Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16LF1509-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-20-208mil

PIC16LF1509-I from Microchip Tech, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply; PIC16LF1509 operates from 1.8V to 3.6V.
2 RA5 bidirectional General purpose I/O with IOC and weak pull-up; also CLKIN/OSC1, T1CKI, NCO1CLK and SOSCI.
3 RA4 bidirectional General purpose I/O with IOC and weak pull-up; also AN3, SOSCO, CLKOUT/OSC2 and T1G.
4 RA3 input Input-only pin (TRIS bit always reads 1) with IOC and weak pull-up; Master Clear (MCLR) with internal pull-up, VPP programming voltage, plus CLC1IN0 and alternate T1G/SS.
5 RC5 bidirectional General purpose I/O; also PWM1 output, CWG1A primary output and CLC1 output (alternate pin).
6 RC4 bidirectional General purpose I/O; also C2OUT, CLC2IN1, CLC4 output and CWG1B complementary output.
7 RC3 bidirectional General purpose I/O; also AN7, C1IN3-/C2IN3- comparator negative inputs, PWM2 output and CLC2IN0.
8 RC6 bidirectional General purpose I/O; also AN8, NCO1 output (alternate pin), CLC3IN1 and SS.
9 RC7 bidirectional General purpose I/O; also AN9, CLC1IN1 and SPI data output SDO.
10 RB7 bidirectional General purpose I/O with IOC and weak pull-up; also CLC3 output, EUSART TX and synchronous clock CK.
11 RB6 bidirectional General purpose I/O with IOC and weak pull-up; also I2C clock SCL and SPI clock SCK.
12 RB5 bidirectional General purpose I/O with IOC and weak pull-up; also AN11, CLC4IN0, EUSART RX and synchronous data DT.
13 RB4 bidirectional General purpose I/O with IOC and weak pull-up; also AN10, CLC3IN0, I2C data SDA and SPI data input SDI.
14 RC2 bidirectional General purpose I/O; also AN6 and C1IN2-/C2IN2- comparator negative inputs.
15 RC1 bidirectional General purpose I/O; also AN5, C1IN1-/C2IN1-, PWM4 output and NCO1 output.
16 RC0 bidirectional General purpose I/O; also AN4, CLC2 output and C2IN+ comparator positive input.
17 RA2 bidirectional General purpose I/O with IOC; also AN2, C1OUT, DAC1OUT2, T0CKI, INT, PWM3, CLC1 and CWG1FLT.
18 RA1/ICSPCLK bidirectional General purpose I/O with IOC; also AN1, VREF+, C1IN0-/C2IN0-, CLC4IN1, ICSP programming clock (ICSPCLK) and ICDCLK.
19 RA0/ICSPDAT bidirectional General purpose I/O with IOC; also AN0, C1IN+, DAC1OUT1, ICSP data I/O (ICSPDAT) and ICDDAT.
20 VSS power_in Ground reference.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-20-208mil
Category Single Chip Microcomputer/Microcontroller
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 125 °C 308
Storage temperature -65 150 °C 308
Voltage on VDD pin (PIC16LF1508/9) VDD -0.3 4 V with respect to VSS 308
Voltage on MCLR pin -0.3 9 V with respect to VSS 308
Voltage on all other pins -0.3 V -0.3V to (VDD + 0.3V) 308
Maximum current on VSS pin 250 mA -40°C ≤ TA ≤ +85°C 308
Maximum current on VSS pin 85 mA +85°C ≤ TA ≤ +125°C 308
Maximum current on VDD pin 250 mA -40°C ≤ TA ≤ +85°C 308
Maximum current on VDD pin 85 mA +85°C ≤ TA ≤ +125°C 308
Current sunk by any standard I/O pin 50 mA 308
Current sourced by any standard I/O pin 50 mA 308
Clamp current IK 20 mA VPIN < 0 or VPIN > VDD 308
Operating supply voltage VDD 1.8 3.6 V FOSC ≤ 16 MHz 311
Operating supply voltage VDD 2.5 3.6 V FOSC ≤ 20 MHz 311
Operating ambient temperature (Industrial) TA -40 85 °C Industrial Temperature 309
RAM Data Retention Voltage VDR 1.5 V Device in Sleep mode 311
Power-on Reset Release Voltage VPOR 1.6 V 311
Power-on Reset Rearm Voltage VPORR 0.8 V 311
Fixed Voltage Reference Voltage, 1x gain (1.024V nominal) VFVR -4 4 % VDD ≥ 2.5V, -40°C ≤ TA ≤ +85°C 311
VDD Rise Rate SVDD 0.05 V/ms Ensures that the Power-on Reset signal is released properly. 311
Supply current, LP oscillator IDD 8 20 µA VDD = 1.8V, FOSC = 32 kHz, LP Oscillator, -40°C ≤ TA ≤ +85°C 313
Supply current, XT oscillator IDD 60 100 µA VDD = 1.8V, FOSC = 1 MHz, XT Oscillator 313
Supply current, XT oscillator IDD 140 240 µA VDD = 1.8V, FOSC = 4 MHz, XT Oscillator 313
Supply current, LFINTOSC IDD 3.2 12 µA VDD = 1.8V, FOSC = 31 kHz, LFINTOSC, -40°C ≤ TA ≤ +85°C 313
Supply current, HFINTOSC IDD 215 360 µA VDD = 1.8V, FOSC = 500 kHz, HFINTOSC 314
Supply current, HFINTOSC IDD 410 660 µA VDD = 1.8V, FOSC = 8 MHz, HFINTOSC 314
Supply current, HFINTOSC IDD 600 940 µA VDD = 1.8V, FOSC = 16 MHz, HFINTOSC 314
Supply current, ECH IDD 1030 1500 µA VDD = 3.0V, FOSC = 20 MHz, External Clock (ECH), High-Power mode 314
Base power-down current IPD 0.02 1 µA VDD = 1.8V, +85°C max, WDT, BOR, FVR and SOSC disabled, all peripherals inactive 316
Base power-down current IPD 0.02 8 µA VDD = 1.8V, +125°C max, WDT, BOR, FVR and SOSC disabled, all peripherals inactive 316
Base power-down current IPD 0.025 2 µA VDD = 3.0V, +85°C max, WDT, BOR, FVR and SOSC disabled, all peripherals inactive 316
WDT current IPD 0.26 2 µA VDD = 1.8V, +85°C max 316
FVR current IPD 15 28 µA VDD = 1.8V, +85°C max 316
Input Low Voltage, TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 318
Input Leakage Current, I/O Ports IIL -125 125 nA VSS ≤ VPIN ≤ VDD, Pin at high-impedance, 85°C 318
Weak Pull-up Current IPUR 25 100 200 µA VDD = 3.3V, VPIN = VSS 318
Output Low Voltage, I/O Ports VOL 0.6 V IOL = 8 mA, VDD = 5V; IOL = 6 mA, VDD = 3.3V; IOL = 1.8 mA, VDD = 1.8V 318
Capacitive loading on OSC2 pin COSC2 15 pF In XT, HS, LP modes when external clock is used to drive OSC1 318
Capacitive loading on all I/O pins CIO 50 pF 318
HFINTOSC wake-up from Sleep start-up time TIOSC ST 5 15 µs 322
Internal calibrated HFINTOSC frequency HFOSC 16 MHz VDD = 3.0V, TA = 25°C, ±2% tolerance 322
Internal LFINTOSC frequency LFOSC 31 kHz 322
Power-up Timer Period TPWRT 40 65 140 ms PWRTE = 0 325
Brown-out Reset Voltage VBOR 1.8 1.9 2.05 V BORV = 1 (PIC16LF1508/9) 325
Brown-out Reset Hysteresis VHYST 0 25 75 mV -40°C ≤ TA ≤ +85°C 325
Low-Power Brown-out Reset Voltage VLPBOR 1.8 2.1 2.5 V LPBOR = 1 325
ADC Resolution NR 10 bit VDD = 3.0V, TA = 25°C 328
ADC Integral Error EIL -1.7 1.7 LSb VREF = 3.0V 328
ADC Offset Error EOFF -2.5 2.5 LSb VREF = 3.0V 328
ADC Gain Error EGN -2 2 LSb VREF = 3.0V 328
ADC Reference Voltage VREF 1.8 V VREF = (VRPOS - VRNEG) 328
Comparator Input Offset Voltage VIOFF -60 60 mV CxSP = 1, VICM = VDD/2 330
Thermal Resistance Junction to Ambient, 20-pin SSOP θJA 87.3 °C/W 20-pin SSOP package 319
Thermal Resistance Junction to Case, 20-pin SSOP θJC 31.1 °C/W 20-pin SSOP package 319
Maximum Junction Temperature TJMAX 150 °C 319

CAD (KiCad official)

  • Symbol: PIC16LF1509-I
  • Footprint: Package_SO:SSOP-20_5.3x7.2mm_P0.65mm
  • 3D model: SSOP-20-208mil (KiCad packages3D, STEP)
  • 3D model files: pic16lf1509-i-etched.step / pic16lf1509-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16lf1509-i.step / pic16lf1509-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (401 pp, sha256 e20039190e4bde55, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF