main
Ray Publish 0.1.0 d6c2672

PIC16LC505-04I

Microchip Tech · Pre-ordered MCUs · SOIC-14

PIC16LC505-04I from Microchip Tech, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply for logic and I/O pins.
2 RB5/OSC1/CLKIN bidirectional Bidirectional I/O port and oscillator crystal input or external clock source input (RB5 in Internal RC mode only, OSC1 in all other oscillator modes); TTL input when used as RB5 and Schmitt Trigger input in external RC oscillator mode.
3 RB4/OSC2/CLKOUT bidirectional Bidirectional I/O port and oscillator crystal output (XT and LP modes only, RB4 in other modes), with weak pull-up and SLEEP wake-up on pin change selectable in software; in EXTRC and INTRC modes it can be configured as CLKOUT at 1/4 the OSC1 frequency.
4 RB3/MCLR/VPP input Input port, master clear (active low reset) input, or programming voltage input; voltage on MCLR/VPP must not exceed VDD during normal device operation, and the weak pull-up is available only when configured as RB3.
5 RC5/T0CKI bidirectional Bidirectional I/O port with Schmitt Trigger input that can be configured as the Timer0 external clock input T0CKI.
6 RC4 bidirectional Bidirectional I/O port with TTL input levels.
7 RC3 bidirectional Bidirectional I/O port with TTL input levels.
8 RC2 bidirectional Bidirectional I/O port with TTL input levels.
9 RC1 bidirectional Bidirectional I/O port with TTL input levels.
10 RC0 bidirectional Bidirectional I/O port with TTL input levels.
11 RB2 bidirectional Bidirectional I/O port with TTL input levels.
12 RB1 bidirectional Bidirectional I/O port with weak pull-up and SLEEP wake-up on pin change selectable in software; serves as the serial programming clock, with a Schmitt Trigger input in serial programming mode.
13 RB0 bidirectional Bidirectional I/O port with weak pull-up and SLEEP wake-up on pin change selectable in software; serves as the serial programming data pin, with a Schmitt Trigger input in serial programming mode.
14 VSS power_in Ground reference for logic and I/O pins.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-14
Category Single Chip Microcomputer/Microcontroller
Pins 14

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 125 °C 55
Storage Temperature -65 150 °C 55
Voltage on VDD with respect to VSS 0 7 V 55
Voltage on MCLR with respect to VSS 0 14 V 55
Voltage on all other pins with respect to VSS -0.6 V 55
Max. Current out of VSS pin 150 mA 55
Max. Current into VDD pin 125 mA 55
Input Clamp Current IIK 20 mA VI < 0 or VI > VDD 55
Output Clamp Current IOK 20 mA VO < 0 or VO > VDD 55
Max. Output Current sunk by any I/O pin 25 mA 55
Max. Output Current sourced by any I/O pin 25 mA 55
Operating temperature (industrial) TA -40 85 °C Industrial, Standard Operating Conditions 59
Supply Voltage VDD 2.5 5.5 V See Figure 10-1 through Figure 10-3 59
VDD Rise Rate to ensure Power-on Reset SVDD 0.05 V/ms See section on Power-on Reset for details 59
Supply Current IDD 0.8 1.4 mA FOSC = 4MHz, VDD = 5.5V, WDT disabled (Note 4) 59
Supply Current IDD 0.4 0.8 mA FOSC = 4MHz, VDD = 2.5V, WDT disabled (Note 4) 59
Supply Current IDD 15 23 µA FOSC = 32kHz, VDD = 2.5V, WDT disabled (Note 6) 59
Power-Down Current IPD 0.25 3 µA VDD = 2.5V (Note 6) 59
Power-Down Current IPD 0.25 4 µA VDD = 3.0V (Note 6) 59
Power-Down Current IPD 3 8 µA VDD = 5.5V, Industrial 59
WDT Current IWDT 2 4 µA VDD = 2.5V (Note 6) 59
LP Oscillator Operating Frequency FOSC 0 200 kHz All temperatures 59
RC Oscillator Operating Frequency FOSC 0 4 MHz All temperatures 59
XT Oscillator Operating Frequency FOSC 0 4 MHz All temperatures 59
HS Oscillator Operating Frequency FOSC 0 4 MHz All temperatures 59
Input Low Voltage, I/O ports with TTL buffer VIL 0.8 V For all 4.5 ≤ VDD ≤ 5.5V 60
Input High Voltage, I/O ports with TTL buffer VIH 2 V 4.5 ≤ VDD ≤ 5.5V 60
GPIO weak pull-up current IPUR 50 250 400 µA VDD = 5V, VPIN = VSS 60
Input Leakage Current, I/O ports IIL -1 1 µA Vss ≤ VPIN ≤ VDD, Pin at hi-impedance 60
Input Leakage Current, GP3/MCLRI (Note 5) IIL -30 30 µA Vss ≤ VPIN ≤ VDD 60
Input Leakage Current, GP3/MCLRI (Note 6) IIL -5 5 µA Vss ≤ VPIN ≤ VDD 60
Input Leakage Current, OSC1 IIL -5 5 µA Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration 60
Output Low Voltage, I/O ports/CLKOUT VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C 60
Output Low Voltage, OSC2 VOL 0.6 V IOL = 1.6 mA, VDD = 4.5V, -40°C to +85°C 60
Capacitive loading, OSC2 pin COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 61
Capacitive loading, All I/O pins and OSC2 CIO 50 pF 61
Pull-up resistor, RB0/RB1/RB4 38 42 63 kΩ VDD = 2.5 V, Temperature -40 °C 62
Pull-up resistor, RB0/RB1/RB4 42 48 63 kΩ VDD = 2.5 V, Temperature 25 °C 62
Pull-up resistor, RB0/RB1/RB4 42 49 63 kΩ VDD = 2.5 V, Temperature 85 °C 62
Pull-up resistor, RB0/RB1/RB4 50 55 63 kΩ VDD = 2.5 V, Temperature 125 °C 62
Pull-up resistor, RB0/RB1/RB4 15 17 20 kΩ VDD = 5.5 V, Temperature -40 °C 62
Pull-up resistor, RB0/RB1/RB4 18 20 23 kΩ VDD = 5.5 V, Temperature 25 °C 62
Pull-up resistor, RB0/RB1/RB4 19 22 25 kΩ VDD = 5.5 V, Temperature 85 °C 62
Pull-up resistor, RB0/RB1/RB4 22 24 28 kΩ VDD = 5.5 V, Temperature 125 °C 62
Pull-up resistor, RB3 285 346 417 kΩ VDD = 2.5 V, Temperature -40 °C 62
Pull-up resistor, RB3 343 414 532 kΩ VDD = 2.5 V, Temperature 25 °C 62
Pull-up resistor, RB3 368 457 532 kΩ VDD = 2.5 V, Temperature 85 °C 62
Pull-up resistor, RB3 431 504 593 kΩ VDD = 2.5 V, Temperature 125 °C 62
Pull-up resistor, RB3 247 292 360 kΩ VDD = 5.5 V, Temperature -40 °C 62
Pull-up resistor, RB3 288 341 437 kΩ VDD = 5.5 V, Temperature 25 °C 62
Pull-up resistor, RB3 306 371 448 kΩ VDD = 5.5 V, Temperature 85 °C 62
Pull-up resistor, RB3 351 407 500 kΩ VDD = 5.5 V, Temperature 125 °C 62
Internal Calibrated RC Frequency 3.65 4 4.28 MHz VDD = 5.0V 65
Internal Calibrated RC Frequency 3.55 4 4.31 MHz VDD = 2.5V 65
Watchdog Timer Time-out Period (No Prescaler) Twdt 9 18 30 ms VDD = 5.0 V (Commercial) 67
Device Reset Timer Period TDRT 9 18 30 ms VDD = 5.0 V (Commercial) 67
MCLR Pulse Width (low) TmcL 2000 ns VDD = 5.0 V 67

CAD (KiCad official)

  • Symbol: PIC16LC505-04I
  • Footprint: Package_SO:SOIC-14_3.9x8.7mm_P1.27mm
  • 3D model: SOIC-14 (KiCad packages3D, STEP)
  • 3D model files: pic16lc505-04i-etched.step / pic16lc505-04i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16lc505-04i.step / pic16lc505-04i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (90 pp, sha256 9789b403a724b02f, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF