Generated by kicad-footprint-generator · KiCad file format 20260206
PIC16LC505-04I
Microchip Tech · Pre-ordered MCUs · SOIC-14
PIC16LC505-04I from Microchip Tech, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply for logic and I/O pins. |
| 2 | RB5/OSC1/CLKIN | bidirectional | Bidirectional I/O port and oscillator crystal input or external clock source input (RB5 in Internal RC mode only, OSC1 in all other oscillator modes); TTL input when used as RB5 and Schmitt Trigger input in external RC oscillator mode. |
| 3 | RB4/OSC2/CLKOUT | bidirectional | Bidirectional I/O port and oscillator crystal output (XT and LP modes only, RB4 in other modes), with weak pull-up and SLEEP wake-up on pin change selectable in software; in EXTRC and INTRC modes it can be configured as CLKOUT at 1/4 the OSC1 frequency. |
| 4 | RB3/MCLR/VPP | input | Input port, master clear (active low reset) input, or programming voltage input; voltage on MCLR/VPP must not exceed VDD during normal device operation, and the weak pull-up is available only when configured as RB3. |
| 5 | RC5/T0CKI | bidirectional | Bidirectional I/O port with Schmitt Trigger input that can be configured as the Timer0 external clock input T0CKI. |
| 6 | RC4 | bidirectional | Bidirectional I/O port with TTL input levels. |
| 7 | RC3 | bidirectional | Bidirectional I/O port with TTL input levels. |
| 8 | RC2 | bidirectional | Bidirectional I/O port with TTL input levels. |
| 9 | RC1 | bidirectional | Bidirectional I/O port with TTL input levels. |
| 10 | RC0 | bidirectional | Bidirectional I/O port with TTL input levels. |
| 11 | RB2 | bidirectional | Bidirectional I/O port with TTL input levels. |
| 12 | RB1 | bidirectional | Bidirectional I/O port with weak pull-up and SLEEP wake-up on pin change selectable in software; serves as the serial programming clock, with a Schmitt Trigger input in serial programming mode. |
| 13 | RB0 | bidirectional | Bidirectional I/O port with weak pull-up and SLEEP wake-up on pin change selectable in software; serves as the serial programming data pin, with a Schmitt Trigger input in serial programming mode. |
| 14 | VSS | power_in | Ground reference for logic and I/O pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-14 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 55 | |||
| Storage Temperature | -65 | 150 | °C | 55 | |||
| Voltage on VDD with respect to VSS | 0 | 7 | V | 55 | |||
| Voltage on MCLR with respect to VSS | 0 | 14 | V | 55 | |||
| Voltage on all other pins with respect to VSS | -0.6 | V | 55 | ||||
| Max. Current out of VSS pin | 150 | mA | 55 | ||||
| Max. Current into VDD pin | 125 | mA | 55 | ||||
| Input Clamp Current | IIK | 20 | mA | VI < 0 or VI > VDD | 55 | ||
| Output Clamp Current | IOK | 20 | mA | VO < 0 or VO > VDD | 55 | ||
| Max. Output Current sunk by any I/O pin | 25 | mA | 55 | ||||
| Max. Output Current sourced by any I/O pin | 25 | mA | 55 | ||||
| Operating temperature (industrial) | TA | -40 | 85 | °C | Industrial, Standard Operating Conditions | 59 | |
| Supply Voltage | VDD | 2.5 | 5.5 | V | See Figure 10-1 through Figure 10-3 | 59 | |
| VDD Rise Rate to ensure Power-on Reset | SVDD | 0.05 | V/ms | See section on Power-on Reset for details | 59 | ||
| Supply Current | IDD | 0.8 | 1.4 | mA | FOSC = 4MHz, VDD = 5.5V, WDT disabled (Note 4) | 59 | |
| Supply Current | IDD | 0.4 | 0.8 | mA | FOSC = 4MHz, VDD = 2.5V, WDT disabled (Note 4) | 59 | |
| Supply Current | IDD | 15 | 23 | µA | FOSC = 32kHz, VDD = 2.5V, WDT disabled (Note 6) | 59 | |
| Power-Down Current | IPD | 0.25 | 3 | µA | VDD = 2.5V (Note 6) | 59 | |
| Power-Down Current | IPD | 0.25 | 4 | µA | VDD = 3.0V (Note 6) | 59 | |
| Power-Down Current | IPD | 3 | 8 | µA | VDD = 5.5V, Industrial | 59 | |
| WDT Current | IWDT | 2 | 4 | µA | VDD = 2.5V (Note 6) | 59 | |
| LP Oscillator Operating Frequency | FOSC | 0 | 200 | kHz | All temperatures | 59 | |
| RC Oscillator Operating Frequency | FOSC | 0 | 4 | MHz | All temperatures | 59 | |
| XT Oscillator Operating Frequency | FOSC | 0 | 4 | MHz | All temperatures | 59 | |
| HS Oscillator Operating Frequency | FOSC | 0 | 4 | MHz | All temperatures | 59 | |
| Input Low Voltage, I/O ports with TTL buffer | VIL | 0.8 | V | For all 4.5 ≤ VDD ≤ 5.5V | 60 | ||
| Input High Voltage, I/O ports with TTL buffer | VIH | 2 | V | 4.5 ≤ VDD ≤ 5.5V | 60 | ||
| GPIO weak pull-up current | IPUR | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 60 |
| Input Leakage Current, I/O ports | IIL | -1 | 1 | µA | Vss ≤ VPIN ≤ VDD, Pin at hi-impedance | 60 | |
| Input Leakage Current, GP3/MCLRI (Note 5) | IIL | -30 | 30 | µA | Vss ≤ VPIN ≤ VDD | 60 | |
| Input Leakage Current, GP3/MCLRI (Note 6) | IIL | -5 | 5 | µA | Vss ≤ VPIN ≤ VDD | 60 | |
| Input Leakage Current, OSC1 | IIL | -5 | 5 | µA | Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 60 | |
| Output Low Voltage, I/O ports/CLKOUT | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C | 60 | ||
| Output Low Voltage, OSC2 | VOL | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40°C to +85°C | 60 | ||
| Capacitive loading, OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 61 | ||
| Capacitive loading, All I/O pins and OSC2 | CIO | 50 | pF | 61 | |||
| Pull-up resistor, RB0/RB1/RB4 | 38 | 42 | 63 | kΩ | VDD = 2.5 V, Temperature -40 °C | 62 | |
| Pull-up resistor, RB0/RB1/RB4 | 42 | 48 | 63 | kΩ | VDD = 2.5 V, Temperature 25 °C | 62 | |
| Pull-up resistor, RB0/RB1/RB4 | 42 | 49 | 63 | kΩ | VDD = 2.5 V, Temperature 85 °C | 62 | |
| Pull-up resistor, RB0/RB1/RB4 | 50 | 55 | 63 | kΩ | VDD = 2.5 V, Temperature 125 °C | 62 | |
| Pull-up resistor, RB0/RB1/RB4 | 15 | 17 | 20 | kΩ | VDD = 5.5 V, Temperature -40 °C | 62 | |
| Pull-up resistor, RB0/RB1/RB4 | 18 | 20 | 23 | kΩ | VDD = 5.5 V, Temperature 25 °C | 62 | |
| Pull-up resistor, RB0/RB1/RB4 | 19 | 22 | 25 | kΩ | VDD = 5.5 V, Temperature 85 °C | 62 | |
| Pull-up resistor, RB0/RB1/RB4 | 22 | 24 | 28 | kΩ | VDD = 5.5 V, Temperature 125 °C | 62 | |
| Pull-up resistor, RB3 | 285 | 346 | 417 | kΩ | VDD = 2.5 V, Temperature -40 °C | 62 | |
| Pull-up resistor, RB3 | 343 | 414 | 532 | kΩ | VDD = 2.5 V, Temperature 25 °C | 62 | |
| Pull-up resistor, RB3 | 368 | 457 | 532 | kΩ | VDD = 2.5 V, Temperature 85 °C | 62 | |
| Pull-up resistor, RB3 | 431 | 504 | 593 | kΩ | VDD = 2.5 V, Temperature 125 °C | 62 | |
| Pull-up resistor, RB3 | 247 | 292 | 360 | kΩ | VDD = 5.5 V, Temperature -40 °C | 62 | |
| Pull-up resistor, RB3 | 288 | 341 | 437 | kΩ | VDD = 5.5 V, Temperature 25 °C | 62 | |
| Pull-up resistor, RB3 | 306 | 371 | 448 | kΩ | VDD = 5.5 V, Temperature 85 °C | 62 | |
| Pull-up resistor, RB3 | 351 | 407 | 500 | kΩ | VDD = 5.5 V, Temperature 125 °C | 62 | |
| Internal Calibrated RC Frequency | 3.65 | 4 | 4.28 | MHz | VDD = 5.0V | 65 | |
| Internal Calibrated RC Frequency | 3.55 | 4 | 4.31 | MHz | VDD = 2.5V | 65 | |
| Watchdog Timer Time-out Period (No Prescaler) | Twdt | 9 | 18 | 30 | ms | VDD = 5.0 V (Commercial) | 67 |
| Device Reset Timer Period | TDRT | 9 | 18 | 30 | ms | VDD = 5.0 V (Commercial) | 67 |
| MCLR Pulse Width (low) | TmcL | 2000 | ns | VDD = 5.0 V | 67 |
CAD (KiCad official)
- Symbol:
PIC16LC505-04I - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
pic16lc505-04i-etched.step/pic16lc505-04i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16lc505-04i.step/pic16lc505-04i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (90 pp, sha256
9789b403a724b02f, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).