Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16F1933T-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28

PIC16F1933T-I from Microchip Tech, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RE3/MCLR/VPP input General purpose input RE3, Master Clear (active-low reset) with internal weak pull-up, or high-voltage programming voltage VPP.
2 RA0/AN0/C12IN0-/C2OUT/SRNQ/SS/VCAP/SEG12 bidirectional General purpose I/O with A/D channel AN0, comparator negative input C12IN0-, C2OUT, SRNQ, SS (via APFCON), VCAP regulator filter (PIC16F1933 only) and LCD SEG12.
3 RA1/AN1/C12IN1-/SEG7 bidirectional General purpose I/O with A/D channel AN1, comparator negative input C12IN1- and LCD SEG7.
4 RA2/AN2/C2IN+/VREF-/DACOUT/COM2 bidirectional General purpose I/O with A/D channel AN2, comparator positive input C2IN+, A/D negative reference VREF-, DAC output DACOUT and LCD COM2.
5 RA3/AN3/C1IN+/VREF+/COM3/SEG15 bidirectional General purpose I/O with A/D channel AN3, comparator positive input C1IN+, A/D positive reference VREF+, LCD COM3 and SEG15.
6 RA4/C1OUT/CPS6/T0CKI/SRQ/CCP5/SEG4 bidirectional General purpose I/O with comparator output C1OUT, capacitive sensing input CPS6, Timer0 clock input T0CKI, SR latch output SRQ, CCP5 and LCD SEG4.
7 RA5/AN4/C2OUT/CPS7/SRNQ/SS/VCAP/SEG5 bidirectional General purpose I/O with A/D channel AN4, C2OUT, capacitive sensing input CPS7, SRNQ, SS, VCAP regulator filter (PIC16F1933 only) and LCD SEG5.
8 VSS power_in Ground reference.
9 RA7/OSC1/CLKIN/SEG2 bidirectional General purpose I/O, crystal/resonator OSC1 (LP, XT, HS modes), external clock input CLKIN (EC mode) and LCD SEG2.
10 RA6/OSC2/CLKOUT/VCAP/SEG1 bidirectional General purpose I/O, crystal/resonator OSC2, FOSC/4 output CLKOUT, VCAP regulator filter (PIC16F1933 only) and LCD SEG1.
11 RC0/T1OSO/T1CKI/P2B bidirectional General purpose I/O with Timer1 oscillator connection T1OSO, Timer1 clock input T1CKI and PWM output P2B.
12 RC1/T1OSI/CCP2/P2A bidirectional General purpose I/O with Timer1 oscillator connection T1OSI and Capture/Compare/PWM CCP2/P2A.
13 RC2/CCP1/P1A/SEG3 bidirectional General purpose I/O with Capture/Compare/PWM CCP1/P1A and LCD SEG3.
14 RC3/SCK/SCL/SEG6 bidirectional General purpose I/O with SPI clock SCK, I2C clock SCL and LCD SEG6.
15 RC4/SDI/SDA/T1G/SEG11 bidirectional General purpose I/O with SPI data input SDI, I2C data SDA, Timer1 gate input T1G and LCD SEG11.
16 RC5/SDO/SEG10 bidirectional General purpose I/O with SPI data output SDO and LCD SEG10.
17 RC6/TX/CK/CCP3/P3A/SEG9 bidirectional General purpose I/O with EUSART asynchronous transmit TX, synchronous clock CK, CCP3/P3A and LCD SEG9.
18 RC7/RX/DT/P3B/SEG8 bidirectional General purpose I/O with EUSART asynchronous receive RX, synchronous data DT, PWM output P3B and LCD SEG8.
19 VSS power_in Ground reference.
20 VDD power_in Positive supply; 1.8V-5.5V (PIC16F1933), 1.8V-3.6V (PIC16LF1933).
21 RB0/AN12/CPS0/CCP4/SRI/INT/SEG0 bidirectional General purpose I/O with interrupt-on-change and weak pull-up, A/D channel AN12, capacitive sensing CPS0, CCP4, SR latch input SRI, external interrupt INT and LCD SEG0.
22 RB1/AN10/C12IN3-/CPS1/P1C/VLCD1 bidirectional General purpose I/O with interrupt-on-change and weak pull-up, A/D channel AN10, comparator input C12IN3-, capacitive sensing CPS1, PWM output P1C and LCD analog input VLCD1.
23 RB2/AN8/CPS2/P1B/VLCD2 bidirectional General purpose I/O with interrupt-on-change and weak pull-up, A/D channel AN8, capacitive sensing CPS2, PWM output P1B and LCD analog input VLCD2.
24 RB3/AN9/C12IN2-/CPS3/CCP2/P2A/VLCD3 bidirectional General purpose I/O with interrupt-on-change and weak pull-up, A/D channel AN9, comparator input C12IN2-, capacitive sensing CPS3, CCP2/P2A and LCD analog input VLCD3.
25 RB4/AN11/CPS4/P1D/COM0 bidirectional General purpose I/O with interrupt-on-change and weak pull-up, A/D channel AN11, capacitive sensing CPS4, PWM output P1D and LCD COM0.
26 RB5/AN13/CPS5/P2B/CCP3/P3A/T1G/COM1 bidirectional General purpose I/O with interrupt-on-change and weak pull-up, A/D channel AN13, capacitive sensing CPS5, P2B, CCP3/P3A, Timer1 gate T1G and LCD COM1.
27 RB6/ICSPCLK/ICDCLK/SEG14 bidirectional General purpose I/O with interrupt-on-change and weak pull-up, serial programming clock ICSPCLK, in-circuit debug clock ICDCLK and LCD SEG14.
28 RB7/ICSPDAT/ICDDAT/SEG13 bidirectional General purpose I/O with interrupt-on-change and weak pull-up, ICSP data I/O ICSPDAT, in-circuit debug data ICDDAT and LCD SEG13.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-28
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 1.8 5.5 V PIC16F1933, FOSC ≤ 16 MHz 368
Supply Voltage VDD 2.5 5.5 V PIC16F1933, FOSC ≤ 32 MHz (Note 2) 368
RAM Data Retention Voltage VDR 1.7 V PIC16F1933, Device in Sleep mode 368
Fixed Voltage Reference Voltage for ADC VADFVR -8 6 % 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V 368
Fixed Voltage Reference Voltage for Comparator and DAC VCDAFVR -11 7 % 1.024V, VDD ≥ 2.5V; 2.048V, VDD ≥ 2.5V; 4.096V, VDD ≥ 4.75V 368
Fixed Voltage Reference Voltage for LCD Bias VLCDFVR -11 10 % 3.072V, VDD ≥ 3.6V 368
VDD Rise Rate to ensure internal Power-on Reset SVDD 0.05 V/ms 368
Power-on Reset Release Voltage VPOR 1.6 V 368
Power-on Reset Rearm Voltage VPORR 1.42 V PIC16F1933 368
Supply Current, LP mode IDD 23 63 µA VDD=1.8V, FOSC=32 kHz LP, -40°C to +85°C, 0.1µF on VCAP 370
Supply Current, XT 4 MHz IDD 700 850 µA VDD=5.0V, FOSC=4 MHz XT, 0.1µF on VCAP 370
Supply Current, EC 32 MHz IDD 3.9 4.7 mA VDD=5.0V, FOSC=32 MHz EC high-power, 0.1µF on VCAP 371
Supply Current, HFINTOSC 16 MHz IDD 2.4 3 mA VDD=5.0V, FOSC=16 MHz HFINTOSC, 0.1µF on VCAP 372
Supply Current, HFINTOSC 32 MHz IDD 4.1 5.7 mA VDD=5.0V, FOSC=32 MHz HFINTOSC 372
Power-down Base Current IPD 20 55 µA VDD=1.8V, Max at +85°C; WDT, BOR, FVR, T1OSC disabled 373
Power-down Base Current IPD 26 60 µA VDD=5.0V, Max at +85°C; WDT, BOR, FVR, T1OSC disabled 373
Power-down Base Current IPD 26 75 µA VDD=5.0V, Max at +125°C; WDT, BOR, FVR, T1OSC disabled 373
Input Low Voltage, TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 375
Input Low Voltage, SMBus levels VIL 0.8 V 2.7V ≤ VDD ≤ 5.5V 375
Input High Voltage, TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V 375
Input High Voltage, SMBus levels VIH 2.1 V 2.7V ≤ VDD ≤ 5.5V 375
Input Leakage Current, I/O ports IIL -5 5 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance @ 85°C 375
Input Leakage Current, I/O ports IIL -125 125 nA VSS ≤ VPIN ≤ VDD, pin at high-impedance @ 125°C 375
Input Leakage Current, MCLR IIL 200 nA VSS ≤ VPIN ≤ VDD @ 85°C 375
Weak Pull-up Current IPUR 25 100 200 µA VDD = 3.3V, VPIN = VSS 375
Weak Pull-up Current IPUR 25 140 300 µA VDD = 5.0V, VPIN = VSS 375
Output Low Voltage, I/O ports VOL 0.6 V IOL = 8mA, VDD = 5V; IOL = 6mA, VDD = 3.3V; IOL = 1.8mA, VDD = 1.8V 375
OSC2 pin capacitive loading COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 376
All I/O pins capacitive loading CIO 50 pF 376
Brown-out Reset Voltage VBOR 2.38 2.5 2.73 V BORV = 0 384
Brown-out Reset Voltage VBOR 1.8 1.9 2.11 V BORV = 1 384
Brown-out Reset Hysteresis VHYST 0 25 60 mV -40°C to +85°C 384
Internal Calibrated HFINTOSC Frequency, ±5% HFOSC -5 5 % 16.0 MHz, -40°C ≤ TA ≤ +125°C 381
Internal LFINTOSC Frequency LFOSC -25 25 % 31 kHz, -40°C ≤ TA ≤ +125°C 381
A/D Resolution NR 10 bit 386
A/D Integral Error EIL -1.7 1.7 LSb VREF = 3.0V 386
A/D Offset Error EOFF -2.5 2.5 LSb VREF = 3.0V 386
A/D Gain Error EGN -2 2 LSb VREF = 3.0V 386
A/D Reference Voltage VREF 1.8 V VREF = (VREF+ minus VREF-) 386
Comparator Input Offset Voltage VIOFF 7.5 60 mV High-Power mode, VICM = VDD/2 388
Absolute Maximum Ambient temperature under bias -40 125 °C 365
Absolute Maximum Storage temperature -65 150 °C 365
Absolute Maximum Voltage on VDD VDD -0.3 6.5 V PIC16F1933, with respect to VSS 365
Absolute Maximum Voltage on VCAP pin VCAP -0.3 4 V PIC16F1933, with respect to VSS 365
Absolute Maximum Voltage on MCLR -0.3 9 V with respect to VSS 365
Absolute Maximum current out of VSS pin 255 mA -40°C ≤ TA ≤ +85°C for industrial 365
Absolute Maximum current into VDD pin 170 mA -40°C ≤ TA ≤ +85°C for industrial 365
Absolute Maximum output current sunk by any I/O pin 25 mA 365
Absolute Maximum output current sourced by any I/O pin 25 mA 365
Thermal Resistance Junction to Ambient θJA 71 °C/W 28-pin SSOP package 378
Thermal Resistance Junction to Case θJC 24 °C/W 28-pin SSOP package 378
Maximum Junction Temperature TJMAX 150 °C 378

CAD (KiCad official)

  • Symbol: PIC16F1933T-I
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28 (KiCad packages3D, STEP)
  • 3D model files: pic16f1933t-i-etched.step / pic16f1933t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f1933t-i.step / pic16f1933t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (464 pp, sha256 81839274508365b1, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF