3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC16F73-I/SO
Microchip Tech · MICROCHIP · SOIC-28-300mil
PIC16F73-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP | input | Master Clear (Reset) input, an active low RESET to the device; also the programming voltage input VPP. |
| 2 | RA0/AN0 | bidirectional | Digital I/O with analog input 0. |
| 3 | RA1/AN1 | bidirectional | Digital I/O with analog input 1. |
| 4 | RA2/AN2 | bidirectional | Digital I/O with analog input 2. |
| 5 | RA3/AN3/VREF | bidirectional | Digital I/O with analog input 3; also the A/D reference voltage input VREF. |
| 6 | RA4/T0CKI | bidirectional | Digital I/O, open drain when configured as output; Timer0 external clock input. |
| 7 | RA5/SS/AN4 | bidirectional | Digital I/O with SPI slave select input and analog input 4. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKI | input | Oscillator crystal input or external clock source input. |
| 10 | OSC2/CLKO | output | Oscillator crystal output; in RC mode it outputs CLKO at 1/4 the frequency of OSC1. |
| 11 | RC0/T1OSO/T1CKI | bidirectional | Digital I/O with Timer1 oscillator output and Timer1 external clock input. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | Digital I/O with Timer1 oscillator input and Capture2 input, Compare2 output, PWM2 output. |
| 13 | RC2/CCP1 | bidirectional | Digital I/O with Capture1 input, Compare1 output or PWM1 output. |
| 14 | RC3/SCK/SCL | bidirectional | Digital I/O with synchronous serial clock input/output for SPI mode and I2C mode. |
| 15 | RC4/SDI/SDA | bidirectional | Digital I/O with SPI data in and I2C data I/O. |
| 16 | RC5/SDO | bidirectional | Digital I/O with SPI data out. |
| 17 | RC6/TX/CK | bidirectional | Digital I/O with USART asynchronous transmit and USART synchronous clock. |
| 18 | RC7/RX/DT | bidirectional | Digital I/O with USART asynchronous receive and USART synchronous data. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT | bidirectional | Digital I/O with external interrupt input (Schmitt Trigger buffer when configured as interrupt). |
| 22 | RB1 | bidirectional | Digital I/O; PORTB can be software programmed for internal weak pull-up on all inputs. |
| 23 | RB2 | bidirectional | Digital I/O; PORTB can be software programmed for internal weak pull-up on all inputs. |
| 24 | RB3/PGM | bidirectional | Digital I/O and low voltage ICSP programming enable pin. |
| 25 | RB4 | bidirectional | Digital I/O; PORTB can be software programmed for internal weak pull-up on all inputs. |
| 26 | RB5 | bidirectional | Digital I/O; PORTB can be software programmed for internal weak pull-up on all inputs. |
| 27 | RB6/PGC | bidirectional | Digital I/O and In-Circuit Debugger and ICSP programming clock. |
| 28 | RB7/PGD | bidirectional | Digital I/O and In-Circuit Debugger and ICSP programming data. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Embedded Processors & Controllers |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 4 | 5.5 | V | All configurations | 123 | |
| Supply Voltage with BOR enabled | VDD | 5.5 | V | BOR enabled (Note 7) | 123 | ||
| Operating Temperature | TA | -40 | 85 | °C | Industrial | 123 | |
| VDD Rise Rate | SVDD | 0.05 | V/ms | See section on Power-on Reset for details | 123 | ||
| Brown-out Reset Voltage | VBOR | 3.65 | 4 | 4.35 | V | BODEN bit in configuration word enabled | 123 |
| Supply Current XT/RC | IDD | 0.9 | 4 | mA | XT, RC osc configuration FOSC = 4 MHz, VDD = 5.5V (Note 4) | 124 | |
| Supply Current HS | IDD | 5.2 | 15 | mA | HS osc configuration FOSC = 20 MHz, VDD = 5.5V | 124 | |
| Brown-out Reset Current | ΔIBOR | 25 | 200 | µA | BOR enabled, VDD = 5.0V | 124 | |
| Power-down Current WDT enabled | IPD | 5 | 10.5 | µA | VDD = 4.0V, WDT enabled, -40°C to +85°C | 124 | |
| Power-down Current WDT disabled | IPD | 0.1 | 1.5 | µA | VDD = 4.0V, WDT disabled, -40°C to +85°C | 124 | |
| Power-down Current WDT enabled | IPD | 42 | 57 | µA | VDD = 4.0V, WDT enabled, -40°C to +125°C | 124 | |
| Power-down Current WDT disabled | IPD | 19 | 42 | µA | VDD = 4.0V, WDT disabled, -40°C to +125°C | 124 | |
| Input Low Voltage TTL | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 125 | ||
| Input High Voltage TTL | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 125 | ||
| Input High Voltage OSC1 XT/LP | VIH | 1.6 | V | OSC1 (in XT and LP mode) | 125 | ||
| PORTB Weak Pull-up Current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 125 |
| Input Leakage I/O ports | IIL | -1 | 1 | µA | Vss ≤ VPIN ≤ VDD, pin at hi-impedance | 125 | |
| Input Leakage MCLR, RA4/T0CKI | IIL | -5 | 5 | µA | Vss ≤ VPIN ≤ VDD | 125 | |
| Input Leakage OSC1 | IIL | -5 | 5 | µA | Vss ≤ VPIN ≤ VDD, XT, HS and LP osc configuration | 125 | |
| Output Low Voltage I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +125°C | 126 | ||
| Output Low Voltage OSC2 RC | VOL | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40°C to +125°C | 126 | ||
| Open Drain High Voltage RA4 | VOD | 12 | V | RA4 pin | 126 | ||
| OSC2 Capacitive Loading | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 126 | ||
| I/O and OSC2 Capacitive Loading | CIO | 50 | pF | All I/O pins and OSC2 (in RC mode) | 126 | ||
| SCL SDA Capacitive Loading | CB | 400 | pF | SCL, SDA in I2C mode | 126 | ||
| Program FLASH Endurance | EP | 100 | 1000 | E/W | 25°C at 5V | 126 | |
| VDD for Read | VPR | 2 | 5.5 | V | 126 | ||
| Oscillator Frequency RC | FOSC | 4 | MHz | RC osc mode | 128 | ||
| Oscillator Frequency XT | FOSC | 0.1 | 4 | MHz | XT osc mode | 128 | |
| Oscillator Frequency HS | FOSC | 4 | 20 | MHz | HS osc mode | 128 | |
| Instruction Cycle Time | TCY | 200 | ns | TCY = 4/FOSC | 128 | ||
| External Clock High or Low Time XT | TosL,TosH | 500 | ns | XT oscillator | 128 | ||
| External Clock High or Low Time HS | TosL,TosH | 15 | ns | HS oscillator | 128 | ||
| External Clock Rise or Fall Time XT | TosR,TosF | 25 | ns | XT oscillator | 128 | ||
| External Clock Rise or Fall Time HS | TosR,TosF | 15 | ns | HS oscillator | 128 | ||
| OSC1 to CLKOUT Falling | TosH2ckL | 75 | 200 | ns | (Note 1) | 129 | |
| OSC1 (Q1) to Port Out Valid | TosH2ioV | 100 | 255 | ns | 129 | ||
| Reference Voltage | VREF | 2.5 | 5.5 | V | -40°C to +125°C | 140 | |
| Reference Voltage | VREF | 2.2 | 5.5 | V | 0°C to +125°C | 140 | |
| Recommended Analog Source Impedance | ZAIN | 10 | kΩ | 140 | |||
| A/D Conversion Current PIC16F7X | IAD | 180 | µA | Average current consumption when A/D is on (Note 1) | 140 | ||
| A/D Clock Period | TAD | 1.6 | µs | TOSC based, VREF ≥ 3.0V | 141 | ||
| A/D Acquisition Time | TACQ | 5 | µs | Minimum time is the amplifier settling time | 141 | ||
| Ambient Temperature Under Bias | TA | -55 | 125 | °C | Under bias | 121 | |
| Storage Temperature | TSTG | -65 | 150 | °C | 121 | ||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 6.5 | V | 121 | ||
| Voltage on MCLR with respect to VSS | VMCLR | 0 | 13.5 | V | Note 2 | 121 | |
| Voltage on RA4 with respect to VSS | VRA4 | 0 | 12 | V | 121 | ||
| Total Power Dissipation | Pdis | 1 | W | Note 1 | 121 | ||
| Input Clamp Current | IIK | -20 | 20 | mA | VI < 0 or VI > VDD | 121 | |
| Output Clamp Current | IOK | -20 | 20 | mA | VO < 0 or VO > VDD | 121 |
CAD (KiCad official)
- Symbol:
PIC16F73-I - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic16f73-i-etched.step/pic16f73-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f73-i.step/pic16f73-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (174 pp, sha256
81a107b5141fded6, retrieved 2026-10-27, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16F73-I/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F73-I/SP
- PIC16F73-I/SS