Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16F19155-I/SO

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil

PIC16F19155-I from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RE3/MCLR/VPP input Master clear input with internal weak pull-up (also VPP for programming); RE3 is a general purpose input with interrupt-on-change IOCE3 when MCLR is disabled.
2 RA0 bidirectional General purpose I/O (TTL/ST in, CMOS/OD out) shared with C1IN0-, C2IN0-, ANA0, CLCIN0, IOCA0 and LCD SEG0.
3 RA1 bidirectional General purpose I/O shared with C1IN1-, C2IN1-, ANA1, CLCIN1, IOCA1 and LCD SEG1.
4 RA2 bidirectional General purpose I/O shared with C1IN0+, C2IN0+, ANA2, DAC1OUT1, IOCA2 and LCD SEG2.
5 RA3 bidirectional General purpose I/O shared with C1IN1+, ANA3, VREF+ (ADC and DAC1), IOCA3 and LCD SEG3.
6 RA4 bidirectional General purpose I/O shared with ANA4, T0CKI, IOCA4, LCD SEG4 and a COM output (COM3 in pin table, COM0 in pin diagram).
7 RA5/VBAT bidirectional General purpose I/O shared with MSSP SS, IOCA5 and the RTCC back-up battery input VBAT.
8 VSS power_in Ground reference.
9 RA7 bidirectional General purpose I/O shared with ANA7, LCD SEG7 and CLKIN external clock input.
10 RA6 bidirectional General purpose I/O shared with ANA6, IOCA6, LCD SEG6 and CLKOUT (FOSC/4 output).
11 RC0 bidirectional General purpose I/O shared with T1CKI, SMTWIN1, IOCC0 and SOSCO 32.768 kHz secondary oscillator crystal output.
12 RC1 bidirectional General purpose I/O shared with T4IN, SMTSIG1, CCP2, IOCC1 and SOSCI 32.768 kHz secondary oscillator crystal input.
13 RC2 bidirectional General purpose I/O shared with CCP1, IOCC2, ANC2, LCD SEG18 and COM2.
14 RC3 bidirectional General purpose I/O shared with T2IN, MSSP SCL/SCK, ANC3 and LCD SEG19.
15 RC4 bidirectional General purpose I/O shared with MSSP SDA/SDI, IOCC4, ANC4 and LCD SEG20.
16 VLCD3 passive LCD analog bias voltage input (VLCD3).
17 RC6 bidirectional General purpose I/O shared with EUSART1 TX/CK, IOCC6, ANC6, LCD SEG22, COM5 and VLCD2.
18 RC7 bidirectional General purpose I/O shared with EUSART1 RX/DT, IOCC7, ANC7, LCD SEG23, COM4 and VLCD1.
19 VSS power_in Ground reference.
20 VDD power_in Positive supply voltage input (2.3V to 5.5V for PIC16F19155/56).
21 RB0 bidirectional General purpose I/O shared with CWG1IN, C2IN1+, IOCB0, ANB0, LCD SEG8 and ZCD zero-cross detect input.
22 RB1 bidirectional General purpose I/O with high-current drive (up to 100 mA) shared with C1IN3-, C2IN3-, MSSP SCL/SCK, ANB1 and LCD SEG9.
23 RB2 bidirectional General purpose I/O shared with MSSP SDA/SDI, ANB2, LCD SEG10, COM7 and charge pump capacitor pin CFLY1.
24 RB3 bidirectional General purpose I/O shared with C1IN2-, C2IN2-, ANB3, LCD SEG11, COM6 and charge pump capacitor pin CFLY2.
25 RB4 bidirectional General purpose I/O shared with ADCACT auto-conversion trigger input, IOCB4, ANB4 and LCD COM0.
26 RB5 bidirectional General purpose I/O shared with T1G, IOCB5, ANB5, LCD SEG13 and COM1.
27 RB6/ICSPCLK bidirectional General purpose I/O shared with EUSART2 TX/CK, CLCIN2, ANB6, LCD SEG14 and ICSPCLK programming/debug clock input.
28 RB7/ICSPDAT bidirectional General purpose I/O shared with EUSART2 RX/DT, CLCIN3, ANB7, LCD SEG15, DAC1OUT2 and ICSPDAT programming/debug data I/O.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-28-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Supply Voltage (Fosc ≤ 16 MHz) VDDMIN 2.3 V Fosc ≤ 16 MHz 668
Operating Supply Voltage (Fosc ≤ 32 MHz) VDDMIN 2.5 V Fosc ≤ 32 MHz 668
Operating Supply Voltage VDDMAX 5.5 V 668
Operating Ambient Temperature (Industrial) TA_MIN -40 °C Industrial temperature range 668
Operating Ambient Temperature (Industrial) TA_MAX 85 °C Industrial temperature range 668
Ambient temperature under bias TA -40 125 °C 667
Storage temperature TSTG -65 150 °C 667
Voltage on VDD pin with respect to VSS (PIC16F) VDD -0.3 6.5 V PIC16F19155/56/75/76/85/86 667
Voltage on MCLR pin with respect to VSS MCLR -0.3 9 V 667
Voltage on all other pins with respect to VSS -0.3 V max = VDD + 0.3V 667
Maximum current on VSS pin 350 mA -40°C ≤ TA ≤ +85°C 667
Maximum current on VSS pin 120 mA 85°C ≤ TA ≤ +125°C 667
Maximum current on VDD pin for 28-Pin devices 250 mA -40°C ≤ TA ≤ +85°C 667
Maximum current on VDD pin for 28-Pin devices 85 mA 85°C ≤ TA ≤ +125°C 667
Maximum current on any standard I/O pin 50 mA 667
Clamp current IK 20 mA VPIN < 0 or VPIN > VDD 667
Total power dissipation 800 mW 667
Supply Current IDD HFINTOSC 16 MHz IDDHFO16 1.82 3 mA HFINTOSC = 16 MHz; VDD 3.0V 672
Supply Current IDD HFINTOSC 32 MHz with PLL IDDHFOPLL 3.43 5.5 mA HFINTOSC = 32 MHz; VDD 3.0V 672
Supply Current IDD Idle mode IDDIDLE 1.18 3 mA Idle mode, HFINTOSC = 16 MHz; VDD 3.0V 672
Supply Current IDD Doze mode IDDDOZE 1.3 2.5 mA Doze mode, HFINTOSC = 16 MHz, Doze Ratio = 16; VDD 3.0V 672
VBAT Current with SOSC + RTCC IBAT 1.1 5 µA VDD 2.5V 672
Base IPD (Max. +85°C) IPD 0.42 4 µA VREGPM = 1; VDD 3.0V; Max. +85°C 673
Base IPD (Max. +125°C) IPD 0.42 8 µA VREGPM = 1; VDD 3.0V; Max. +125°C 673
Low-Frequency Internal Oscillator/WDT (Max. +85°C) IPD_WDT 1.2 3.4 µA VREGPM = 1; VDD 3.0V; Max. +85°C 673
Low-Frequency Internal Oscillator/WDT (Max. +125°C) IPD_WDT 1.2 9 µA VREGPM = 1; VDD 3.0V; Max. +125°C 673
FVR (Max. +85°C) IPD_FVR 48 58 µA VREGPM = 1; VDD 3.0V; Max. +85°C 673
FVR (Max. +125°C) IPD_FVR 48 76 µA VREGPM = 1; VDD 3.0V; Max. +125°C 673
Brown-out Reset (BOR) (Max. +85°C) IPD_BOR 14 17 µA VREGPM = 1; VDD 3.0V; Max. +85°C 673
Brown-out Reset (BOR) (Max. +125°C) IPD_BOR 14 19 µA VREGPM = 1; VDD 3.0V; Max. +125°C 673
ADC Active (Max. +85°C) IPD_ADCA 396 590 µA VREGPM = 1; VDD 3.0V; ADC is converting (FRC) 673
ADC Active (Max. +125°C) IPD_ADCA 396 590 µA VREGPM = 1; VDD 3.0V; ADC is converting (FRC); Max. +125°C 673
ADC Active with Charge Pump (Max. +85°C) IPD_ADCA_CHGPUMP 495 602 µA VREGPM = 1; VDD 3.0V; Max. +85°C 673
ADC Active with Charge Pump (Max. +125°C) IPD_ADCA_CHGPUMP 495 602 µA VREGPM = 1; VDD 3.0V; Max. +125°C 673
Comparator C1 (Max. +85°C) IPD_CMP 33 50 µA VREGPM = 1; VDD 3.0V; Max. +85°C 673
Comparator C1 (Max. +125°C) IPD_CMP 33 60 µA VREGPM = 1; VDD 3.0V; Max. +125°C 673
1x Gain FVR (1.024V) VFVR1 -4 4 % VDD ≥ 2.5V, -40°C to 85°C 687
2x Gain FVR (2.048V) VFVR2 -4 4 % VDD ≥ 2.5V, -40°C to 85°C 687
4x Gain FVR (4.096V) VFVR4 -5 5 % VDD ≥ 4.75V, -40°C to 85°C 687
TTL Input Low Voltage (I/O PORT) VIL 0.8 V D300 with TTL buffer; 4.5V ≤ VDD ≤ 5.5V 674
TTL Input High Voltage (I/O PORT) VIH 2 V D320 with TTL buffer; 4.5V ≤ VDD ≤ 5.5V 674
SMBus Input Low Voltage (I/O PORT) VIL 0.8 V D304 with SMBus levels; 2.7V ≤ VDD ≤ 5.5V 674
SMBus Input High Voltage (I/O PORT) VIH 2.1 V D324 with SMBus levels; 2.7V ≤ VDD ≤ 5.5V 674
Input Leakage Current (I/O Ports) IIL -125 5 125 nA VSS ≤ VPIN ≤ VDD; pin at high-impedance, 85°C 674
Input Leakage Current (MCLR) IIL -200 50 200 nA VSS ≤ VPIN ≤ VDD; pin at high-impedance, 85°C 674
Weak Pull-up Current IPUR 25 120 200 µA VDD = 3.0V, VPIN = VSS 674
Input Capacitance (All I/O pins) CIO 5 50 pF 674
Standard I/O Output Low Voltage VOL 0.6 V Standard I/O ports; IOL = 8 mA, VDD = 5.0V 674
Supply Voltage RAM Data Retention VDR 1.7 V Device in Sleep mode 670
VDD Rise Rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms BOR or LPBOR disabled 670
Self-Timed Row Erase or Self-Timed Write TP_REW 2 2.5 ms 675
Thermal Resistance Junction to Ambient (28-pin SOIC) θJA 80 °C/W 28-pin SOIC package 676
Thermal Resistance Junction to Case (28-pin SOIC) θJC 24 °C/W 28-pin SOIC package 676
Maximum Junction Temperature TJMAX 150 °C 676
POR Release Voltage VPOR 1.6 V BOR or LPBOR disabled 670
POR Rearm Voltage VPORR 1.5 V BOR or LPBOR disabled 670
Characteristic Retention (Program Flash) TP_RET 40 Year Provided no other specifications are violated 675

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PPS body RxyPPS 368

CAD (KiCad official)

  • Symbol: PIC16F19155-I
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: pic16f19155-i-etched.step / pic16f19155-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f19155-i.step / pic16f19155-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (754 pp, sha256 4c376d67b2d02e01, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC16F19155-I/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC16F19155-I/SS