Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16F87-I/SO

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-18-300mil

PIC16F87-I from Microchip Tech, in a SOIC-18-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RA2/AN2/CVREF bidirectional Bidirectional TTL I/O pin that also serves as analog input channel 2 and the comparator VREF output (CVREF).
2 RA3/AN3/C1OUT bidirectional Bidirectional TTL I/O pin that also serves as analog input channel 3 and the comparator 1 output (C1OUT).
3 RA4/T0CKI/C2OUT bidirectional Bidirectional Schmitt-trigger I/O pin that also serves as the clock input to the TMR0 timer/counter (T0CKI) and the comparator 2 output (C2OUT).
4 RA5/MCLR/VPP input Input-only pin that is the active-low Master Clear (Reset) input to the device, or the programming voltage input (VPP) when MCLR is not selected.
5 VSS power_in Ground reference for logic and I/O pins.
6 RB0/INT/CCP1 bidirectional Bidirectional I/O pin with Schmitt-trigger external interrupt input (INT); CCP1 capture input, compare output or PWM output when selected by the CCPMX configuration bit.
7 RB1/SDI/SDA bidirectional Bidirectional I/O pin that serves as the SPI data input (SDI) or the I2C data line (SDA).
8 RB2/SDO/RX/DT bidirectional Bidirectional I/O pin that serves as the SPI data output (SDO), AUSART asynchronous receive (RX) or AUSART synchronous data (DT).
9 RB3/PGM/CCP1 bidirectional Bidirectional I/O pin that serves as the low-voltage ICSP programming enable (PGM) when LVP is set, or as the CCP1 pin when selected by the CCPMX configuration bit.
10 RB4/SCK/SCL bidirectional Bidirectional I/O pin with interrupt-on-change that serves as the SPI serial clock (SCK) or the I2C serial clock input (SCL).
11 RB5/SS/TX/CK bidirectional Bidirectional I/O pin with interrupt-on-change that serves as the SPI slave select input (SS) in slave mode, AUSART asynchronous transmit (TX) or AUSART synchronous clock (CK).
12 RB6/PGC/T1OSO/T1CKI bidirectional Bidirectional I/O pin with interrupt-on-change that serves as the in-circuit debugger and ICSP programming clock (PGC), the Timer1 oscillator output (T1OSO) or the Timer1 external clock input (T1CKI).
13 RB7/PGD/T1OSI bidirectional Bidirectional I/O pin with interrupt-on-change that serves as the in-circuit debugger and ICSP programming data pin (PGD) or the Timer1 oscillator input (T1OSI).
14 VDD power_in Positive supply for logic and I/O pins.
15 RA6/OSC2/CLKO bidirectional Bidirectional I/O pin that serves as the oscillator crystal output (OSC2) in crystal mode, or outputs CLKO at 1/4 the OSC1 frequency in RC mode.
16 RA7/OSC1/CLKI bidirectional Bidirectional I/O pin that serves as the oscillator crystal input (OSC1) or the external clock source input (CLKI).
17 RA0/AN0 bidirectional Bidirectional TTL I/O pin that also serves as analog input channel 0.
18 RA1/AN1 bidirectional Bidirectional TTL I/O pin that also serves as analog input channel 1.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-18-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 18

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 125 °C 161
Storage temperature -65 150 °C 161
Voltage on any pin with respect to VSS (except VDD and MCLR) -0.3 V 161
Voltage on VDD with respect to VSS VDD -0.3 7.5 V 161
Voltage on MCLR with respect to VSS -0.3 14 V Note 2 161
Total power dissipation Pdis 1 W Note 1 161
Input clamp current IIK 20 mA VI < 0 or VI > VDD 161
Output clamp current IOK 20 mA VO < 0 or VO > VDD 161
Operating temperature TA -40 85 °C Industrial (-I) 163
Supply voltage (PIC16F87/88) VDD 4 5.5 V 163
RAM data retention voltage VDR 1.5 V 163
VDD start voltage to ensure internal Power-on Reset signal VPOR 0.7 V See Section 15.4 Power-on Reset (POR) 163
VDD rise rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms See Section 15.4 Power-on Reset (POR) 163
Brown-out Reset voltage (PIC16F87/88) VBOR 3.65 4.35 V FMAX = 14 MHz (Note 2) 163
Power-down current (Sleep), -40°C IPD 0.6 1 µA VDD = 5.0V, -40°C 164
Power-down current (Sleep), +25°C IPD 0.6 1 µA VDD = 5.0V, +25°C 164
Power-down current (Sleep), +85°C IPD 1.2 5 µA VDD = 5.0V, +85°C 164
Supply current, Timer1 LP 32 kHz, -40°C IDD 32 40 µA FOSC = 32 kHz (LP oscillator), VDD = 5.0V, -40°C 165
Supply current, Timer1 LP 32 kHz, +25°C IDD 26 35 µA FOSC = 32 kHz (LP oscillator), VDD = 5.0V, +25°C 165
Supply current, Timer1 LP 32 kHz, +85°C IDD 26 35 µA FOSC = 32 kHz (LP oscillator), VDD = 5.0V, +85°C 165
Supply current, RC 4 MHz, -40°C IDD 900 1060 µA FOSC = 4 MHz (RC oscillator), VDD = 5.0V, -40°C 166
Supply current, RC 4 MHz, +25°C IDD 890 1050 µA FOSC = 4 MHz (RC oscillator), VDD = 5.0V, +25°C 166
Supply current, RC 4 MHz, +85°C IDD 890 1050 µA FOSC = 4 MHz (RC oscillator), VDD = 5.0V, +85°C 166
Supply current, HS 20 MHz, -40°C IDD 3 4.2 mA FOSC = 20 MHz (HS oscillator), VDD = 5.0V, -40°C 167
Supply current, HS 20 MHz, +25°C IDD 2.5 4 mA FOSC = 20 MHz (HS oscillator), VDD = 5.0V, +25°C 167
Supply current, HS 20 MHz, +85°C IDD 2.5 4 mA FOSC = 20 MHz (HS oscillator), VDD = 5.0V, +85°C 167
Supply current, RC_RUN 8 MHz, -40°C IDD 1.8 3 mA FOSC = 8 MHz (RC_RUN mode, internal RC oscillator), VDD = 5.0V, -40°C 170
Supply current, RC_RUN 8 MHz, +25°C IDD 1.7 2.8 mA FOSC = 8 MHz (RC_RUN mode, internal RC oscillator), VDD = 5.0V, +25°C 170
Supply current, RC_RUN 8 MHz, +85°C IDD 1.7 2.8 mA FOSC = 8 MHz (RC_RUN mode, internal RC oscillator), VDD = 5.0V, +85°C 170
INTOSC accuracy at +25°C -2 1 2 % Freq = 8, 4, 2, 1, 0.5, 0.25, 0.125 MHz; 25°C 172
INTOSC accuracy, -10°C to +85°C -5 5 % -10°C to +85°C, VDD = 4.5-5.5V 172
INTOSC accuracy, -40°C to +85°C -10 10 % -40°C to +85°C 172
INTRC frequency accuracy (31 kHz) 26.562 35.938 kHz -40°C to +85°C, VDD = 4.5-5.5V 172
Input offset voltage VIOFF -10 5 10 mV 3.0V < VDD < 5.5V, -40°C < TA < +85°C 175
Comparator response time (PIC16F87/88) TRESP 150 400 ns One input at (VDD - 1.5)/2, other transitions VSS to VDD (Note 1) 175
Common mode rejection ratio CMRR 55 dB 3.0V < VDD < 5.5V, -40°C < TA < +85°C 175
Input low voltage, I/O ports with TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 173
Input low voltage, I/O ports with Schmitt Trigger buffer VIL 0.2 xVDD 173
Input low voltage, OSC1 in XT and LP mode VIL 0.3 V XT and LP mode 173
Input high voltage, I/O ports with TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V 173
Input high voltage, I/O ports with Schmitt Trigger buffer VIH 0.8 xVDD 173
Input high voltage, OSC1 in XT and LP mode VIH 1.6 V XT and LP mode 173
Input high voltage, MCLR VIH 0.8 xVDD 173
Input leakage current, I/O ports IIL -1 1 µA VSS ≤ VPIN ≤ VDD, pin at high-impedance 173
Input leakage current, MCLR IIL -5 5 µA VSS ≤ VPIN ≤ VDD 173
PORTB weak pull-up current IPURB 50 250 400 µA VDD = 5V, VPIN = VSS 173
Output low voltage, I/O ports VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V, -40°C to +125°C 174
Capacitive loading, OSC2 pin COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 174
Capacitive loading, all I/O pins and OSC2 CIO 50 pF All I/O pins and OSC2 (in RC mode) 174
Data EEPROM erase/write cycle time TDEW 4 8 ms 174
Program Flash erase cycle time TPE 2 4 ms 174
Program Flash write cycle time TPW 2 4 ms 174

CAD (KiCad official)

  • Symbol: PIC16F87-I
  • Footprint: Package_SO:SOIC-18W_7.5x11.6mm_P1.27mm
  • 3D model: SOIC-18-300mil (KiCad packages3D, STEP)
  • 3D model files: pic16f87-i-etched.step / pic16f87-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f87-i.step / pic16f87-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (230 pp, sha256 5ef02698f1fd6361, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC16F87-I/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC16F87-I/P
  • PIC16F87-I/SS