ≤ +125°C | 308 | |||
| Maximum current on VDD pin | 250 | mA | -40°C ≤ TA ≤ +85°C | 308 | |||
| Maximum current on VDD pin | 85 | mA | +85°C ≤ TA ≤ +125°C | 308 | |||
| Current sunk by any standard I/O pin | 50 | mA | 308 | ||||
| Current sourced by any standard I/O pin | 50 | mA | 308 | ||||
| Clamp current | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 308 | ||
| Operating supply voltage | VDD | 1.8 | 3.6 | V | FOSC ≤ 16 MHz | 311 | |
| Operating supply voltage | VDD | 2.5 | 3.6 | V | FOSC ≤ 20 MHz | 311 | |
| Operating ambient temperature (Industrial) | TA | -40 | 85 | °C | Industrial Temperature | 309 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | Device in Sleep mode | 311 | ||
| Power-on Reset Release Voltage | VPOR | 1.6 | V | 311 | |||
| Power-on Reset Rearm Voltage | VPORR | 0.8 | V | 311 | |||
| Fixed Voltage Reference Voltage, 1x gain (1.024V nominal) | VFVR | -4 | 4 | % | VDD ≥ 2.5V, -40°C ≤ TA ≤ +85°C | 311 | |
| VDD Rise Rate | SVDD | 0.05 | V/ms | Ensures that the Power-on Reset signal is released properly. | 311 | ||
| Supply current, LP oscillator | IDD | 8 | 20 | µA | VDD = 1.8V, FOSC = 32 kHz, LP Oscillator, -40°C ≤ TA ≤ +85°C | 313 | |
| Supply current, XT oscillator | IDD | 60 | 100 | µA | VDD = 1.8V, FOSC = 1 MHz, XT Oscillator | 313 | |
| Supply current, XT oscillator | IDD | 140 | 240 | µA | VDD = 1.8V, FOSC = 4 MHz, XT Oscillator | 313 | |
| Supply current, LFINTOSC | IDD | 3.2 | 12 | µA | VDD = 1.8V, FOSC = 31 kHz, LFINTOSC, -40°C ≤ TA ≤ +85°C | 313 | |
| Supply current, HFINTOSC | IDD | 215 | 360 | µA | VDD = 1.8V, FOSC = 500 kHz, HFINTOSC | 314 | |
| Supply current, HFINTOSC | IDD | 410 | 660 | µA | VDD = 1.8V, FOSC = 8 MHz, HFINTOSC | 314 | |
| Supply current, HFINTOSC | IDD | 600 | 940 | µA | VDD = 1.8V, FOSC = 16 MHz, HFINTOSC | 314 | |
| Supply current, ECH | IDD | 1030 | 1500 | µA | VDD = 3.0V, FOSC = 20 MHz, External Clock (ECH), High-Power mode | 314 | |
| Base power-down current | IPD | 0.02 | 1 | µA | VDD = 1.8V, +85°C max, WDT, BOR, FVR and SOSC disabled, all peripherals inactive | 316 | |
| Base power-down current | IPD | 0.02 | 8 | µA | VDD = 1.8V, +125°C max, WDT, BOR, FVR and SOSC disabled, all peripherals inactive | 316 | |
| Base power-down current | IPD | 0.025 | 2 | µA | VDD = 3.0V, +85°C max, WDT, BOR, FVR and SOSC disabled, all peripherals inactive | 316 | |
| WDT current | IPD | 0.26 | 2 | µA | VDD = 1.8V, +85°C max | 316 | |
| FVR current | IPD | 15 | 28 | µA | VDD = 1.8V, +85°C max | 316 | |
| Input Low Voltage, TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 318 | ||
| Input Leakage Current, I/O Ports | IIL | -125 | 125 | nA | VSS ≤ VPIN ≤ VDD, Pin at high-impedance, 85°C | 318 | |
| Weak Pull-up Current | IPUR | 25 | 100 | 200 | µA | VDD = 3.3V, VPIN = VSS | 318 |
| Output Low Voltage, I/O Ports | VOL | 0.6 | V | IOL = 8 mA, VDD = 5V; IOL = 6 mA, VDD = 3.3V; IOL = 1.8 mA, VDD = 1.8V | 318 | ||
| Capacitive loading on OSC2 pin | COSC2 | 15 | pF | In XT, HS, LP modes when external clock is used to drive OSC1 | 318 | ||
| Capacitive loading on all I/O pins | CIO | 50 | pF | 318 | |||
| HFINTOSC wake-up from Sleep start-up time | TIOSC ST | 5 | 15 | µs | 322 | ||
| Internal calibrated HFINTOSC frequency | HFOSC | 16 | MHz | VDD = 3.0V, TA = 25°C, ±2% tolerance | 322 | ||
| Internal LFINTOSC frequency | LFOSC | 31 | kHz | 322 | |||
| Power-up Timer Period | TPWRT | 40 | 65 | 140 | ms | PWRTE = 0 | 325 |
| Brown-out Reset Voltage | VBOR | 1.8 | 1.9 | 2.05 | V | BORV = 1 (PIC16LF1508/9) | 325 |
| Brown-out Reset Hysteresis | VHYST | 0 | 25 | 75 | mV | -40°C ≤ TA ≤ +85°C | 325 |
| Low-Power Brown-out Reset Voltage | VLPBOR | 1.8 | 2.1 | 2.5 | V | LPBOR = 1 | 325 |
| ADC Resolution | NR | 10 | bit | VDD = 3.0V, TA = 25°C | 328 | ||
| ADC Integral Error | EIL | -1.7 | 1.7 | LSb | VREF = 3.0V | 328 | |
| ADC Offset Error | EOFF | -2.5 | 2.5 | LSb | VREF = 3.0V | 328 | |
| ADC Gain Error | EGN | -2 | 2 | LSb | VREF = 3.0V | 328 | |
| ADC Reference Voltage | VREF | 1.8 | V | VREF = (VRPOS - VRNEG) | 328 | ||
| Comparator Input Offset Voltage | VIOFF | -60 | 60 | mV | CxSP = 1, VICM = VDD/2 | 330 | |
| Thermal Resistance Junction to Ambient, 20-pin SSOP | θJA | 87.3 | °C/W | 20-pin SSOP package | 319 | ||
| Thermal Resistance Junction to Case, 20-pin SSOP | θJC | 31.1 | °C/W | 20-pin SSOP package | 319 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | 319 |
CAD (KiCad official)
- Symbol:
PIC16LF1509-I - Footprint:
Package_SO:SSOP-20_5.3x7.2mm_P0.65mm - 3D model: SSOP-20-208mil (KiCad packages3D, STEP)
- 3D model files:
pic16lf1509-i-etched.step/pic16lf1509-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16lf1509-i.step/pic16lf1509-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (401 pp, sha256
e20039190e4bde55, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).