main
History Download
Ray Publish 0.1.0 b535744

PIC16F726-E

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil

PIC16F726-E from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RE3/MCLR/VPP input Input-only RE3 general purpose input, Master Clear reset input with internal weak pull-up when MCLRE=1, or high-voltage programming input VPP.
2 RA0/AN0/SS/VCAP bidirectional General purpose I/O, A/D channel 0 input, SSP Slave Select input (selectable on RA0 or RA5), or LDO filter capacitor pin VCAP (PIC16F72X only, 0.1 to 1.0 µF ceramic recommended).
3 RA1/AN1 bidirectional General purpose I/O or A/D channel 1 input.
4 RA2/AN2 bidirectional General purpose I/O or A/D channel 2 input.
5 RA3/AN3/VREF bidirectional General purpose I/O, A/D channel 3 input, or A/D voltage reference input.
6 RA4/CPS6/T0CKI bidirectional General purpose I/O, capacitive sensing input 6, or Timer0 clock input.
7 RA5/AN4/CPS7/SS/VCAP bidirectional General purpose I/O, A/D channel 4 input, capacitive sensing input 7, SSP Slave Select input (selectable on RA5 or RA0), or LDO filter capacitor pin VCAP (PIC16F72X only).
8 VSS power_in Ground reference.
9 RA7/OSC1/CLKIN bidirectional General purpose I/O, crystal/resonator connection OSC1 (LP, XT, HS modes), or external clock input CLKIN (EC mode) or RC oscillator connection.
10 RA6/OSC2/CLKOUT/VCAP bidirectional General purpose I/O, crystal/resonator connection OSC2, FOSC/4 clock output CLKOUT, or LDO filter capacitor pin VCAP (PIC16F72X only).
11 RC0/T1OSO/T1CKI bidirectional General purpose I/O, Timer1 oscillator output connection, or Timer1 clock input.
12 RC1/T1OSI/CCP2 bidirectional General purpose I/O, Timer1 oscillator input connection, or Capture/Compare/PWM2 (CCP2 selectable on RC1 or RB3).
13 RC2/CCP1 bidirectional General purpose I/O or Capture/Compare/PWM1.
14 RC3/SCK/SCL bidirectional General purpose I/O, SPI clock, or I2C clock.
15 RC4/SDI/SDA bidirectional General purpose I/O, SPI data input, or I2C data input/output.
16 RC5/SDO bidirectional General purpose I/O or SPI data output.
17 RC6/TX/CK bidirectional General purpose I/O, USART asynchronous transmit, or USART synchronous clock.
18 RC7/RX/DT bidirectional General purpose I/O, USART asynchronous receive input, or USART synchronous data.
19 VSS power_in Ground reference.
20 VDD power_in Positive supply (1.8V-5.5V operation for PIC16F726).
21 RB0/AN12/CPS0/INT bidirectional General purpose I/O with interrupt-on-change and weak pull-up, A/D channel 12 input, capacitive sensing input 0, or external interrupt.
22 RB1/AN10/CPS1 bidirectional General purpose I/O with interrupt-on-change and weak pull-up, A/D channel 10 input, or capacitive sensing input 1.
23 RB2/AN8/CPS2 bidirectional General purpose I/O with interrupt-on-change and weak pull-up, A/D channel 8 input, or capacitive sensing input 2.
24 RB3/AN9/CPS3/CCP2 bidirectional General purpose I/O with interrupt-on-change and weak pull-up, A/D channel 9 input, capacitive sensing input 3, or Capture/Compare/PWM2 (selectable on RB3 or RC1).
25 RB4/AN11/CPS4 bidirectional General purpose I/O with interrupt-on-change and weak pull-up, A/D channel 11 input, or capacitive sensing input 4.
26 RB5/AN13/CPS5/T1G bidirectional General purpose I/O with interrupt-on-change and weak pull-up, A/D channel 13 input, capacitive sensing input 5, or Timer1 gate input.
27 RB6/ICSPCLK bidirectional General purpose I/O with interrupt-on-change and weak pull-up, or in-circuit serial programming clock (also in-circuit debug clock).
28 RB7/ICSPDAT bidirectional General purpose I/O with interrupt-on-change and weak pull-up, or in-circuit serial programming data (also in-circuit debug data).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-28-208mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 125 °C 200
Storage temperature -65 150 °C 200
Voltage on VDD with respect to VSS, PIC16F72X VDD -0.3 6.5 V 200
Voltage on VCAP pin with respect to VSS, PIC16F72X VCAP -0.3 4 V 200
Voltage on MCLR with respect to VSS MCLR -0.3 9 V 200
Voltage on all other pins with respect to VSS -0.3 V max is (VDD + 0.3V) 200
Maximum current out of VSS pin 95 mA 200
Maximum current into VDD pin 70 mA 200
Clamp current IK 20 mA VPIN < 0 or VPIN > VDD 200
Maximum output current sunk by any I/O pin 25 mA 200
Maximum output current sourced by any I/O pin 25 mA 200
Maximum current sourced by all ports 65 mA -40°C TA +125°C for extended 200
Operating temperature TA -40 125 °C Extended, -40°C TA +125°C 201
VDD Supply Voltage PIC16F722/3/4/6/7 VDD 1.8 5.5 V FOSC <= 16 MHz: HFINTOSC, EC 201
VDD Supply Voltage PIC16F722/3/4/6/7 VDD 2.3 5.5 V FOSC <= 20 MHz, EC 201
VDD Supply Voltage PIC16F722/3/4/6/7 VDD 2.5 5.5 V FOSC <= 20 MHz, HS 201
RAM Data Retention Voltage PIC16F722/3/4/6/7 VDR 1.7 V Device in Sleep mode 201
VDD Rise Rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms VDD rise rate to ensure internal Power-on Reset signal 201
Fixed Voltage Reference Voltage, Initial Accuracy VFVR -8 6 % VFVR = 1.024V, VDD >= 2.5V 201
Power-down Base Current (IPD) WDT, BOR, FVR, T1OSC disabled, 1.8V IPD 4.3 17 µA WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive; max at +125°C 205
Power-down Base Current (IPD) WDT, BOR, FVR, T1OSC disabled, 3.0V IPD 5 18 µA WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive; max at +125°C 205
Power-down Base Current (IPD) WDT, BOR, FVR, T1OSC disabled, 5.0V IPD 5.5 21 µA WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive; max at +125°C 205
Supply Current (IDD) LP Oscillator mode, 1.8V IDD 11 21 µA FOSC = 32 kHz, LP Oscillator mode (Note 4), -40°C TA +125°C 203
Supply Current (IDD) LP Oscillator mode, 3.0V IDD 14 25 µA FOSC = 32 kHz, LP Oscillator mode (Note 4), -40°C TA +125°C 203
Supply Current (IDD) LP Oscillator mode, 5.0V IDD 15 27 µA FOSC = 32 kHz, LP Oscillator mode (Note 4), -40°C TA +125°C 203
Input Low Voltage TTL buffer VIL 0.8 V 4.5V <= VDD <= 5.5V 207
Input Low Voltage VIL 0.15 VDD 1.8V <= VDD <= 4.5V 207
Input Low Voltage Schmitt Trigger buffer VIL 0.2 VDD 2.0V <= VDD <= 5.5V 207
Input Low Voltage MCLR, OSC1 (RC mode) VIL 0.2 VDD 207
Input Low Voltage OSC1 (HS mode) VIL 0.3 VDD 207
Input High Voltage TTL buffer VIH 2 V 4.5V <= VDD <= 5.5V 207
Input High Voltage Schmitt Trigger buffer VIH 0.8 VDD 2.0V <= VDD <= 5.5V 207
Input High Voltage MCLR VIH 0.8 VDD 207
Input High Voltage OSC1 (HS mode) VIH 0.7 VDD 207
Output Low Voltage I/O ports VOL 0.6 V IOL = 8mA, VDD = 5V 207
PORTB Weak Pull-up Current IPUR 25 100 200 µA VDD = 3.3V, VPIN = VSS 207
PORTB Weak Pull-up Current IPUR 25 140 300 µA VDD = 5.0V, VPIN = VSS 207
Input Leakage Current I/O ports IIL -125 125 nA VSS <= VPIN <= VDD, Pin at high-impedance, 125°C 207
Capacitive Loading OSC2 pin COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 207
Capacitive Loading All I/O pins CIO 50 pF 207
Characteristic Retention TRETD 40 Year Provided no other specifications are violated 208
External CLKIN Frequency HS Oscillator mode FOSC 20 MHz HS Oscillator mode 213
Instruction Cycle Time TCY 200 ns TCY = 4/FOSC 213
Internal Calibrated HFINTOSC Frequency tolerance HFOSC -2 2 % 0°C TA +85°C, VDD V 214
Internal Calibrated HFINTOSC Frequency tolerance HFOSC -5 5 % -40°C TA +125°C 214
Brown-out Reset Voltage BORV=2.5V VBOR 2.38 2.5 2.73 V BORV=2.5V 217
Brown-out Reset Voltage BORV=1.9V VBOR 1.8 1.9 2.11 V BORV=1.9V 217
Power-up Timer Period PWRTE = 0 TPWRT 40 65 140 ms PWRTE = 0 217
Low Power Watchdog Timer Time-out Period (No Prescaler) TWDTLP 10 18 27 ms VDD = 3.3V-5V 217
Brown-out Reset Hysteresis VHYST 0 25 50 mV -40°C to +85°C 217
Maximum Junction Temperature TJMAX 150 °C 209
Thermal Resistance Junction to Ambient, 28-pin SSOP package JA 90 C/W 28-pin SSOP package 209
Thermal Resistance Junction to Case, 28-pin SSOP package JC 24 C/W 28-pin SSOP package 209

CAD (KiCad official)

  • Symbol: PIC16F726-E
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: pic16f726-e-etched.step / pic16f726-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f726-e.step / pic16f726-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (282 pp, sha256 00bf4f739ca402f9, retrieved 2026-11-09, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF