Generated by kicad-footprint-generator · KiCad file format 20260206
PIC16F726-E
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC16F726-E from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/MCLR/VPP | input | Input-only RE3 general purpose input, Master Clear reset input with internal weak pull-up when MCLRE=1, or high-voltage programming input VPP. |
| 2 | RA0/AN0/SS/VCAP | bidirectional | General purpose I/O, A/D channel 0 input, SSP Slave Select input (selectable on RA0 or RA5), or LDO filter capacitor pin VCAP (PIC16F72X only, 0.1 to 1.0 µF ceramic recommended). |
| 3 | RA1/AN1 | bidirectional | General purpose I/O or A/D channel 1 input. |
| 4 | RA2/AN2 | bidirectional | General purpose I/O or A/D channel 2 input. |
| 5 | RA3/AN3/VREF | bidirectional | General purpose I/O, A/D channel 3 input, or A/D voltage reference input. |
| 6 | RA4/CPS6/T0CKI | bidirectional | General purpose I/O, capacitive sensing input 6, or Timer0 clock input. |
| 7 | RA5/AN4/CPS7/SS/VCAP | bidirectional | General purpose I/O, A/D channel 4 input, capacitive sensing input 7, SSP Slave Select input (selectable on RA5 or RA0), or LDO filter capacitor pin VCAP (PIC16F72X only). |
| 8 | VSS | power_in | Ground reference. |
| 9 | RA7/OSC1/CLKIN | bidirectional | General purpose I/O, crystal/resonator connection OSC1 (LP, XT, HS modes), or external clock input CLKIN (EC mode) or RC oscillator connection. |
| 10 | RA6/OSC2/CLKOUT/VCAP | bidirectional | General purpose I/O, crystal/resonator connection OSC2, FOSC/4 clock output CLKOUT, or LDO filter capacitor pin VCAP (PIC16F72X only). |
| 11 | RC0/T1OSO/T1CKI | bidirectional | General purpose I/O, Timer1 oscillator output connection, or Timer1 clock input. |
| 12 | RC1/T1OSI/CCP2 | bidirectional | General purpose I/O, Timer1 oscillator input connection, or Capture/Compare/PWM2 (CCP2 selectable on RC1 or RB3). |
| 13 | RC2/CCP1 | bidirectional | General purpose I/O or Capture/Compare/PWM1. |
| 14 | RC3/SCK/SCL | bidirectional | General purpose I/O, SPI clock, or I2C clock. |
| 15 | RC4/SDI/SDA | bidirectional | General purpose I/O, SPI data input, or I2C data input/output. |
| 16 | RC5/SDO | bidirectional | General purpose I/O or SPI data output. |
| 17 | RC6/TX/CK | bidirectional | General purpose I/O, USART asynchronous transmit, or USART synchronous clock. |
| 18 | RC7/RX/DT | bidirectional | General purpose I/O, USART asynchronous receive input, or USART synchronous data. |
| 19 | VSS | power_in | Ground reference. |
| 20 | VDD | power_in | Positive supply (1.8V-5.5V operation for PIC16F726). |
| 21 | RB0/AN12/CPS0/INT | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, A/D channel 12 input, capacitive sensing input 0, or external interrupt. |
| 22 | RB1/AN10/CPS1 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, A/D channel 10 input, or capacitive sensing input 1. |
| 23 | RB2/AN8/CPS2 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, A/D channel 8 input, or capacitive sensing input 2. |
| 24 | RB3/AN9/CPS3/CCP2 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, A/D channel 9 input, capacitive sensing input 3, or Capture/Compare/PWM2 (selectable on RB3 or RC1). |
| 25 | RB4/AN11/CPS4 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, A/D channel 11 input, or capacitive sensing input 4. |
| 26 | RB5/AN13/CPS5/T1G | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, A/D channel 13 input, capacitive sensing input 5, or Timer1 gate input. |
| 27 | RB6/ICSPCLK | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, or in-circuit serial programming clock (also in-circuit debug clock). |
| 28 | RB7/ICSPDAT | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, or in-circuit serial programming data (also in-circuit debug data). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 200 | |||
| Storage temperature | -65 | 150 | °C | 200 | |||
| Voltage on VDD with respect to VSS, PIC16F72X | VDD | -0.3 | 6.5 | V | 200 | ||
| Voltage on VCAP pin with respect to VSS, PIC16F72X | VCAP | -0.3 | 4 | V | 200 | ||
| Voltage on MCLR with respect to VSS | MCLR | -0.3 | 9 | V | 200 | ||
| Voltage on all other pins with respect to VSS | -0.3 | V | max is (VDD + 0.3V) | 200 | |||
| Maximum current out of VSS pin | 95 | mA | 200 | ||||
| Maximum current into VDD pin | 70 | mA | 200 | ||||
| Clamp current | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 200 | ||
| Maximum output current sunk by any I/O pin | 25 | mA | 200 | ||||
| Maximum output current sourced by any I/O pin | 25 | mA | 200 | ||||
| Maximum current sourced by all ports | 65 | mA | -40°C TA +125°C for extended | 200 | |||
| Operating temperature | TA | -40 | 125 | °C | Extended, -40°C TA +125°C | 201 | |
| VDD Supply Voltage PIC16F722/3/4/6/7 | VDD | 1.8 | 5.5 | V | FOSC <= 16 MHz: HFINTOSC, EC | 201 | |
| VDD Supply Voltage PIC16F722/3/4/6/7 | VDD | 2.3 | 5.5 | V | FOSC <= 20 MHz, EC | 201 | |
| VDD Supply Voltage PIC16F722/3/4/6/7 | VDD | 2.5 | 5.5 | V | FOSC <= 20 MHz, HS | 201 | |
| RAM Data Retention Voltage PIC16F722/3/4/6/7 | VDR | 1.7 | V | Device in Sleep mode | 201 | ||
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | VDD rise rate to ensure internal Power-on Reset signal | 201 | ||
| Fixed Voltage Reference Voltage, Initial Accuracy | VFVR | -8 | 6 | % | VFVR = 1.024V, VDD >= 2.5V | 201 | |
| Power-down Base Current (IPD) WDT, BOR, FVR, T1OSC disabled, 1.8V | IPD | 4.3 | 17 | µA | WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive; max at +125°C | 205 | |
| Power-down Base Current (IPD) WDT, BOR, FVR, T1OSC disabled, 3.0V | IPD | 5 | 18 | µA | WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive; max at +125°C | 205 | |
| Power-down Base Current (IPD) WDT, BOR, FVR, T1OSC disabled, 5.0V | IPD | 5.5 | 21 | µA | WDT, BOR, FVR, and T1OSC disabled, all Peripherals Inactive; max at +125°C | 205 | |
| Supply Current (IDD) LP Oscillator mode, 1.8V | IDD | 11 | 21 | µA | FOSC = 32 kHz, LP Oscillator mode (Note 4), -40°C TA +125°C | 203 | |
| Supply Current (IDD) LP Oscillator mode, 3.0V | IDD | 14 | 25 | µA | FOSC = 32 kHz, LP Oscillator mode (Note 4), -40°C TA +125°C | 203 | |
| Supply Current (IDD) LP Oscillator mode, 5.0V | IDD | 15 | 27 | µA | FOSC = 32 kHz, LP Oscillator mode (Note 4), -40°C TA +125°C | 203 | |
| Input Low Voltage TTL buffer | VIL | 0.8 | V | 4.5V <= VDD <= 5.5V | 207 | ||
| Input Low Voltage | VIL | 0.15 | VDD | 1.8V <= VDD <= 4.5V | 207 | ||
| Input Low Voltage Schmitt Trigger buffer | VIL | 0.2 | VDD | 2.0V <= VDD <= 5.5V | 207 | ||
| Input Low Voltage MCLR, OSC1 (RC mode) | VIL | 0.2 | VDD | 207 | |||
| Input Low Voltage OSC1 (HS mode) | VIL | 0.3 | VDD | 207 | |||
| Input High Voltage TTL buffer | VIH | 2 | V | 4.5V <= VDD <= 5.5V | 207 | ||
| Input High Voltage Schmitt Trigger buffer | VIH | 0.8 | VDD | 2.0V <= VDD <= 5.5V | 207 | ||
| Input High Voltage MCLR | VIH | 0.8 | VDD | 207 | |||
| Input High Voltage OSC1 (HS mode) | VIH | 0.7 | VDD | 207 | |||
| Output Low Voltage I/O ports | VOL | 0.6 | V | IOL = 8mA, VDD = 5V | 207 | ||
| PORTB Weak Pull-up Current | IPUR | 25 | 100 | 200 | µA | VDD = 3.3V, VPIN = VSS | 207 |
| PORTB Weak Pull-up Current | IPUR | 25 | 140 | 300 | µA | VDD = 5.0V, VPIN = VSS | 207 |
| Input Leakage Current I/O ports | IIL | -125 | 125 | nA | VSS <= VPIN <= VDD, Pin at high-impedance, 125°C | 207 | |
| Capacitive Loading OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 207 | ||
| Capacitive Loading All I/O pins | CIO | 50 | pF | 207 | |||
| Characteristic Retention | TRETD | 40 | Year | Provided no other specifications are violated | 208 | ||
| External CLKIN Frequency HS Oscillator mode | FOSC | 20 | MHz | HS Oscillator mode | 213 | ||
| Instruction Cycle Time | TCY | 200 | ns | TCY = 4/FOSC | 213 | ||
| Internal Calibrated HFINTOSC Frequency tolerance | HFOSC | -2 | 2 | % | 0°C TA +85°C, VDD V | 214 | |
| Internal Calibrated HFINTOSC Frequency tolerance | HFOSC | -5 | 5 | % | -40°C TA +125°C | 214 | |
| Brown-out Reset Voltage BORV=2.5V | VBOR | 2.38 | 2.5 | 2.73 | V | BORV=2.5V | 217 |
| Brown-out Reset Voltage BORV=1.9V | VBOR | 1.8 | 1.9 | 2.11 | V | BORV=1.9V | 217 |
| Power-up Timer Period PWRTE = 0 | TPWRT | 40 | 65 | 140 | ms | PWRTE = 0 | 217 |
| Low Power Watchdog Timer Time-out Period (No Prescaler) | TWDTLP | 10 | 18 | 27 | ms | VDD = 3.3V-5V | 217 |
| Brown-out Reset Hysteresis | VHYST | 0 | 25 | 50 | mV | -40°C to +85°C | 217 |
| Maximum Junction Temperature | TJMAX | 150 | °C | 209 | |||
| Thermal Resistance Junction to Ambient, 28-pin SSOP package | JA | 90 | C/W | 28-pin SSOP package | 209 | ||
| Thermal Resistance Junction to Case, 28-pin SSOP package | JC | 24 | C/W | 28-pin SSOP package | 209 |
CAD (KiCad official)
- Symbol:
PIC16F726-E - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic16f726-e-etched.step/pic16f726-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f726-e.step/pic16f726-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (282 pp, sha256
00bf4f739ca402f9, retrieved 2026-11-09, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).