main
Ray
pic16f87-i-so: renamed from pic16f87-i, the part it was built from (PIC16F87-I/SO); family listed
a8a08a2
PIC16F87-I/SO
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-18-300mil
PIC16F87-I from Microchip Tech, in a SOIC-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2/AN2/CVREF | bidirectional | Bidirectional TTL I/O pin that also serves as analog input channel 2 and the comparator VREF output (CVREF). |
| 2 | RA3/AN3/C1OUT | bidirectional | Bidirectional TTL I/O pin that also serves as analog input channel 3 and the comparator 1 output (C1OUT). |
| 3 | RA4/T0CKI/C2OUT | bidirectional | Bidirectional Schmitt-trigger I/O pin that also serves as the clock input to the TMR0 timer/counter (T0CKI) and the comparator 2 output (C2OUT). |
| 4 | RA5/MCLR/VPP | input | Input-only pin that is the active-low Master Clear (Reset) input to the device, or the programming voltage input (VPP) when MCLR is not selected. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | RB0/INT/CCP1 | bidirectional | Bidirectional I/O pin with Schmitt-trigger external interrupt input (INT); CCP1 capture input, compare output or PWM output when selected by the CCPMX configuration bit. |
| 7 | RB1/SDI/SDA | bidirectional | Bidirectional I/O pin that serves as the SPI data input (SDI) or the I2C data line (SDA). |
| 8 | RB2/SDO/RX/DT | bidirectional | Bidirectional I/O pin that serves as the SPI data output (SDO), AUSART asynchronous receive (RX) or AUSART synchronous data (DT). |
| 9 | RB3/PGM/CCP1 | bidirectional | Bidirectional I/O pin that serves as the low-voltage ICSP programming enable (PGM) when LVP is set, or as the CCP1 pin when selected by the CCPMX configuration bit. |
| 10 | RB4/SCK/SCL | bidirectional | Bidirectional I/O pin with interrupt-on-change that serves as the SPI serial clock (SCK) or the I2C serial clock input (SCL). |
| 11 | RB5/SS/TX/CK | bidirectional | Bidirectional I/O pin with interrupt-on-change that serves as the SPI slave select input (SS) in slave mode, AUSART asynchronous transmit (TX) or AUSART synchronous clock (CK). |
| 12 | RB6/PGC/T1OSO/T1CKI | bidirectional | Bidirectional I/O pin with interrupt-on-change that serves as the in-circuit debugger and ICSP programming clock (PGC), the Timer1 oscillator output (T1OSO) or the Timer1 external clock input (T1CKI). |
| 13 | RB7/PGD/T1OSI | bidirectional | Bidirectional I/O pin with interrupt-on-change that serves as the in-circuit debugger and ICSP programming data pin (PGD) or the Timer1 oscillator input (T1OSI). |
| 14 | VDD | power_in | Positive supply for logic and I/O pins. |
| 15 | RA6/OSC2/CLKO | bidirectional | Bidirectional I/O pin that serves as the oscillator crystal output (OSC2) in crystal mode, or outputs CLKO at 1/4 the OSC1 frequency in RC mode. |
| 16 | RA7/OSC1/CLKI | bidirectional | Bidirectional I/O pin that serves as the oscillator crystal input (OSC1) or the external clock source input (CLKI). |
| 17 | RA0/AN0 | bidirectional | Bidirectional TTL I/O pin that also serves as analog input channel 0. |
| 18 | RA1/AN1 | bidirectional | Bidirectional TTL I/O pin that also serves as analog input channel 1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-18-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 18 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 161 | |||
| Storage temperature | -65 | 150 | °C | 161 | |||
| Voltage on any pin with respect to VSS (except VDD and MCLR) | -0.3 | V | 161 | ||||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 7.5 | V | 161 | ||
| Voltage on MCLR with respect to VSS | -0.3 | 14 | V | Note 2 | 161 | ||
| Total power dissipation | Pdis | 1 | W | Note 1 | 161 | ||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 161 | ||
| Output clamp current | IOK | 20 | mA | VO < 0 or VO > VDD | 161 | ||
| Operating temperature | TA | -40 | 85 | °C | Industrial (-I) | 163 | |
| Supply voltage (PIC16F87/88) | VDD | 4 | 5.5 | V | 163 | ||
| RAM data retention voltage | VDR | 1.5 | V | 163 | |||
| VDD start voltage to ensure internal Power-on Reset signal | VPOR | 0.7 | V | See Section 15.4 Power-on Reset (POR) | 163 | ||
| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | See Section 15.4 Power-on Reset (POR) | 163 | ||
| Brown-out Reset voltage (PIC16F87/88) | VBOR | 3.65 | 4.35 | V | FMAX = 14 MHz (Note 2) | 163 | |
| Power-down current (Sleep), -40°C | IPD | 0.6 | 1 | µA | VDD = 5.0V, -40°C | 164 | |
| Power-down current (Sleep), +25°C | IPD | 0.6 | 1 | µA | VDD = 5.0V, +25°C | 164 | |
| Power-down current (Sleep), +85°C | IPD | 1.2 | 5 | µA | VDD = 5.0V, +85°C | 164 | |
| Supply current, Timer1 LP 32 kHz, -40°C | IDD | 32 | 40 | µA | FOSC = 32 kHz (LP oscillator), VDD = 5.0V, -40°C | 165 | |
| Supply current, Timer1 LP 32 kHz, +25°C | IDD | 26 | 35 | µA | FOSC = 32 kHz (LP oscillator), VDD = 5.0V, +25°C | 165 | |
| Supply current, Timer1 LP 32 kHz, +85°C | IDD | 26 | 35 | µA | FOSC = 32 kHz (LP oscillator), VDD = 5.0V, +85°C | 165 | |
| Supply current, RC 4 MHz, -40°C | IDD | 900 | 1060 | µA | FOSC = 4 MHz (RC oscillator), VDD = 5.0V, -40°C | 166 | |
| Supply current, RC 4 MHz, +25°C | IDD | 890 | 1050 | µA | FOSC = 4 MHz (RC oscillator), VDD = 5.0V, +25°C | 166 | |
| Supply current, RC 4 MHz, +85°C | IDD | 890 | 1050 | µA | FOSC = 4 MHz (RC oscillator), VDD = 5.0V, +85°C | 166 | |
| Supply current, HS 20 MHz, -40°C | IDD | 3 | 4.2 | mA | FOSC = 20 MHz (HS oscillator), VDD = 5.0V, -40°C | 167 | |
| Supply current, HS 20 MHz, +25°C | IDD | 2.5 | 4 | mA | FOSC = 20 MHz (HS oscillator), VDD = 5.0V, +25°C | 167 | |
| Supply current, HS 20 MHz, +85°C | IDD | 2.5 | 4 | mA | FOSC = 20 MHz (HS oscillator), VDD = 5.0V, +85°C | 167 | |
| Supply current, RC_RUN 8 MHz, -40°C | IDD | 1.8 | 3 | mA | FOSC = 8 MHz (RC_RUN mode, internal RC oscillator), VDD = 5.0V, -40°C | 170 | |
| Supply current, RC_RUN 8 MHz, +25°C | IDD | 1.7 | 2.8 | mA | FOSC = 8 MHz (RC_RUN mode, internal RC oscillator), VDD = 5.0V, +25°C | 170 | |
| Supply current, RC_RUN 8 MHz, +85°C | IDD | 1.7 | 2.8 | mA | FOSC = 8 MHz (RC_RUN mode, internal RC oscillator), VDD = 5.0V, +85°C | 170 | |
| INTOSC accuracy at +25°C | -2 | 1 | 2 | % | Freq = 8, 4, 2, 1, 0.5, 0.25, 0.125 MHz; 25°C | 172 | |
| INTOSC accuracy, -10°C to +85°C | -5 | 5 | % | -10°C to +85°C, VDD = 4.5-5.5V | 172 | ||
| INTOSC accuracy, -40°C to +85°C | -10 | 10 | % | -40°C to +85°C | 172 | ||
| INTRC frequency accuracy (31 kHz) | 26.562 | 35.938 | kHz | -40°C to +85°C, VDD = 4.5-5.5V | 172 | ||
| Input offset voltage | VIOFF | -10 | 5 | 10 | mV | 3.0V < VDD < 5.5V, -40°C < TA < +85°C | 175 |
| Comparator response time (PIC16F87/88) | TRESP | 150 | 400 | ns | One input at (VDD - 1.5)/2, other transitions VSS to VDD (Note 1) | 175 | |
| Common mode rejection ratio | CMRR | 55 | dB | 3.0V < VDD < 5.5V, -40°C < TA < +85°C | 175 | ||
| Input low voltage, I/O ports with TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 173 | ||
| Input low voltage, I/O ports with Schmitt Trigger buffer | VIL | 0.2 | xVDD | 173 | |||
| Input low voltage, OSC1 in XT and LP mode | VIL | 0.3 | V | XT and LP mode | 173 | ||
| Input high voltage, I/O ports with TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 173 | ||
| Input high voltage, I/O ports with Schmitt Trigger buffer | VIH | 0.8 | xVDD | 173 | |||
| Input high voltage, OSC1 in XT and LP mode | VIH | 1.6 | V | XT and LP mode | 173 | ||
| Input high voltage, MCLR | VIH | 0.8 | xVDD | 173 | |||
| Input leakage current, I/O ports | IIL | -1 | 1 | µA | VSS ≤ VPIN ≤ VDD, pin at high-impedance | 173 | |
| Input leakage current, MCLR | IIL | -5 | 5 | µA | VSS ≤ VPIN ≤ VDD | 173 | |
| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 173 |
| Output low voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +125°C | 174 | ||
| Capacitive loading, OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 174 | ||
| Capacitive loading, all I/O pins and OSC2 | CIO | 50 | pF | All I/O pins and OSC2 (in RC mode) | 174 | ||
| Data EEPROM erase/write cycle time | TDEW | 4 | 8 | ms | 174 | ||
| Program Flash erase cycle time | TPE | 2 | 4 | ms | 174 | ||
| Program Flash write cycle time | TPW | 2 | 4 | ms | 174 |
CAD (KiCad official)
- Symbol:
PIC16F87-I - Footprint:
Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm - 3D model: SOIC-18-300mil (KiCad packages3D, STEP)
- 3D model files:
pic16f87-i-etched.step/pic16f87-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f87-i.step/pic16f87-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (230 pp, sha256
5ef02698f1fd6361, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16F87-I/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F87-I/P
- PIC16F87-I/SS
# PIC16F87-I/SO
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-18-300mil
PIC16F87-I from Microchip Tech, in a SOIC-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA2/AN2/CVREF | bidirectional | Bidirectional TTL I/O pin that also serves as analog input channel 2 and the comparator VREF output (CVREF). |
| 2 | RA3/AN3/C1OUT | bidirectional | Bidirectional TTL I/O pin that also serves as analog input channel 3 and the comparator 1 output (C1OUT). |
| 3 | RA4/T0CKI/C2OUT | bidirectional | Bidirectional Schmitt-trigger I/O pin that also serves as the clock input to the TMR0 timer/counter (T0CKI) and the comparator 2 output (C2OUT). |
| 4 | RA5/MCLR/VPP | input | Input-only pin that is the active-low Master Clear (Reset) input to the device, or the programming voltage input (VPP) when MCLR is not selected. |
| 5 | VSS | power_in | Ground reference for logic and I/O pins. |
| 6 | RB0/INT/CCP1 | bidirectional | Bidirectional I/O pin with Schmitt-trigger external interrupt input (INT); CCP1 capture input, compare output or PWM output when selected by the CCPMX configuration bit. |
| 7 | RB1/SDI/SDA | bidirectional | Bidirectional I/O pin that serves as the SPI data input (SDI) or the I2C data line (SDA). |
| 8 | RB2/SDO/RX/DT | bidirectional | Bidirectional I/O pin that serves as the SPI data output (SDO), AUSART asynchronous receive (RX) or AUSART synchronous data (DT). |
| 9 | RB3/PGM/CCP1 | bidirectional | Bidirectional I/O pin that serves as the low-voltage ICSP programming enable (PGM) when LVP is set, or as the CCP1 pin when selected by the CCPMX configuration bit. |
| 10 | RB4/SCK/SCL | bidirectional | Bidirectional I/O pin with interrupt-on-change that serves as the SPI serial clock (SCK) or the I2C serial clock input (SCL). |
| 11 | RB5/SS/TX/CK | bidirectional | Bidirectional I/O pin with interrupt-on-change that serves as the SPI slave select input (SS) in slave mode, AUSART asynchronous transmit (TX) or AUSART synchronous clock (CK). |
| 12 | RB6/PGC/T1OSO/T1CKI | bidirectional | Bidirectional I/O pin with interrupt-on-change that serves as the in-circuit debugger and ICSP programming clock (PGC), the Timer1 oscillator output (T1OSO) or the Timer1 external clock input (T1CKI). |
| 13 | RB7/PGD/T1OSI | bidirectional | Bidirectional I/O pin with interrupt-on-change that serves as the in-circuit debugger and ICSP programming data pin (PGD) or the Timer1 oscillator input (T1OSI). |
| 14 | VDD | power_in | Positive supply for logic and I/O pins. |
| 15 | RA6/OSC2/CLKO | bidirectional | Bidirectional I/O pin that serves as the oscillator crystal output (OSC2) in crystal mode, or outputs CLKO at 1/4 the OSC1 frequency in RC mode. |
| 16 | RA7/OSC1/CLKI | bidirectional | Bidirectional I/O pin that serves as the oscillator crystal input (OSC1) or the external clock source input (CLKI). |
| 17 | RA0/AN0 | bidirectional | Bidirectional TTL I/O pin that also serves as analog input channel 0. |
| 18 | RA1/AN1 | bidirectional | Bidirectional TTL I/O pin that also serves as analog input channel 1. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-18-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 18 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | | -40 | | 125 | °C | | 161 |
| Storage temperature | | -65 | | 150 | °C | | 161 |
| Voltage on any pin with respect to VSS (except VDD and MCLR) | | -0.3 | | | V | | 161 |
| Voltage on VDD with respect to VSS | VDD | -0.3 | | 7.5 | V | | 161 |
| Voltage on MCLR with respect to VSS | | -0.3 | | 14 | V | Note 2 | 161 |
| Total power dissipation | Pdis | | | 1 | W | Note 1 | 161 |
| Input clamp current | IIK | | | 20 | mA | VI < 0 or VI > VDD | 161 |
| Output clamp current | IOK | | | 20 | mA | VO < 0 or VO > VDD | 161 |
| Operating temperature | TA | -40 | | 85 | °C | Industrial (-I) | 163 |
| Supply voltage (PIC16F87/88) | VDD | 4 | | 5.5 | V | | 163 |
| RAM data retention voltage | VDR | 1.5 | | | V | | 163 |
| VDD start voltage to ensure internal Power-on Reset signal | VPOR | | | 0.7 | V | See Section 15.4 Power-on Reset (POR) | 163 |
| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | | | V/ms | See Section 15.4 Power-on Reset (POR) | 163 |
| Brown-out Reset voltage (PIC16F87/88) | VBOR | 3.65 | | 4.35 | V | FMAX = 14 MHz (Note 2) | 163 |
| Power-down current (Sleep), -40°C | IPD | | 0.6 | 1 | µA | VDD = 5.0V, -40°C | 164 |
| Power-down current (Sleep), +25°C | IPD | | 0.6 | 1 | µA | VDD = 5.0V, +25°C | 164 |
| Power-down current (Sleep), +85°C | IPD | | 1.2 | 5 | µA | VDD = 5.0V, +85°C | 164 |
| Supply current, Timer1 LP 32 kHz, -40°C | IDD | | 32 | 40 | µA | FOSC = 32 kHz (LP oscillator), VDD = 5.0V, -40°C | 165 |
| Supply current, Timer1 LP 32 kHz, +25°C | IDD | | 26 | 35 | µA | FOSC = 32 kHz (LP oscillator), VDD = 5.0V, +25°C | 165 |
| Supply current, Timer1 LP 32 kHz, +85°C | IDD | | 26 | 35 | µA | FOSC = 32 kHz (LP oscillator), VDD = 5.0V, +85°C | 165 |
| Supply current, RC 4 MHz, -40°C | IDD | | 900 | 1060 | µA | FOSC = 4 MHz (RC oscillator), VDD = 5.0V, -40°C | 166 |
| Supply current, RC 4 MHz, +25°C | IDD | | 890 | 1050 | µA | FOSC = 4 MHz (RC oscillator), VDD = 5.0V, +25°C | 166 |
| Supply current, RC 4 MHz, +85°C | IDD | | 890 | 1050 | µA | FOSC = 4 MHz (RC oscillator), VDD = 5.0V, +85°C | 166 |
| Supply current, HS 20 MHz, -40°C | IDD | | 3 | 4.2 | mA | FOSC = 20 MHz (HS oscillator), VDD = 5.0V, -40°C | 167 |
| Supply current, HS 20 MHz, +25°C | IDD | | 2.5 | 4 | mA | FOSC = 20 MHz (HS oscillator), VDD = 5.0V, +25°C | 167 |
| Supply current, HS 20 MHz, +85°C | IDD | | 2.5 | 4 | mA | FOSC = 20 MHz (HS oscillator), VDD = 5.0V, +85°C | 167 |
| Supply current, RC_RUN 8 MHz, -40°C | IDD | | 1.8 | 3 | mA | FOSC = 8 MHz (RC_RUN mode, internal RC oscillator), VDD = 5.0V, -40°C | 170 |
| Supply current, RC_RUN 8 MHz, +25°C | IDD | | 1.7 | 2.8 | mA | FOSC = 8 MHz (RC_RUN mode, internal RC oscillator), VDD = 5.0V, +25°C | 170 |
| Supply current, RC_RUN 8 MHz, +85°C | IDD | | 1.7 | 2.8 | mA | FOSC = 8 MHz (RC_RUN mode, internal RC oscillator), VDD = 5.0V, +85°C | 170 |
| INTOSC accuracy at +25°C | | -2 | 1 | 2 | % | Freq = 8, 4, 2, 1, 0.5, 0.25, 0.125 MHz; 25°C | 172 |
| INTOSC accuracy, -10°C to +85°C | | -5 | | 5 | % | -10°C to +85°C, VDD = 4.5-5.5V | 172 |
| INTOSC accuracy, -40°C to +85°C | | -10 | | 10 | % | -40°C to +85°C | 172 |
| INTRC frequency accuracy (31 kHz) | | 26.562 | | 35.938 | kHz | -40°C to +85°C, VDD = 4.5-5.5V | 172 |
| Input offset voltage | VIOFF | -10 | 5 | 10 | mV | 3.0V < VDD < 5.5V, -40°C < TA < +85°C | 175 |
| Comparator response time (PIC16F87/88) | TRESP | | 150 | 400 | ns | One input at (VDD - 1.5)/2, other transitions VSS to VDD (Note 1) | 175 |
| Common mode rejection ratio | CMRR | 55 | | | dB | 3.0V < VDD < 5.5V, -40°C < TA < +85°C | 175 |
| Input low voltage, I/O ports with TTL buffer | VIL | | | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 173 |
| Input low voltage, I/O ports with Schmitt Trigger buffer | VIL | | | 0.2 | xVDD | | 173 |
| Input low voltage, OSC1 in XT and LP mode | VIL | | | 0.3 | V | XT and LP mode | 173 |
| Input high voltage, I/O ports with TTL buffer | VIH | 2 | | | V | 4.5V ≤ VDD ≤ 5.5V | 173 |
| Input high voltage, I/O ports with Schmitt Trigger buffer | VIH | 0.8 | | | xVDD | | 173 |
| Input high voltage, OSC1 in XT and LP mode | VIH | 1.6 | | | V | XT and LP mode | 173 |
| Input high voltage, MCLR | VIH | 0.8 | | | xVDD | | 173 |
| Input leakage current, I/O ports | IIL | -1 | | 1 | µA | VSS ≤ VPIN ≤ VDD, pin at high-impedance | 173 |
| Input leakage current, MCLR | IIL | -5 | | 5 | µA | VSS ≤ VPIN ≤ VDD | 173 |
| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 173 |
| Output low voltage, I/O ports | VOL | | | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +125°C | 174 |
| Capacitive loading, OSC2 pin | COSC2 | | | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 174 |
| Capacitive loading, all I/O pins and OSC2 | CIO | | | 50 | pF | All I/O pins and OSC2 (in RC mode) | 174 |
| Data EEPROM erase/write cycle time | TDEW | | 4 | 8 | ms | | 174 |
| Program Flash erase cycle time | TPE | | 2 | 4 | ms | | 174 |
| Program Flash write cycle time | TPW | | 2 | 4 | ms | | 174 |
## CAD (KiCad official)
- Symbol: `PIC16F87-I`
- Footprint: `Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm`
- 3D model: SOIC-18-300mil (KiCad packages3D, STEP)
- 3D model files: `pic16f87-i-etched.step` / `pic16f87-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic16f87-i.step` / `pic16f87-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/en/DeviceDoc/30487D.pdf) (230 pp, sha256 `5ef02698f1fd6361`, retrieved 2026-10-29, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic16f87-i-datasheet.pdf)
## Other parts in this family
This page is **PIC16F87-I/SO**. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F87-I/P
- PIC16F87-I/SS