main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers pic16f767-i: symbol repaired (body fitted to the names) · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
pic16f767-i-etched.glb Publish 0.1.0 · Ray
pic16f767-i-etched.step pic16f767-i: factory component page (tier=mfr) · Ray
pic16f767-i-hero.glb pic16f767-i: hero GLB from the etched model (keeps the MPN mark) · Ray
pic16f767-i-hero.overlay.json Publish 0.1.0 · Ray
pic16f767-i-so-hero.glb Publish 0.1.1 · Ray
pic16f767-i-so-hero.overlay.json Publish 0.1.1 · Ray
pic16f767-i.glb Publish 0.1.0 · Ray
pic16f767-i.kicad_mod Publish 0.1.0 · Ray
pic16f767-i.kicad_sym pic16f767-i: symbol repaired (body fitted to the names) · Ray
pic16f767-i.lbr pic16f767-i-so: renamed from pic16f767-i, the part it was built from (PIC16F767-I/SO); family listed · Ray
pic16f767-i.step Publish 0.1.0 · Ray
README.md pic16f767-i-so: renamed from pic16f767-i, the part it was built from (PIC16F767-I/SO); family listed · Ray

PIC16F767-I/SO

Microchip Tech · MICROCHIP · SOIC-28-300mil

PIC16F767-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR/VPP/RE3 input Master Clear (active-low Reset) input, or programming voltage input, or digital input-only pin RE3 when MCLRE is cleared.
2 RA0/AN0 bidirectional Digital I/O (TTL buffer) with analog input channel 0.
3 RA1/AN1 bidirectional Digital I/O (TTL buffer) with analog input channel 1.
4 RA2/AN2/VREF-/CVREF bidirectional Digital I/O (TTL buffer) with analog input 2, A/D reference voltage input (low), and comparator voltage reference output.
5 RA3/AN3/VREF+ bidirectional Digital I/O (TTL buffer) with analog input 3 and A/D reference voltage input (high).
6 RA4/T0CKI/C1OUT bidirectional Digital I/O (open-drain when configured as output) with Timer0 external clock input (Schmitt Trigger) and Comparator 1 output.
7 RA5/AN4/LVDIN/SS/C2OUT bidirectional Digital I/O (TTL buffer) with analog input 4, Low-Voltage Detect input, SPI slave select input and Comparator 2 output.
8 VSS power_in Ground reference for logic and I/O pins.
9 OSC1/CLKI/RA7 input Oscillator crystal or external clock input (ST buffer in RC mode, otherwise CMOS); in INTIO modes this pin functions as digital I/O RA7.
10 OSC2/CLKO/RA6 bidirectional Oscillator crystal output or CLKO (FOSC/4) in RC mode; in ECIO, RCIO and INTIO2 modes it is digital I/O RA6.
11 RC0/T1OSO/T1CKI bidirectional Digital I/O (Schmitt Trigger) with Timer1 oscillator output and Timer1 external clock input.
12 RC1/T1OSI/CCP2 bidirectional Digital I/O (Schmitt Trigger) with Timer1 oscillator input and CCP2 capture input, compare output or PWM output.
13 RC2/CCP1 bidirectional Digital I/O (Schmitt Trigger) with CCP1 capture input, compare output or PWM output.
14 RC3/SCK/SCL bidirectional Digital I/O (Schmitt Trigger) with MSSP synchronous serial clock input/output for SPI and I2C modes.
15 RC4/SDI/SDA bidirectional Digital I/O (Schmitt Trigger) with MSSP SPI data input and I2C data I/O.
16 RC5/SDO bidirectional Digital I/O (Schmitt Trigger) with MSSP SPI data output.
17 RC6/TX/CK bidirectional Digital I/O (Schmitt Trigger) with AUSART asynchronous transmit and AUSART synchronous clock.
18 RC7/RX/DT bidirectional Digital I/O (Schmitt Trigger) with AUSART asynchronous receive and AUSART synchronous data.
19 VSS power_in Ground reference for logic and I/O pins.
20 VDD power_in Positive supply for logic and I/O pins.
21 RB0/INT/AN12 bidirectional Digital I/O (TTL/Schmitt Trigger) with external interrupt input and analog input channel 12; PORTB weak pull-up is software selectable.
22 RB1/AN10 bidirectional Digital I/O (TTL buffer) with analog input channel 10; PORTB weak pull-up is software selectable.
23 RB2/AN8 bidirectional Digital I/O (TTL buffer) with analog input channel 8; PORTB weak pull-up is software selectable.
24 RB3/CCP2/AN9 bidirectional Digital I/O (TTL buffer) with CCP2 capture input, compare output or PWM output and analog input channel 9.
25 RB4/AN11 bidirectional Digital I/O (TTL buffer) with analog input channel 11.
26 RB5/AN13/CCP3 bidirectional Digital I/O (TTL buffer) with analog input channel 13 and CCP3 capture input, compare output or PWM output.
27 RB6/PGC bidirectional Digital I/O with In-Circuit Debugger and ICSP programming clock (Schmitt Trigger in serial programming mode).
28 RB7/PGD bidirectional Digital I/O with In-Circuit Debugger and ICSP programming data (Schmitt Trigger in serial programming mode).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-28-300mil
Category Embedded Processors & Controllers
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 4 5.5 V PIC16F7X7 (non-LF), All configurations 207
Brown-out Reset Voltage VBOR* 5.5 V BOR enabled (Note 6) 207
Brown-out Reset Voltage BORV1:BORV0 = 01 (industrial) VBOR 4.16 4.5 V BORV1:BORV0 = 01, PIC16F7X7 Industrial 207
Brown-out Reset Voltage BORV1:BORV0 = 00 (industrial) VBOR 4.45 4.83 V BORV1:BORV0 = 00, PIC16F7X7 Industrial 207
RAM Data Retention Voltage VDR 1.5 V Note 1: limit to which VDD can be lowered without losing RAM data 207
VDD Rise Rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms See section on Power-on Reset 207
Operating temperature TA -40 85 °C Industrial, standard operating conditions 207
Power-Down Current (IPD) IPD 0.6 1 µA All devices, VDD = 5.0V, -40°C 208
Power-Down Current (IPD) IPD 1.2 5 µA All devices, VDD = 5.0V, +85°C 208
Supply Current (IDD) LP oscillator 32 kHz IDD 32 40 µA FOSC = 32 kHz (LP Oscillator), VDD = 5.0V, -40°C 209
Supply Current (IDD) LP oscillator 32 kHz IDD 26 35 µA FOSC = 32 kHz (LP Oscillator), VDD = 5.0V, +25°C 209
Supply Current (IDD) RC oscillator 1 MHz IDD 310 380 µA FOSC = 1 MHz (RC Oscillator), VDD = 5.0V, -40°C 209
Supply Current (IDD) RC oscillator 1 MHz IDD 290 360 µA FOSC = 1 MHz (RC Oscillator), VDD = 5.0V, +25°C 209
Supply Current (IDD) RC oscillator 1 MHz IDD 280 360 µA FOSC = 1 MHz (RC Oscillator), VDD = 5.0V, +85°C 209
Supply Current (IDD) RC oscillator 4 MHz IDD 900 1060 µA FOSC = 4 MHz (RC Oscillator), VDD = 5.0V, -40°C 210
Supply Current (IDD) RC oscillator 4 MHz IDD 890 1050 µA FOSC = 4 MHz (RC Oscillator), VDD = 5.0V, +25°C 210
Supply Current (IDD) HS oscillator 20 MHz IDD 1.8 2.3 mA FOSC = 20 MHz (HS Oscillator), VDD = 4.0V, -40°C 210
Supply Current (IDD) HS oscillator 20 MHz IDD 1.6 2.2 mA FOSC = 20 MHz (HS Oscillator), VDD = 4.0V, +25°C 210
Supply Current (IDD) HS oscillator 20 MHz IDD 1.3 2.2 mA FOSC = 20 MHz (HS Oscillator), VDD = 4.0V, +85°C 210
Supply Current (IDD) HS oscillator 20 MHz IDD 3 4.2 mA FOSC = 20 MHz (HS Oscillator), VDD = 5.0V, -40°C 210
Supply Current (IDD) HS oscillator 20 MHz IDD 2.5 4 mA FOSC = 20 MHz (HS Oscillator), VDD = 5.0V, +25°C 210
Supply Current (IDD) RC_RUN 31.25 kHz IDD 32 40 µA FOSC = 31.25 kHz (RC_RUN mode, Internal RC Oscillator), VDD = 5.0V, -40°C 211
Supply Current (IDD) RC_RUN 31.25 kHz IDD 29 35 µA FOSC = 31.25 kHz (RC_RUN mode, Internal RC Oscillator), VDD = 5.0V, +25°C 211
Supply Current (IDD) RC_RUN 1 MHz IDD 560 690 µA FOSC = 1 MHz (RC_RUN mode, Internal RC Oscillator), VDD = 5.0V, -40°C 211
Supply Current (IDD) RC_RUN 1 MHz IDD 500 650 µA FOSC = 1 MHz (RC_RUN mode, Internal RC Oscillator), VDD = 5.0V, +25°C 211
Supply Current (IDD) RC_RUN 4 MHz IDD 1.2 1.5 mA FOSC = 4 MHz (RC_RUN mode, Internal RC Oscillator), VDD = 5.0V, -40°C 212
Supply Current (IDD) RC_RUN 8 MHz IDD 1.8 3 mA FOSC = 8 MHz (RC_RUN mode, Internal RC Oscillator), VDD = 5.0V, -40°C 212
Supply Current (IDD) RC_RUN 8 MHz IDD 1.7 2.8 mA FOSC = 8 MHz (RC_RUN mode, Internal RC Oscillator), VDD = 5.0V, +25°C 212
Supply Current (IDD) SEC_RUN 32 kHz Timer1 IDD 20 72 µA FOSC = 32 kHz (SEC_RUN mode, Timer1 as Clock), VDD = 5.0V, -10°C 212
Supply Current (IDD) SEC_RUN 32 kHz Timer1 IDD 20 65 µA FOSC = 32 kHz (SEC_RUN mode, Timer1 as Clock), VDD = 5.0V, +25°C 212
Supply Current (IDD) SEC_RUN 32 kHz Timer1 IDD 25 59 µA FOSC = 32 kHz (SEC_RUN mode, Timer1 as Clock), VDD = 5.0V, +70°C 212
Input voltage on any pin with respect to VSS (except VDD, MCLR and RA4) -0.3 V Except VDD, MCLR and RA4; upper limit printed as (VDD + 0.3V) 205
Voltage on VDD with respect to VSS VDD -0.3 6.5 V 205
Voltage on MCLR with respect to VSS 0 13.5 V Note 2 205
Voltage on RA4 with respect to VSS 0 12 V 205
Ambient temperature under bias -40 125 °C 205
Storage temperature -65 150 °C 205
Total power dissipation 1 W Note 1 205
Input clamp current IIK 20 mA VI < 0 or VI > VDD 205
Output clamp current IOK 20 mA VO < 0 or VO > VDD 205

CAD (KiCad official)

  • Symbol: PIC16F767-I
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: pic16f767-i-etched.step / pic16f767-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f767-i.step / pic16f767-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (280 pp, sha256 924c77a75d268d68, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC16F767-I/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC16F767-I/SP