main
Ray
pic16f767-i-so: renamed from pic16f767-i, the part it was built from (PIC16F767-I/SO); family listed
a01b3ae
PIC16F767-I/SO
Microchip Tech · MICROCHIP · SOIC-28-300mil
PIC16F767-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP/RE3 | input | Master Clear (active-low Reset) input, or programming voltage input, or digital input-only pin RE3 when MCLRE is cleared. |
| 2 | RA0/AN0 | bidirectional | Digital I/O (TTL buffer) with analog input channel 0. |
| 3 | RA1/AN1 | bidirectional | Digital I/O (TTL buffer) with analog input channel 1. |
| 4 | RA2/AN2/VREF-/CVREF | bidirectional | Digital I/O (TTL buffer) with analog input 2, A/D reference voltage input (low), and comparator voltage reference output. |
| 5 | RA3/AN3/VREF+ | bidirectional | Digital I/O (TTL buffer) with analog input 3 and A/D reference voltage input (high). |
| 6 | RA4/T0CKI/C1OUT | bidirectional | Digital I/O (open-drain when configured as output) with Timer0 external clock input (Schmitt Trigger) and Comparator 1 output. |
| 7 | RA5/AN4/LVDIN/SS/C2OUT | bidirectional | Digital I/O (TTL buffer) with analog input 4, Low-Voltage Detect input, SPI slave select input and Comparator 2 output. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input (ST buffer in RC mode, otherwise CMOS); in INTIO modes this pin functions as digital I/O RA7. |
| 10 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output or CLKO (FOSC/4) in RC mode; in ECIO, RCIO and INTIO2 modes it is digital I/O RA6. |
| 11 | RC0/T1OSO/T1CKI | bidirectional | Digital I/O (Schmitt Trigger) with Timer1 oscillator output and Timer1 external clock input. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | Digital I/O (Schmitt Trigger) with Timer1 oscillator input and CCP2 capture input, compare output or PWM output. |
| 13 | RC2/CCP1 | bidirectional | Digital I/O (Schmitt Trigger) with CCP1 capture input, compare output or PWM output. |
| 14 | RC3/SCK/SCL | bidirectional | Digital I/O (Schmitt Trigger) with MSSP synchronous serial clock input/output for SPI and I2C modes. |
| 15 | RC4/SDI/SDA | bidirectional | Digital I/O (Schmitt Trigger) with MSSP SPI data input and I2C data I/O. |
| 16 | RC5/SDO | bidirectional | Digital I/O (Schmitt Trigger) with MSSP SPI data output. |
| 17 | RC6/TX/CK | bidirectional | Digital I/O (Schmitt Trigger) with AUSART asynchronous transmit and AUSART synchronous clock. |
| 18 | RC7/RX/DT | bidirectional | Digital I/O (Schmitt Trigger) with AUSART asynchronous receive and AUSART synchronous data. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT/AN12 | bidirectional | Digital I/O (TTL/Schmitt Trigger) with external interrupt input and analog input channel 12; PORTB weak pull-up is software selectable. |
| 22 | RB1/AN10 | bidirectional | Digital I/O (TTL buffer) with analog input channel 10; PORTB weak pull-up is software selectable. |
| 23 | RB2/AN8 | bidirectional | Digital I/O (TTL buffer) with analog input channel 8; PORTB weak pull-up is software selectable. |
| 24 | RB3/CCP2/AN9 | bidirectional | Digital I/O (TTL buffer) with CCP2 capture input, compare output or PWM output and analog input channel 9. |
| 25 | RB4/AN11 | bidirectional | Digital I/O (TTL buffer) with analog input channel 11. |
| 26 | RB5/AN13/CCP3 | bidirectional | Digital I/O (TTL buffer) with analog input channel 13 and CCP3 capture input, compare output or PWM output. |
| 27 | RB6/PGC | bidirectional | Digital I/O with In-Circuit Debugger and ICSP programming clock (Schmitt Trigger in serial programming mode). |
| 28 | RB7/PGD | bidirectional | Digital I/O with In-Circuit Debugger and ICSP programming data (Schmitt Trigger in serial programming mode). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Embedded Processors & Controllers |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 4 | 5.5 | V | PIC16F7X7 (non-LF), All configurations | 207 | |
| Brown-out Reset Voltage | VBOR* | 5.5 | V | BOR enabled (Note 6) | 207 | ||
| Brown-out Reset Voltage BORV1:BORV0 = 01 (industrial) | VBOR | 4.16 | 4.5 | V | BORV1:BORV0 = 01, PIC16F7X7 Industrial | 207 | |
| Brown-out Reset Voltage BORV1:BORV0 = 00 (industrial) | VBOR | 4.45 | 4.83 | V | BORV1:BORV0 = 00, PIC16F7X7 Industrial | 207 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | Note 1: limit to which VDD can be lowered without losing RAM data | 207 | ||
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | See section on Power-on Reset | 207 | ||
| Operating temperature | TA | -40 | 85 | °C | Industrial, standard operating conditions | 207 | |
| Power-Down Current (IPD) | IPD | 0.6 | 1 | µA | All devices, VDD = 5.0V, -40°C | 208 | |
| Power-Down Current (IPD) | IPD | 1.2 | 5 | µA | All devices, VDD = 5.0V, +85°C | 208 | |
| Supply Current (IDD) LP oscillator 32 kHz | IDD | 32 | 40 | µA | FOSC = 32 kHz (LP Oscillator), VDD = 5.0V, -40°C | 209 | |
| Supply Current (IDD) LP oscillator 32 kHz | IDD | 26 | 35 | µA | FOSC = 32 kHz (LP Oscillator), VDD = 5.0V, +25°C | 209 | |
| Supply Current (IDD) RC oscillator 1 MHz | IDD | 310 | 380 | µA | FOSC = 1 MHz (RC Oscillator), VDD = 5.0V, -40°C | 209 | |
| Supply Current (IDD) RC oscillator 1 MHz | IDD | 290 | 360 | µA | FOSC = 1 MHz (RC Oscillator), VDD = 5.0V, +25°C | 209 | |
| Supply Current (IDD) RC oscillator 1 MHz | IDD | 280 | 360 | µA | FOSC = 1 MHz (RC Oscillator), VDD = 5.0V, +85°C | 209 | |
| Supply Current (IDD) RC oscillator 4 MHz | IDD | 900 | 1060 | µA | FOSC = 4 MHz (RC Oscillator), VDD = 5.0V, -40°C | 210 | |
| Supply Current (IDD) RC oscillator 4 MHz | IDD | 890 | 1050 | µA | FOSC = 4 MHz (RC Oscillator), VDD = 5.0V, +25°C | 210 | |
| Supply Current (IDD) HS oscillator 20 MHz | IDD | 1.8 | 2.3 | mA | FOSC = 20 MHz (HS Oscillator), VDD = 4.0V, -40°C | 210 | |
| Supply Current (IDD) HS oscillator 20 MHz | IDD | 1.6 | 2.2 | mA | FOSC = 20 MHz (HS Oscillator), VDD = 4.0V, +25°C | 210 | |
| Supply Current (IDD) HS oscillator 20 MHz | IDD | 1.3 | 2.2 | mA | FOSC = 20 MHz (HS Oscillator), VDD = 4.0V, +85°C | 210 | |
| Supply Current (IDD) HS oscillator 20 MHz | IDD | 3 | 4.2 | mA | FOSC = 20 MHz (HS Oscillator), VDD = 5.0V, -40°C | 210 | |
| Supply Current (IDD) HS oscillator 20 MHz | IDD | 2.5 | 4 | mA | FOSC = 20 MHz (HS Oscillator), VDD = 5.0V, +25°C | 210 | |
| Supply Current (IDD) RC_RUN 31.25 kHz | IDD | 32 | 40 | µA | FOSC = 31.25 kHz (RC_RUN mode, Internal RC Oscillator), VDD = 5.0V, -40°C | 211 | |
| Supply Current (IDD) RC_RUN 31.25 kHz | IDD | 29 | 35 | µA | FOSC = 31.25 kHz (RC_RUN mode, Internal RC Oscillator), VDD = 5.0V, +25°C | 211 | |
| Supply Current (IDD) RC_RUN 1 MHz | IDD | 560 | 690 | µA | FOSC = 1 MHz (RC_RUN mode, Internal RC Oscillator), VDD = 5.0V, -40°C | 211 | |
| Supply Current (IDD) RC_RUN 1 MHz | IDD | 500 | 650 | µA | FOSC = 1 MHz (RC_RUN mode, Internal RC Oscillator), VDD = 5.0V, +25°C | 211 | |
| Supply Current (IDD) RC_RUN 4 MHz | IDD | 1.2 | 1.5 | mA | FOSC = 4 MHz (RC_RUN mode, Internal RC Oscillator), VDD = 5.0V, -40°C | 212 | |
| Supply Current (IDD) RC_RUN 8 MHz | IDD | 1.8 | 3 | mA | FOSC = 8 MHz (RC_RUN mode, Internal RC Oscillator), VDD = 5.0V, -40°C | 212 | |
| Supply Current (IDD) RC_RUN 8 MHz | IDD | 1.7 | 2.8 | mA | FOSC = 8 MHz (RC_RUN mode, Internal RC Oscillator), VDD = 5.0V, +25°C | 212 | |
| Supply Current (IDD) SEC_RUN 32 kHz Timer1 | IDD | 20 | 72 | µA | FOSC = 32 kHz (SEC_RUN mode, Timer1 as Clock), VDD = 5.0V, -10°C | 212 | |
| Supply Current (IDD) SEC_RUN 32 kHz Timer1 | IDD | 20 | 65 | µA | FOSC = 32 kHz (SEC_RUN mode, Timer1 as Clock), VDD = 5.0V, +25°C | 212 | |
| Supply Current (IDD) SEC_RUN 32 kHz Timer1 | IDD | 25 | 59 | µA | FOSC = 32 kHz (SEC_RUN mode, Timer1 as Clock), VDD = 5.0V, +70°C | 212 | |
| Input voltage on any pin with respect to VSS (except VDD, MCLR and RA4) | -0.3 | V | Except VDD, MCLR and RA4; upper limit printed as (VDD + 0.3V) | 205 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 6.5 | V | 205 | ||
| Voltage on MCLR with respect to VSS | 0 | 13.5 | V | Note 2 | 205 | ||
| Voltage on RA4 with respect to VSS | 0 | 12 | V | 205 | |||
| Ambient temperature under bias | -40 | 125 | °C | 205 | |||
| Storage temperature | -65 | 150 | °C | 205 | |||
| Total power dissipation | 1 | W | Note 1 | 205 | |||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 205 | ||
| Output clamp current | IOK | 20 | mA | VO < 0 or VO > VDD | 205 |
CAD (KiCad official)
- Symbol:
PIC16F767-I - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic16f767-i-etched.step/pic16f767-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f767-i.step/pic16f767-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (280 pp, sha256
924c77a75d268d68, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16F767-I/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F767-I/SP
# PIC16F767-I/SO
**Microchip Tech** · MICROCHIP · SOIC-28-300mil
PIC16F767-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP/RE3 | input | Master Clear (active-low Reset) input, or programming voltage input, or digital input-only pin RE3 when MCLRE is cleared. |
| 2 | RA0/AN0 | bidirectional | Digital I/O (TTL buffer) with analog input channel 0. |
| 3 | RA1/AN1 | bidirectional | Digital I/O (TTL buffer) with analog input channel 1. |
| 4 | RA2/AN2/VREF-/CVREF | bidirectional | Digital I/O (TTL buffer) with analog input 2, A/D reference voltage input (low), and comparator voltage reference output. |
| 5 | RA3/AN3/VREF+ | bidirectional | Digital I/O (TTL buffer) with analog input 3 and A/D reference voltage input (high). |
| 6 | RA4/T0CKI/C1OUT | bidirectional | Digital I/O (open-drain when configured as output) with Timer0 external clock input (Schmitt Trigger) and Comparator 1 output. |
| 7 | RA5/AN4/LVDIN/SS/C2OUT | bidirectional | Digital I/O (TTL buffer) with analog input 4, Low-Voltage Detect input, SPI slave select input and Comparator 2 output. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI/RA7 | input | Oscillator crystal or external clock input (ST buffer in RC mode, otherwise CMOS); in INTIO modes this pin functions as digital I/O RA7. |
| 10 | OSC2/CLKO/RA6 | bidirectional | Oscillator crystal output or CLKO (FOSC/4) in RC mode; in ECIO, RCIO and INTIO2 modes it is digital I/O RA6. |
| 11 | RC0/T1OSO/T1CKI | bidirectional | Digital I/O (Schmitt Trigger) with Timer1 oscillator output and Timer1 external clock input. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | Digital I/O (Schmitt Trigger) with Timer1 oscillator input and CCP2 capture input, compare output or PWM output. |
| 13 | RC2/CCP1 | bidirectional | Digital I/O (Schmitt Trigger) with CCP1 capture input, compare output or PWM output. |
| 14 | RC3/SCK/SCL | bidirectional | Digital I/O (Schmitt Trigger) with MSSP synchronous serial clock input/output for SPI and I2C modes. |
| 15 | RC4/SDI/SDA | bidirectional | Digital I/O (Schmitt Trigger) with MSSP SPI data input and I2C data I/O. |
| 16 | RC5/SDO | bidirectional | Digital I/O (Schmitt Trigger) with MSSP SPI data output. |
| 17 | RC6/TX/CK | bidirectional | Digital I/O (Schmitt Trigger) with AUSART asynchronous transmit and AUSART synchronous clock. |
| 18 | RC7/RX/DT | bidirectional | Digital I/O (Schmitt Trigger) with AUSART asynchronous receive and AUSART synchronous data. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT/AN12 | bidirectional | Digital I/O (TTL/Schmitt Trigger) with external interrupt input and analog input channel 12; PORTB weak pull-up is software selectable. |
| 22 | RB1/AN10 | bidirectional | Digital I/O (TTL buffer) with analog input channel 10; PORTB weak pull-up is software selectable. |
| 23 | RB2/AN8 | bidirectional | Digital I/O (TTL buffer) with analog input channel 8; PORTB weak pull-up is software selectable. |
| 24 | RB3/CCP2/AN9 | bidirectional | Digital I/O (TTL buffer) with CCP2 capture input, compare output or PWM output and analog input channel 9. |
| 25 | RB4/AN11 | bidirectional | Digital I/O (TTL buffer) with analog input channel 11. |
| 26 | RB5/AN13/CCP3 | bidirectional | Digital I/O (TTL buffer) with analog input channel 13 and CCP3 capture input, compare output or PWM output. |
| 27 | RB6/PGC | bidirectional | Digital I/O with In-Circuit Debugger and ICSP programming clock (Schmitt Trigger in serial programming mode). |
| 28 | RB7/PGD | bidirectional | Digital I/O with In-Circuit Debugger and ICSP programming data (Schmitt Trigger in serial programming mode). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Embedded Processors & Controllers |
| Pins | 28 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 4 | | 5.5 | V | PIC16F7X7 (non-LF), All configurations | 207 |
| Brown-out Reset Voltage | VBOR* | | | 5.5 | V | BOR enabled (Note 6) | 207 |
| Brown-out Reset Voltage BORV1:BORV0 = 01 (industrial) | VBOR | 4.16 | | 4.5 | V | BORV1:BORV0 = 01, PIC16F7X7 Industrial | 207 |
| Brown-out Reset Voltage BORV1:BORV0 = 00 (industrial) | VBOR | 4.45 | | 4.83 | V | BORV1:BORV0 = 00, PIC16F7X7 Industrial | 207 |
| RAM Data Retention Voltage | VDR | | 1.5 | | V | Note 1: limit to which VDD can be lowered without losing RAM data | 207 |
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | | | V/ms | See section on Power-on Reset | 207 |
| Operating temperature | TA | -40 | | 85 | °C | Industrial, standard operating conditions | 207 |
| Power-Down Current (IPD) | IPD | | 0.6 | 1 | µA | All devices, VDD = 5.0V, -40°C | 208 |
| Power-Down Current (IPD) | IPD | | 1.2 | 5 | µA | All devices, VDD = 5.0V, +85°C | 208 |
| Supply Current (IDD) LP oscillator 32 kHz | IDD | | 32 | 40 | µA | FOSC = 32 kHz (LP Oscillator), VDD = 5.0V, -40°C | 209 |
| Supply Current (IDD) LP oscillator 32 kHz | IDD | | 26 | 35 | µA | FOSC = 32 kHz (LP Oscillator), VDD = 5.0V, +25°C | 209 |
| Supply Current (IDD) RC oscillator 1 MHz | IDD | | 310 | 380 | µA | FOSC = 1 MHz (RC Oscillator), VDD = 5.0V, -40°C | 209 |
| Supply Current (IDD) RC oscillator 1 MHz | IDD | | 290 | 360 | µA | FOSC = 1 MHz (RC Oscillator), VDD = 5.0V, +25°C | 209 |
| Supply Current (IDD) RC oscillator 1 MHz | IDD | | 280 | 360 | µA | FOSC = 1 MHz (RC Oscillator), VDD = 5.0V, +85°C | 209 |
| Supply Current (IDD) RC oscillator 4 MHz | IDD | | 900 | 1060 | µA | FOSC = 4 MHz (RC Oscillator), VDD = 5.0V, -40°C | 210 |
| Supply Current (IDD) RC oscillator 4 MHz | IDD | | 890 | 1050 | µA | FOSC = 4 MHz (RC Oscillator), VDD = 5.0V, +25°C | 210 |
| Supply Current (IDD) HS oscillator 20 MHz | IDD | | 1.8 | 2.3 | mA | FOSC = 20 MHz (HS Oscillator), VDD = 4.0V, -40°C | 210 |
| Supply Current (IDD) HS oscillator 20 MHz | IDD | | 1.6 | 2.2 | mA | FOSC = 20 MHz (HS Oscillator), VDD = 4.0V, +25°C | 210 |
| Supply Current (IDD) HS oscillator 20 MHz | IDD | | 1.3 | 2.2 | mA | FOSC = 20 MHz (HS Oscillator), VDD = 4.0V, +85°C | 210 |
| Supply Current (IDD) HS oscillator 20 MHz | IDD | | 3 | 4.2 | mA | FOSC = 20 MHz (HS Oscillator), VDD = 5.0V, -40°C | 210 |
| Supply Current (IDD) HS oscillator 20 MHz | IDD | | 2.5 | 4 | mA | FOSC = 20 MHz (HS Oscillator), VDD = 5.0V, +25°C | 210 |
| Supply Current (IDD) RC_RUN 31.25 kHz | IDD | | 32 | 40 | µA | FOSC = 31.25 kHz (RC_RUN mode, Internal RC Oscillator), VDD = 5.0V, -40°C | 211 |
| Supply Current (IDD) RC_RUN 31.25 kHz | IDD | | 29 | 35 | µA | FOSC = 31.25 kHz (RC_RUN mode, Internal RC Oscillator), VDD = 5.0V, +25°C | 211 |
| Supply Current (IDD) RC_RUN 1 MHz | IDD | | 560 | 690 | µA | FOSC = 1 MHz (RC_RUN mode, Internal RC Oscillator), VDD = 5.0V, -40°C | 211 |
| Supply Current (IDD) RC_RUN 1 MHz | IDD | | 500 | 650 | µA | FOSC = 1 MHz (RC_RUN mode, Internal RC Oscillator), VDD = 5.0V, +25°C | 211 |
| Supply Current (IDD) RC_RUN 4 MHz | IDD | | 1.2 | 1.5 | mA | FOSC = 4 MHz (RC_RUN mode, Internal RC Oscillator), VDD = 5.0V, -40°C | 212 |
| Supply Current (IDD) RC_RUN 8 MHz | IDD | | 1.8 | 3 | mA | FOSC = 8 MHz (RC_RUN mode, Internal RC Oscillator), VDD = 5.0V, -40°C | 212 |
| Supply Current (IDD) RC_RUN 8 MHz | IDD | | 1.7 | 2.8 | mA | FOSC = 8 MHz (RC_RUN mode, Internal RC Oscillator), VDD = 5.0V, +25°C | 212 |
| Supply Current (IDD) SEC_RUN 32 kHz Timer1 | IDD | | 20 | 72 | µA | FOSC = 32 kHz (SEC_RUN mode, Timer1 as Clock), VDD = 5.0V, -10°C | 212 |
| Supply Current (IDD) SEC_RUN 32 kHz Timer1 | IDD | | 20 | 65 | µA | FOSC = 32 kHz (SEC_RUN mode, Timer1 as Clock), VDD = 5.0V, +25°C | 212 |
| Supply Current (IDD) SEC_RUN 32 kHz Timer1 | IDD | | 25 | 59 | µA | FOSC = 32 kHz (SEC_RUN mode, Timer1 as Clock), VDD = 5.0V, +70°C | 212 |
| Input voltage on any pin with respect to VSS (except VDD, MCLR and RA4) | | -0.3 | | | V | Except VDD, MCLR and RA4; upper limit printed as (VDD + 0.3V) | 205 |
| Voltage on VDD with respect to VSS | VDD | -0.3 | | 6.5 | V | | 205 |
| Voltage on MCLR with respect to VSS | | 0 | | 13.5 | V | Note 2 | 205 |
| Voltage on RA4 with respect to VSS | | 0 | | 12 | V | | 205 |
| Ambient temperature under bias | | -40 | | 125 | °C | | 205 |
| Storage temperature | | -65 | | 150 | °C | | 205 |
| Total power dissipation | | | | 1 | W | Note 1 | 205 |
| Input clamp current | IIK | | | 20 | mA | VI < 0 or VI > VDD | 205 |
| Output clamp current | IOK | | | 20 | mA | VO < 0 or VO > VDD | 205 |
## CAD (KiCad official)
- Symbol: `PIC16F767-I`
- Footprint: `Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm`
- 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files: `pic16f767-i-etched.step` / `pic16f767-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic16f767-i.step` / `pic16f767-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](https://ww1.microchip.com/downloads/aemDocuments/documents/MCU08/ProductDocuments/DataSheets/30498D.pdf) (280 pp, sha256 `924c77a75d268d68`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic16f767-i-datasheet.pdf)
## Other parts in this family
This page is **PIC16F767-I/SO**. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F767-I/SP