main
Ray Publish 0.1.0 fa7e758

PIC16LC72A-04I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil

PIC16LC72A-04I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR/VPP input Active-low master clear (reset) input to the device, or the programming voltage input.
2 RA0/AN0 bidirectional PORTA bidirectional TTL I/O pin that can also be analog input 0.
3 RA1/AN1 bidirectional PORTA bidirectional TTL I/O pin that can also be analog input 1.
4 RA2/AN2 bidirectional PORTA bidirectional TTL I/O pin that can also be analog input 2.
5 RA3/AN3/VREF bidirectional PORTA bidirectional TTL I/O pin that can also be analog input 3 or the analog reference voltage.
6 RA4/T0CKI bidirectional PORTA Schmitt-trigger I/O pin that can also be the clock input to the Timer0 module, and whose output is open drain.
7 RA5/SS/AN4 bidirectional PORTA bidirectional TTL I/O pin that can also be analog input 4 or the slave select for the synchronous serial port.
8 VSS power_in Ground reference for logic and I/O pins.
9 OSC1/CLKIN input Oscillator crystal input or external clock source input; Schmitt trigger input in RC oscillator mode and CMOS input otherwise.
10 OSC2/CLKOUT output Oscillator crystal output connecting to a crystal or resonator in crystal mode; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency, denoting the instruction cycle rate.
11 RC0/T1OSO/T1CKI bidirectional PORTC Schmitt-trigger I/O pin that can also be the Timer1 oscillator output or the Timer1 clock input.
12 RC1/T1OSI bidirectional PORTC Schmitt-trigger I/O pin that can also be the Timer1 oscillator input.
13 RC2/CCP1 bidirectional PORTC Schmitt-trigger I/O pin that can also be the Capture1 input, Compare1 output, or PWM1 output.
14 RC3/SCK/SCL bidirectional PORTC Schmitt-trigger I/O pin that is the synchronous serial clock input/output for both SPI and I2C modes.
15 RC4/SDI/SDA bidirectional PORTC Schmitt-trigger I/O pin that is the SPI data input (SPI mode) or the data I/O (I2C mode).
16 RC5/SDO bidirectional PORTC Schmitt-trigger I/O pin that is the SPI data output (SPI mode) or the synchronous serial port data output.
17 RC6 bidirectional PORTC Schmitt-trigger bidirectional I/O port pin.
18 RC7 bidirectional PORTC Schmitt-trigger bidirectional I/O port pin.
19 VSS power_in Ground reference for logic and I/O pins.
20 VDD power_in Positive supply for logic and I/O pins.
21 RB0/INT bidirectional PORTB bidirectional I/O pin with weak pull-up option that can also be the external interrupt pin, using a Schmitt-trigger buffer when configured as the interrupt.
22 RB1 bidirectional PORTB bidirectional TTL I/O pin with programmable internal weak pull-up.
23 RB2 bidirectional PORTB bidirectional TTL I/O pin with programmable internal weak pull-up.
24 RB3 bidirectional PORTB bidirectional TTL I/O pin with programmable internal weak pull-up.
25 RB4 bidirectional PORTB bidirectional TTL I/O pin with programmable internal weak pull-up that provides the interrupt-on-change function.
26 RB5 bidirectional PORTB bidirectional TTL I/O pin with programmable internal weak pull-up that provides the interrupt-on-change function.
27 RB6 bidirectional PORTB bidirectional I/O pin with programmable internal weak pull-up providing interrupt-on-change and serving as the serial programming clock, with a Schmitt-trigger input in programming mode.
28 RB7 bidirectional PORTB bidirectional I/O pin with programmable internal weak pull-up providing interrupt-on-change and serving as the serial programming data, with a Schmitt-trigger input in programming mode.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-28-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -55 125 °C 81
Storage temperature -65 150 °C 81
Voltage on any pin with respect to VSS (except VDD, MCLR, and RA4) -0.3 V 81
Voltage on VDD with respect to VSS -0.3 7.5 V 81
Voltage on MCLR with respect to VSS (Note 2) 0 13.25 V 81
Voltage on RA4 with respect to VSS 0 8.5 V 81
Total power dissipation (Note 1) 1 W 81
Input clamp current IIK 20 mA VI < 0 or VI > VDD 81
Output clamp current IOK 20 mA VO < 0 or VO > VDD 81
Operating temperature (industrial) TA -40 85 °C -40°C TA +85°C for industrial 85
VDD Supply Voltage VDD 2.5 5.5 V LP, XT, RC osc modes (DC - 4 MHz) 85
VDD Supply Voltage, BOR enabled VBOR 5.5 V BOR enabled (Note 7) 85
VDD Rise Rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms PWRT enabled (PWRTE bit clear) 85
Brown-out Reset voltage trip point VBOR 3.65 4.35 V BODEN bit set 85
Supply Current (XT, RC osc modes) IDD 2 3.8 mA XT, RC osc modes; FOSC = 4 MHz, VDD = 3.0V (Note 4) 85
Supply Current (LP osc mode) IDD 22.5 48 µA LP OSC MODE; FOSC = 32 kHz, VDD = 3.0V, WDT disabled 85
Power-down Current IPD 7.5 30 µA VDD = 3.0V, WDT enabled, -40C to +85C 85
Power-down Current IPD 0.9 5 µA VDD = 3.0V, WDT disabled, 0C to +70C 85
Module Differential Current, Watchdog Timer IWDT 6 20 µA WDTE BIT SET, VDD = 4.0V 85
Module Differential Current, Brown-out Reset IBOR 200 µA BODEN bit set, VDD = 5.0V 85
Input Low Voltage, I/O ports with TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 86
Input High Voltage, I/O ports with TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V 86
Input Leakage Current, I/O ports IIL 1 µA Vss ≤ VPIN ≤ VDD, Pin at hi-impedance 86
Input Leakage Current, MCLR, RA4/T0CKI IIL 5 µA Vss ≤ VPIN ≤ VDD 86
Input Leakage Current, OSC1 IIL 5 µA Vss ≤ VPIN ≤ VDD, XT, HS and LP osc modes 86
PORTB weak pull-up current IPURB 50 250 400 µA VDD = 5V, VPIN = VSS 86
Output Low Voltage, I/O ports VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V, -40C to +85C 86
Output Low Voltage, OSC2/CLKOUT (RC osc mode) VOL 0.6 V IOL = 1.6 mA, VDD = 4.5V, -40C to +85C 87
Open-Drain High Voltage VOD 8.5 V RA4 pin 87
OSC2 pin capacitive loading COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1. 87
Capacitive loading, All I/O pins and OSC2 (in RC mode) CIO 50 pF 87
Capacitive loading, SCL, SDA in I2C mode Cb 400 pF 87
Oscillator Frequency (XT osc mode) Fosc 0.1 4 MHz XT osc mode 90
Oscillator Frequency (LP osc mode) Fosc 5 200 kHz LP osc mode 90
Oscillator Frequency (RC osc mode) Fosc 4 MHz RC osc mode 90
External CLKIN Frequency (HS osc mode -04) Fosc 4 MHz HS osc mode (-04) 90
Oscillator Period (XT osc mode) Tosc 250 10000 ns XT osc mode 90
Oscillator Period (LP osc mode) Tosc 5 µs LP osc mode 90
Instruction Cycle Time TCY 200 ns TCY = 4/FOSC 90
External Clock in (OSC1) High or Low Time (XT oscillator) TosL, TosH 100 ns XT oscillator 90
External Clock in (OSC1) Rise or Fall Time (XT oscillator) TosR, TosF 25 ns XT oscillator 90
CLKOUT rise time TckR 35 100 ns Note 1 91
CLKOUT fall time TckF 35 100 ns Note 1 91
OSC1 (Q1 cycle) to Port out valid TosH2ioV 50 150 ns 91
OSC1 (Q2 cycle) to Port input invalid (I/O in hold time), PIC16LCXX TosH2ioI 200 ns 91
Port output rise time, PIC16LCXX TioR 80 ns 91
Port output fall time, PIC16LCXX TioF 80 ns 91
Reference voltage VREF 2.5 V 101
Recommended impedance of analog voltage source ZAIN 10 kΩ 101
A/D clock period, PIC16LCXX (TOSC based) TAD 2 µs TOSC based, VREF full range 102
A/D clock period, PIC16LCXX (A/D RC mode) TAD 3 6 9 µs A/D RC Mode 102

CAD (KiCad official)

  • Symbol: PIC16LC72A-04I
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: pic16lc72a-04i-etched.step / pic16lc72a-04i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16lc72a-04i.step / pic16lc72a-04i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (122 pp, sha256 001eda69b9433079, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF