main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers pic16f73-i: symbol repaired (body fitted to the names) · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
pic16f73-i-etched.glb Publish 0.1.0 · Ray
pic16f73-i-etched.step pic16f73-i: factory component page (tier=lcsc) · Ray
pic16f73-i-hero.glb pic16f73-i: hero GLB from the etched model (keeps the MPN mark) · Ray
pic16f73-i-hero.overlay.json Publish 0.1.0 · Ray
pic16f73-i-so-hero.glb Publish 0.1.1 · Ray
pic16f73-i-so-hero.overlay.json Publish 0.1.1 · Ray
pic16f73-i.glb Publish 0.1.0 · Ray
pic16f73-i.kicad_mod Publish 0.1.0 · Ray
pic16f73-i.kicad_sym pic16f73-i: symbol repaired (body fitted to the names) · Ray
pic16f73-i.lbr pic16f73-i-so: renamed from pic16f73-i, the part it was built from (PIC16F73-I/SO); family listed · Ray
pic16f73-i.step Publish 0.1.0 · Ray
README.md pic16f73-i-so: renamed from pic16f73-i, the part it was built from (PIC16F73-I/SO); family listed · Ray

PIC16F73-I/SO

Microchip Tech · MICROCHIP · SOIC-28-300mil

PIC16F73-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR/VPP input Master Clear (Reset) input, an active low RESET to the device; also the programming voltage input VPP.
2 RA0/AN0 bidirectional Digital I/O with analog input 0.
3 RA1/AN1 bidirectional Digital I/O with analog input 1.
4 RA2/AN2 bidirectional Digital I/O with analog input 2.
5 RA3/AN3/VREF bidirectional Digital I/O with analog input 3; also the A/D reference voltage input VREF.
6 RA4/T0CKI bidirectional Digital I/O, open drain when configured as output; Timer0 external clock input.
7 RA5/SS/AN4 bidirectional Digital I/O with SPI slave select input and analog input 4.
8 VSS power_in Ground reference for logic and I/O pins.
9 OSC1/CLKI input Oscillator crystal input or external clock source input.
10 OSC2/CLKO output Oscillator crystal output; in RC mode it outputs CLKO at 1/4 the frequency of OSC1.
11 RC0/T1OSO/T1CKI bidirectional Digital I/O with Timer1 oscillator output and Timer1 external clock input.
12 RC1/T1OSI/CCP2 bidirectional Digital I/O with Timer1 oscillator input and Capture2 input, Compare2 output, PWM2 output.
13 RC2/CCP1 bidirectional Digital I/O with Capture1 input, Compare1 output or PWM1 output.
14 RC3/SCK/SCL bidirectional Digital I/O with synchronous serial clock input/output for SPI mode and I2C mode.
15 RC4/SDI/SDA bidirectional Digital I/O with SPI data in and I2C data I/O.
16 RC5/SDO bidirectional Digital I/O with SPI data out.
17 RC6/TX/CK bidirectional Digital I/O with USART asynchronous transmit and USART synchronous clock.
18 RC7/RX/DT bidirectional Digital I/O with USART asynchronous receive and USART synchronous data.
19 VSS power_in Ground reference for logic and I/O pins.
20 VDD power_in Positive supply for logic and I/O pins.
21 RB0/INT bidirectional Digital I/O with external interrupt input (Schmitt Trigger buffer when configured as interrupt).
22 RB1 bidirectional Digital I/O; PORTB can be software programmed for internal weak pull-up on all inputs.
23 RB2 bidirectional Digital I/O; PORTB can be software programmed for internal weak pull-up on all inputs.
24 RB3/PGM bidirectional Digital I/O and low voltage ICSP programming enable pin.
25 RB4 bidirectional Digital I/O; PORTB can be software programmed for internal weak pull-up on all inputs.
26 RB5 bidirectional Digital I/O; PORTB can be software programmed for internal weak pull-up on all inputs.
27 RB6/PGC bidirectional Digital I/O and In-Circuit Debugger and ICSP programming clock.
28 RB7/PGD bidirectional Digital I/O and In-Circuit Debugger and ICSP programming data.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-28-300mil
Category Embedded Processors & Controllers
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 4 5.5 V All configurations 123
Supply Voltage with BOR enabled VDD 5.5 V BOR enabled (Note 7) 123
Operating Temperature TA -40 85 °C Industrial 123
VDD Rise Rate SVDD 0.05 V/ms See section on Power-on Reset for details 123
Brown-out Reset Voltage VBOR 3.65 4 4.35 V BODEN bit in configuration word enabled 123
Supply Current XT/RC IDD 0.9 4 mA XT, RC osc configuration FOSC = 4 MHz, VDD = 5.5V (Note 4) 124
Supply Current HS IDD 5.2 15 mA HS osc configuration FOSC = 20 MHz, VDD = 5.5V 124
Brown-out Reset Current ΔIBOR 25 200 µA BOR enabled, VDD = 5.0V 124
Power-down Current WDT enabled IPD 5 10.5 µA VDD = 4.0V, WDT enabled, -40°C to +85°C 124
Power-down Current WDT disabled IPD 0.1 1.5 µA VDD = 4.0V, WDT disabled, -40°C to +85°C 124
Power-down Current WDT enabled IPD 42 57 µA VDD = 4.0V, WDT enabled, -40°C to +125°C 124
Power-down Current WDT disabled IPD 19 42 µA VDD = 4.0V, WDT disabled, -40°C to +125°C 124
Input Low Voltage TTL VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 125
Input High Voltage TTL VIH 2 V 4.5V ≤ VDD ≤ 5.5V 125
Input High Voltage OSC1 XT/LP VIH 1.6 V OSC1 (in XT and LP mode) 125
PORTB Weak Pull-up Current IPURB 50 250 400 µA VDD = 5V, VPIN = VSS 125
Input Leakage I/O ports IIL -1 1 µA Vss ≤ VPIN ≤ VDD, pin at hi-impedance 125
Input Leakage MCLR, RA4/T0CKI IIL -5 5 µA Vss ≤ VPIN ≤ VDD 125
Input Leakage OSC1 IIL -5 5 µA Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration 125
Output Low Voltage I/O ports VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V, -40°C to +125°C 126
Output Low Voltage OSC2 RC VOL 0.6 V IOL = 1.6 mA, VDD = 4.5V, -40°C to +125°C 126
Open Drain High Voltage RA4 VOD 12 V RA4 pin 126
OSC2 Capacitive Loading COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 126
I/O and OSC2 Capacitive Loading CIO 50 pF All I/O pins and OSC2 (in RC mode) 126
SCL SDA Capacitive Loading CB 400 pF SCL, SDA in I2C mode 126
Program FLASH Endurance EP 100 1000 E/W 25°C at 5V 126
VDD for Read VPR 2 5.5 V 126
Oscillator Frequency RC FOSC 4 MHz RC osc mode 128
Oscillator Frequency XT FOSC 0.1 4 MHz XT osc mode 128
Oscillator Frequency HS FOSC 4 20 MHz HS osc mode 128
Instruction Cycle Time TCY 200 ns TCY = 4/FOSC 128
External Clock High or Low Time XT TosL,TosH 500 ns XT oscillator 128
External Clock High or Low Time HS TosL,TosH 15 ns HS oscillator 128
External Clock Rise or Fall Time XT TosR,TosF 25 ns XT oscillator 128
External Clock Rise or Fall Time HS TosR,TosF 15 ns HS oscillator 128
OSC1 to CLKOUT Falling TosH2ckL 75 200 ns (Note 1) 129
OSC1 (Q1) to Port Out Valid TosH2ioV 100 255 ns 129
Reference Voltage VREF 2.5 5.5 V -40°C to +125°C 140
Reference Voltage VREF 2.2 5.5 V 0°C to +125°C 140
Recommended Analog Source Impedance ZAIN 10 kΩ 140
A/D Conversion Current PIC16F7X IAD 180 µA Average current consumption when A/D is on (Note 1) 140
A/D Clock Period TAD 1.6 µs TOSC based, VREF ≥ 3.0V 141
A/D Acquisition Time TACQ 5 µs Minimum time is the amplifier settling time 141
Ambient Temperature Under Bias TA -55 125 °C Under bias 121
Storage Temperature TSTG -65 150 °C 121
Voltage on VDD with respect to VSS VDD -0.3 6.5 V 121
Voltage on MCLR with respect to VSS VMCLR 0 13.5 V Note 2 121
Voltage on RA4 with respect to VSS VRA4 0 12 V 121
Total Power Dissipation Pdis 1 W Note 1 121
Input Clamp Current IIK -20 20 mA VI < 0 or VI > VDD 121
Output Clamp Current IOK -20 20 mA VO < 0 or VO > VDD 121

CAD (KiCad official)

  • Symbol: PIC16F73-I
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: pic16f73-i-etched.step / pic16f73-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f73-i.step / pic16f73-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (174 pp, sha256 81a107b5141fded6, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC16F73-I/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC16F73-I/SP
  • PIC16F73-I/SS