Generated by kicad-footprint-generator · KiCad file format 20260206
PIC16F1933T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28
PIC16F1933T-I from Microchip Tech, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/MCLR/VPP | input | General purpose input RE3, Master Clear (active-low reset) with internal weak pull-up, or high-voltage programming voltage VPP. |
| 2 | RA0/AN0/C12IN0-/C2OUT/SRNQ/SS/VCAP/SEG12 | bidirectional | General purpose I/O with A/D channel AN0, comparator negative input C12IN0-, C2OUT, SRNQ, SS (via APFCON), VCAP regulator filter (PIC16F1933 only) and LCD SEG12. |
| 3 | RA1/AN1/C12IN1-/SEG7 | bidirectional | General purpose I/O with A/D channel AN1, comparator negative input C12IN1- and LCD SEG7. |
| 4 | RA2/AN2/C2IN+/VREF-/DACOUT/COM2 | bidirectional | General purpose I/O with A/D channel AN2, comparator positive input C2IN+, A/D negative reference VREF-, DAC output DACOUT and LCD COM2. |
| 5 | RA3/AN3/C1IN+/VREF+/COM3/SEG15 | bidirectional | General purpose I/O with A/D channel AN3, comparator positive input C1IN+, A/D positive reference VREF+, LCD COM3 and SEG15. |
| 6 | RA4/C1OUT/CPS6/T0CKI/SRQ/CCP5/SEG4 | bidirectional | General purpose I/O with comparator output C1OUT, capacitive sensing input CPS6, Timer0 clock input T0CKI, SR latch output SRQ, CCP5 and LCD SEG4. |
| 7 | RA5/AN4/C2OUT/CPS7/SRNQ/SS/VCAP/SEG5 | bidirectional | General purpose I/O with A/D channel AN4, C2OUT, capacitive sensing input CPS7, SRNQ, SS, VCAP regulator filter (PIC16F1933 only) and LCD SEG5. |
| 8 | VSS | power_in | Ground reference. |
| 9 | RA7/OSC1/CLKIN/SEG2 | bidirectional | General purpose I/O, crystal/resonator OSC1 (LP, XT, HS modes), external clock input CLKIN (EC mode) and LCD SEG2. |
| 10 | RA6/OSC2/CLKOUT/VCAP/SEG1 | bidirectional | General purpose I/O, crystal/resonator OSC2, FOSC/4 output CLKOUT, VCAP regulator filter (PIC16F1933 only) and LCD SEG1. |
| 11 | RC0/T1OSO/T1CKI/P2B | bidirectional | General purpose I/O with Timer1 oscillator connection T1OSO, Timer1 clock input T1CKI and PWM output P2B. |
| 12 | RC1/T1OSI/CCP2/P2A | bidirectional | General purpose I/O with Timer1 oscillator connection T1OSI and Capture/Compare/PWM CCP2/P2A. |
| 13 | RC2/CCP1/P1A/SEG3 | bidirectional | General purpose I/O with Capture/Compare/PWM CCP1/P1A and LCD SEG3. |
| 14 | RC3/SCK/SCL/SEG6 | bidirectional | General purpose I/O with SPI clock SCK, I2C clock SCL and LCD SEG6. |
| 15 | RC4/SDI/SDA/T1G/SEG11 | bidirectional | General purpose I/O with SPI data input SDI, I2C data SDA, Timer1 gate input T1G and LCD SEG11. |
| 16 | RC5/SDO/SEG10 | bidirectional | General purpose I/O with SPI data output SDO and LCD SEG10. |
| 17 | RC6/TX/CK/CCP3/P3A/SEG9 | bidirectional | General purpose I/O with EUSART asynchronous transmit TX, synchronous clock CK, CCP3/P3A and LCD SEG9. |
| 18 | RC7/RX/DT/P3B/SEG8 | bidirectional | General purpose I/O with EUSART asynchronous receive RX, synchronous data DT, PWM output P3B and LCD SEG8. |
| 19 | VSS | power_in | Ground reference. |
| 20 | VDD | power_in | Positive supply; 1.8V-5.5V (PIC16F1933), 1.8V-3.6V (PIC16LF1933). |
| 21 | RB0/AN12/CPS0/CCP4/SRI/INT/SEG0 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, A/D channel AN12, capacitive sensing CPS0, CCP4, SR latch input SRI, external interrupt INT and LCD SEG0. |
| 22 | RB1/AN10/C12IN3-/CPS1/P1C/VLCD1 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, A/D channel AN10, comparator input C12IN3-, capacitive sensing CPS1, PWM output P1C and LCD analog input VLCD1. |
| 23 | RB2/AN8/CPS2/P1B/VLCD2 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, A/D channel AN8, capacitive sensing CPS2, PWM output P1B and LCD analog input VLCD2. |
| 24 | RB3/AN9/C12IN2-/CPS3/CCP2/P2A/VLCD3 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, A/D channel AN9, comparator input C12IN2-, capacitive sensing CPS3, CCP2/P2A and LCD analog input VLCD3. |
| 25 | RB4/AN11/CPS4/P1D/COM0 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, A/D channel AN11, capacitive sensing CPS4, PWM output P1D and LCD COM0. |
| 26 | RB5/AN13/CPS5/P2B/CCP3/P3A/T1G/COM1 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, A/D channel AN13, capacitive sensing CPS5, P2B, CCP3/P3A, Timer1 gate T1G and LCD COM1. |
| 27 | RB6/ICSPCLK/ICDCLK/SEG14 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, serial programming clock ICSPCLK, in-circuit debug clock ICDCLK and LCD SEG14. |
| 28 | RB7/ICSPDAT/ICDDAT/SEG13 | bidirectional | General purpose I/O with interrupt-on-change and weak pull-up, ICSP data I/O ICSPDAT, in-circuit debug data ICDDAT and LCD SEG13. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 1.8 | 5.5 | V | PIC16F1933, FOSC ≤ 16 MHz | 368 | |
| Supply Voltage | VDD | 2.5 | 5.5 | V | PIC16F1933, FOSC ≤ 32 MHz (Note 2) | 368 | |
| RAM Data Retention Voltage | VDR | 1.7 | V | PIC16F1933, Device in Sleep mode | 368 | ||
| Fixed Voltage Reference Voltage for ADC | VADFVR | -8 | 6 | % | 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V | 368 | |
| Fixed Voltage Reference Voltage for Comparator and DAC | VCDAFVR | -11 | 7 | % | 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V | 368 | |
| Fixed Voltage Reference Voltage for LCD Bias | VLCDFVR | -11 | 10 | % | 3.072V, VDD ≥ 3.6V | 368 | |
| VDD Rise Rate to ensure internal Power-on Reset | SVDD | 0.05 | V/ms | 368 | |||
| Power-on Reset Release Voltage | VPOR | 1.6 | V | 368 | |||
| Power-on Reset Rearm Voltage | VPORR | 1.42 | V | PIC16F1933 | 368 | ||
| Supply Current, LP mode | IDD | 23 | 63 | µA | VDD=1.8V, FOSC=32 kHz LP, -40°C to +85°C, 0.1µF on VCAP | 370 | |
| Supply Current, XT 4 MHz | IDD | 700 | 850 | µA | VDD=5.0V, FOSC=4 MHz XT, 0.1µF on VCAP | 370 | |
| Supply Current, EC 32 MHz | IDD | 3.9 | 4.7 | mA | VDD=5.0V, FOSC=32 MHz EC high-power, 0.1µF on VCAP | 371 | |
| Supply Current, HFINTOSC 16 MHz | IDD | 2.4 | 3 | mA | VDD=5.0V, FOSC=16 MHz HFINTOSC, 0.1µF on VCAP | 372 | |
| Supply Current, HFINTOSC 32 MHz | IDD | 4.1 | 5.7 | mA | VDD=5.0V, FOSC=32 MHz HFINTOSC | 372 | |
| Power-down Base Current | IPD | 20 | 55 | µA | VDD=1.8V, Max at +85°C; WDT, BOR, FVR, T1OSC disabled | 373 | |
| Power-down Base Current | IPD | 26 | 60 | µA | VDD=5.0V, Max at +85°C; WDT, BOR, FVR, T1OSC disabled | 373 | |
| Power-down Base Current | IPD | 26 | 75 | µA | VDD=5.0V, Max at +125°C; WDT, BOR, FVR, T1OSC disabled | 373 | |
| Input Low Voltage, TTL buffer | VIL | 0.8 | V | 4.5V ≤ VDD ≤ 5.5V | 375 | ||
| Input Low Voltage, SMBus levels | VIL | 0.8 | V | 2.7V ≤ VDD ≤ 5.5V | 375 | ||
| Input High Voltage, TTL buffer | VIH | 2 | V | 4.5V ≤ VDD ≤ 5.5V | 375 | ||
| Input High Voltage, SMBus levels | VIH | 2.1 | V | 2.7V ≤ VDD ≤ 5.5V | 375 | ||
| Input Leakage Current, I/O ports | IIL | -5 | 5 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance @ 85°C | 375 | |
| Input Leakage Current, I/O ports | IIL | -125 | 125 | nA | VSS ≤ VPIN ≤ VDD, pin at high-impedance @ 125°C | 375 | |
| Input Leakage Current, MCLR | IIL | 200 | nA | VSS ≤ VPIN ≤ VDD @ 85°C | 375 | ||
| Weak Pull-up Current | IPUR | 25 | 100 | 200 | µA | VDD = 3.3V, VPIN = VSS | 375 |
| Weak Pull-up Current | IPUR | 25 | 140 | 300 | µA | VDD = 5.0V, VPIN = VSS | 375 |
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8mA, VDD = 5V; IOL = 6mA, VDD = 3.3V; IOL = 1.8mA, VDD = 1.8V | 375 | ||
| OSC2 pin capacitive loading | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 376 | ||
| All I/O pins capacitive loading | CIO | 50 | pF | 376 | |||
| Brown-out Reset Voltage | VBOR | 2.38 | 2.5 | 2.73 | V | BORV = 0 | 384 |
| Brown-out Reset Voltage | VBOR | 1.8 | 1.9 | 2.11 | V | BORV = 1 | 384 |
| Brown-out Reset Hysteresis | VHYST | 0 | 25 | 60 | mV | -40°C to +85°C | 384 |
| Internal Calibrated HFINTOSC Frequency, ±5% | HFOSC | -5 | 5 | % | 16.0 MHz, -40°C ≤ TA ≤ +125°C | 381 | |
| Internal LFINTOSC Frequency | LFOSC | -25 | 25 | % | 31 kHz, -40°C ≤ TA ≤ +125°C | 381 | |
| A/D Resolution | NR | 10 | bit | 386 | |||
| A/D Integral Error | EIL | -1.7 | 1.7 | LSb | VREF = 3.0V | 386 | |
| A/D Offset Error | EOFF | -2.5 | 2.5 | LSb | VREF = 3.0V | 386 | |
| A/D Gain Error | EGN | -2 | 2 | LSb | VREF = 3.0V | 386 | |
| A/D Reference Voltage | VREF | 1.8 | V | VREF = (VREF+ minus VREF-) | 386 | ||
| Comparator Input Offset Voltage | VIOFF | 7.5 | 60 | mV | High-Power mode, VICM = VDD/2 | 388 | |
| Absolute Maximum Ambient temperature under bias | -40 | 125 | °C | 365 | |||
| Absolute Maximum Storage temperature | -65 | 150 | °C | 365 | |||
| Absolute Maximum Voltage on VDD | VDD | -0.3 | 6.5 | V | PIC16F1933, with respect to VSS | 365 | |
| Absolute Maximum Voltage on VCAP pin | VCAP | -0.3 | 4 | V | PIC16F1933, with respect to VSS | 365 | |
| Absolute Maximum Voltage on MCLR | -0.3 | 9 | V | with respect to VSS | 365 | ||
| Absolute Maximum current out of VSS pin | 255 | mA | -40°C ≤ TA ≤ +85°C for industrial | 365 | |||
| Absolute Maximum current into VDD pin | 170 | mA | -40°C ≤ TA ≤ +85°C for industrial | 365 | |||
| Absolute Maximum output current sunk by any I/O pin | 25 | mA | 365 | ||||
| Absolute Maximum output current sourced by any I/O pin | 25 | mA | 365 | ||||
| Thermal Resistance Junction to Ambient | θJA | 71 | °C/W | 28-pin SSOP package | 378 | ||
| Thermal Resistance Junction to Case | θJC | 24 | °C/W | 28-pin SSOP package | 378 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | 378 |
CAD (KiCad official)
- Symbol:
PIC16F1933T-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28 (KiCad packages3D, STEP)
- 3D model files:
pic16f1933t-i-etched.step/pic16f1933t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f1933t-i.step/pic16f1933t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (464 pp, sha256
81839274508365b1, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).