Generated by kicad-footprint-generator · KiCad file format 20260206
PIC16F19155-I/SO
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC16F19155-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/MCLR/VPP | input | Master clear input with internal weak pull-up (also VPP for programming); RE3 is a general purpose input with interrupt-on-change IOCE3 when MCLR is disabled. |
| 2 | RA0 | bidirectional | General purpose I/O (TTL/ST in, CMOS/OD out) shared with C1IN0-, C2IN0-, ANA0, CLCIN0, IOCA0 and LCD SEG0. |
| 3 | RA1 | bidirectional | General purpose I/O shared with C1IN1-, C2IN1-, ANA1, CLCIN1, IOCA1 and LCD SEG1. |
| 4 | RA2 | bidirectional | General purpose I/O shared with C1IN0+, C2IN0+, ANA2, DAC1OUT1, IOCA2 and LCD SEG2. |
| 5 | RA3 | bidirectional | General purpose I/O shared with C1IN1+, ANA3, VREF+ (ADC and DAC1), IOCA3 and LCD SEG3. |
| 6 | RA4 | bidirectional | General purpose I/O shared with ANA4, T0CKI, IOCA4, LCD SEG4 and a COM output (COM3 in pin table, COM0 in pin diagram). |
| 7 | RA5/VBAT | bidirectional | General purpose I/O shared with MSSP SS, IOCA5 and the RTCC back-up battery input VBAT. |
| 8 | VSS | power_in | Ground reference. |
| 9 | RA7 | bidirectional | General purpose I/O shared with ANA7, LCD SEG7 and CLKIN external clock input. |
| 10 | RA6 | bidirectional | General purpose I/O shared with ANA6, IOCA6, LCD SEG6 and CLKOUT (FOSC/4 output). |
| 11 | RC0 | bidirectional | General purpose I/O shared with T1CKI, SMTWIN1, IOCC0 and SOSCO 32.768 kHz secondary oscillator crystal output. |
| 12 | RC1 | bidirectional | General purpose I/O shared with T4IN, SMTSIG1, CCP2, IOCC1 and SOSCI 32.768 kHz secondary oscillator crystal input. |
| 13 | RC2 | bidirectional | General purpose I/O shared with CCP1, IOCC2, ANC2, LCD SEG18 and COM2. |
| 14 | RC3 | bidirectional | General purpose I/O shared with T2IN, MSSP SCL/SCK, ANC3 and LCD SEG19. |
| 15 | RC4 | bidirectional | General purpose I/O shared with MSSP SDA/SDI, IOCC4, ANC4 and LCD SEG20. |
| 16 | VLCD3 | passive | LCD analog bias voltage input (VLCD3). |
| 17 | RC6 | bidirectional | General purpose I/O shared with EUSART1 TX/CK, IOCC6, ANC6, LCD SEG22, COM5 and VLCD2. |
| 18 | RC7 | bidirectional | General purpose I/O shared with EUSART1 RX/DT, IOCC7, ANC7, LCD SEG23, COM4 and VLCD1. |
| 19 | VSS | power_in | Ground reference. |
| 20 | VDD | power_in | Positive supply voltage input (2.3V to 5.5V for PIC16F19155/56). |
| 21 | RB0 | bidirectional | General purpose I/O shared with CWG1IN, C2IN1+, IOCB0, ANB0, LCD SEG8 and ZCD zero-cross detect input. |
| 22 | RB1 | bidirectional | General purpose I/O with high-current drive (up to 100 mA) shared with C1IN3-, C2IN3-, MSSP SCL/SCK, ANB1 and LCD SEG9. |
| 23 | RB2 | bidirectional | General purpose I/O shared with MSSP SDA/SDI, ANB2, LCD SEG10, COM7 and charge pump capacitor pin CFLY1. |
| 24 | RB3 | bidirectional | General purpose I/O shared with C1IN2-, C2IN2-, ANB3, LCD SEG11, COM6 and charge pump capacitor pin CFLY2. |
| 25 | RB4 | bidirectional | General purpose I/O shared with ADCACT auto-conversion trigger input, IOCB4, ANB4 and LCD COM0. |
| 26 | RB5 | bidirectional | General purpose I/O shared with T1G, IOCB5, ANB5, LCD SEG13 and COM1. |
| 27 | RB6/ICSPCLK | bidirectional | General purpose I/O shared with EUSART2 TX/CK, CLCIN2, ANB6, LCD SEG14 and ICSPCLK programming/debug clock input. |
| 28 | RB7/ICSPDAT | bidirectional | General purpose I/O shared with EUSART2 RX/DT, CLCIN3, ANB7, LCD SEG15, DAC1OUT2 and ICSPDAT programming/debug data I/O. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Supply Voltage (Fosc ≤ 16 MHz) | VDDMIN | 2.3 | V | Fosc ≤ 16 MHz | 668 | ||
| Operating Supply Voltage (Fosc ≤ 32 MHz) | VDDMIN | 2.5 | V | Fosc ≤ 32 MHz | 668 | ||
| Operating Supply Voltage | VDDMAX | 5.5 | V | 668 | |||
| Operating Ambient Temperature (Industrial) | TA_MIN | -40 | °C | Industrial temperature range | 668 | ||
| Operating Ambient Temperature (Industrial) | TA_MAX | 85 | °C | Industrial temperature range | 668 | ||
| Ambient temperature under bias | TA | -40 | 125 | °C | 667 | ||
| Storage temperature | TSTG | -65 | 150 | °C | 667 | ||
| Voltage on VDD pin with respect to VSS (PIC16F) | VDD | -0.3 | 6.5 | V | PIC16F19155/56/75/76/85/86 | 667 | |
| Voltage on MCLR pin with respect to VSS | MCLR | -0.3 | 9 | V | 667 | ||
| Voltage on all other pins with respect to VSS | -0.3 | V | max = VDD + 0.3V | 667 | |||
| Maximum current on VSS pin | 350 | mA | -40°C ≤ TA ≤ +85°C | 667 | |||
| Maximum current on VSS pin | 120 | mA | 85°C ≤ TA ≤ +125°C | 667 | |||
| Maximum current on VDD pin for 28-Pin devices | 250 | mA | -40°C ≤ TA ≤ +85°C | 667 | |||
| Maximum current on VDD pin for 28-Pin devices | 85 | mA | 85°C ≤ TA ≤ +125°C | 667 | |||
| Maximum current on any standard I/O pin | 50 | mA | 667 | ||||
| Clamp current | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 667 | ||
| Total power dissipation | 800 | mW | 667 | ||||
| Supply Current IDD HFINTOSC 16 MHz | IDDHFO16 | 1.82 | 3 | mA | HFINTOSC = 16 MHz; VDD 3.0V | 672 | |
| Supply Current IDD HFINTOSC 32 MHz with PLL | IDDHFOPLL | 3.43 | 5.5 | mA | HFINTOSC = 32 MHz; VDD 3.0V | 672 | |
| Supply Current IDD Idle mode | IDDIDLE | 1.18 | 3 | mA | Idle mode, HFINTOSC = 16 MHz; VDD 3.0V | 672 | |
| Supply Current IDD Doze mode | IDDDOZE | 1.3 | 2.5 | mA | Doze mode, HFINTOSC = 16 MHz, Doze Ratio = 16; VDD 3.0V | 672 | |
| VBAT Current with SOSC + RTCC | IBAT | 1.1 | 5 | µA | VDD 2.5V | 672 | |
| Base IPD (Max. +85°C) | IPD | 0.42 | 4 | µA | VREGPM = 1; VDD 3.0V; Max. +85°C | 673 | |
| Base IPD (Max. +125°C) | IPD | 0.42 | 8 | µA | VREGPM = 1; VDD 3.0V; Max. +125°C | 673 | |
| Low-Frequency Internal Oscillator/WDT (Max. +85°C) | IPD_WDT | 1.2 | 3.4 | µA | VREGPM = 1; VDD 3.0V; Max. +85°C | 673 | |
| Low-Frequency Internal Oscillator/WDT (Max. +125°C) | IPD_WDT | 1.2 | 9 | µA | VREGPM = 1; VDD 3.0V; Max. +125°C | 673 | |
| FVR (Max. +85°C) | IPD_FVR | 48 | 58 | µA | VREGPM = 1; VDD 3.0V; Max. +85°C | 673 | |
| FVR (Max. +125°C) | IPD_FVR | 48 | 76 | µA | VREGPM = 1; VDD 3.0V; Max. +125°C | 673 | |
| Brown-out Reset (BOR) (Max. +85°C) | IPD_BOR | 14 | 17 | µA | VREGPM = 1; VDD 3.0V; Max. +85°C | 673 | |
| Brown-out Reset (BOR) (Max. +125°C) | IPD_BOR | 14 | 19 | µA | VREGPM = 1; VDD 3.0V; Max. +125°C | 673 | |
| ADC Active (Max. +85°C) | IPD_ADCA | 396 | 590 | µA | VREGPM = 1; VDD 3.0V; ADC is converting (FRC) | 673 | |
| ADC Active (Max. +125°C) | IPD_ADCA | 396 | 590 | µA | VREGPM = 1; VDD 3.0V; ADC is converting (FRC); Max. +125°C | 673 | |
| ADC Active with Charge Pump (Max. +85°C) | IPD_ADCA_CHGPUMP | 495 | 602 | µA | VREGPM = 1; VDD 3.0V; Max. +85°C | 673 | |
| ADC Active with Charge Pump (Max. +125°C) | IPD_ADCA_CHGPUMP | 495 | 602 | µA | VREGPM = 1; VDD 3.0V; Max. +125°C | 673 | |
| Comparator C1 (Max. +85°C) | IPD_CMP | 33 | 50 | µA | VREGPM = 1; VDD 3.0V; Max. +85°C | 673 | |
| Comparator C1 (Max. +125°C) | IPD_CMP | 33 | 60 | µA | VREGPM = 1; VDD 3.0V; Max. +125°C | 673 | |
| 1x Gain FVR (1.024V) | VFVR1 | -4 | 4 | % | VDD ≥ 2.5V, -40°C to 85°C | 687 | |
| 2x Gain FVR (2.048V) | VFVR2 | -4 | 4 | % | VDD ≥ 2.5V, -40°C to 85°C | 687 | |
| 4x Gain FVR (4.096V) | VFVR4 | -5 | 5 | % | VDD ≥ 4.75V, -40°C to 85°C | 687 | |
| TTL Input Low Voltage (I/O PORT) | VIL | 0.8 | V | D300 with TTL buffer; 4.5V ≤ VDD ≤ 5.5V | 674 | ||
| TTL Input High Voltage (I/O PORT) | VIH | 2 | V | D320 with TTL buffer; 4.5V ≤ VDD ≤ 5.5V | 674 | ||
| SMBus Input Low Voltage (I/O PORT) | VIL | 0.8 | V | D304 with SMBus levels; 2.7V ≤ VDD ≤ 5.5V | 674 | ||
| SMBus Input High Voltage (I/O PORT) | VIH | 2.1 | V | D324 with SMBus levels; 2.7V ≤ VDD ≤ 5.5V | 674 | ||
| Input Leakage Current (I/O Ports) | IIL | -125 | 5 | 125 | nA | VSS ≤ VPIN ≤ VDD; pin at high-impedance, 85°C | 674 |
| Input Leakage Current (MCLR) | IIL | -200 | 50 | 200 | nA | VSS ≤ VPIN ≤ VDD; pin at high-impedance, 85°C | 674 |
| Weak Pull-up Current | IPUR | 25 | 120 | 200 | µA | VDD = 3.0V, VPIN = VSS | 674 |
| Input Capacitance (All I/O pins) | CIO | 5 | 50 | pF | 674 | ||
| Standard I/O Output Low Voltage | VOL | 0.6 | V | Standard I/O ports; IOL = 8 mA, VDD = 5.0V | 674 | ||
| Supply Voltage RAM Data Retention | VDR | 1.7 | V | Device in Sleep mode | 670 | ||
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | BOR or LPBOR disabled | 670 | ||
| Self-Timed Row Erase or Self-Timed Write | TP_REW | 2 | 2.5 | ms | 675 | ||
| Thermal Resistance Junction to Ambient (28-pin SOIC) | θJA | 80 | °C/W | 28-pin SOIC package | 676 | ||
| Thermal Resistance Junction to Case (28-pin SOIC) | θJC | 24 | °C/W | 28-pin SOIC package | 676 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | 676 | |||
| POR Release Voltage | VPOR | 1.6 | V | BOR or LPBOR disabled | 670 | ||
| POR Rearm Voltage | VPORR | 1.5 | V | BOR or LPBOR disabled | 670 | ||
| Characteristic Retention (Program Flash) | TP_RET | 40 | Year | Provided no other specifications are violated | 675 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PPS | body RxyPPS | 368 |
CAD (KiCad official)
- Symbol:
PIC16F19155-I - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic16f19155-i-etched.step/pic16f19155-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f19155-i.step/pic16f19155-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (754 pp, sha256
4c376d67b2d02e01, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16F19155-I/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F19155-I/SS