main
Ray
Publish 0.1.0
2861b9a
PIC16F1713T-I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC16F1713T-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/MCLR/VPP | input | Input-only pin that serves as the master clear (MCLR) reset input or the VPP programming high-voltage input, per the 28-pin allocation table. |
| 2 | RA0 | bidirectional | Digital I/O (PORTA bit 0) with analog input AN0, CLCIN0 peripheral input, interrupt-on-change and selectable weak pull-up. |
| 3 | RA1 | bidirectional | Digital I/O (PORTA bit 1) with analog input AN1, OPA1OUT, CLCIN1 peripheral input, interrupt-on-change and selectable weak pull-up. |
| 4 | RA2 | bidirectional | Digital I/O (PORTA bit 2) with analog input AN2, VREF- and DAC1OUT1 output, interrupt-on-change and selectable weak pull-up. |
| 5 | RA3 | bidirectional | Digital I/O (PORTA bit 3) with analog input AN3 and VREF+, interrupt-on-change and selectable weak pull-up. |
| 6 | RA4 | bidirectional | Digital I/O (PORTA bit 4) with OPA1IN+ input, T0CKI peripheral input, interrupt-on-change and selectable weak pull-up. |
| 7 | RA5 | bidirectional | Digital I/O (PORTA bit 5) with analog input AN4, OPA1IN-, DAC2OUT1 output, nSS peripheral input, interrupt-on-change and selectable weak pull-up. |
| 8 | VSS | power_in | Ground reference for the device. |
| 9 | RA7 | bidirectional | Digital I/O (PORTA bit 7) that is also the OSC1 / CLKIN oscillator input and NCO clock input (NCOCLK), with interrupt-on-change. |
| 10 | RA6 | bidirectional | Digital I/O (PORTA bit 6) that is also the OSC2 oscillator output and CLKOUT output, with interrupt-on-change. |
| 11 | RC0 | bidirectional | Digital I/O (PORTC bit 0) with interrupt-on-change and selectable weak pull-up; the alternate peripheral mapping in the extracted table is partially garbled. |
| 12 | RC1 | bidirectional | Digital I/O (PORTC bit 1) with SOSCI secondary oscillator input, interrupt-on-change and selectable weak pull-up. |
| 13 | RC2 | bidirectional | Digital I/O (PORTC bit 2) with analog input AN14, interrupt-on-change and selectable weak pull-up. |
| 14 | RC3 | bidirectional | Digital I/O (PORTC bit 3) with analog input AN15, SCK peripheral function, interrupt-on-change and selectable weak pull-up. |
| 15 | RC4 | bidirectional | Digital I/O (PORTC bit 4) with analog input AN16, interrupt-on-change and selectable weak pull-up; the extracted peripheral mapping for this pin is partially garbled. |
| 16 | RC5 | bidirectional | Digital I/O (PORTC bit 5) with analog input AN17, interrupt-on-change and selectable weak pull-up. |
| 17 | RC6 | bidirectional | Digital I/O (PORTC bit 6) with analog input AN18, interrupt-on-change and selectable weak pull-up. |
| 18 | RC7 | bidirectional | Digital I/O (PORTC bit 7) with analog input AN19, interrupt-on-change and selectable weak pull-up. |
| 19 | VSS | power_in | Ground reference for the device. |
| 20 | VDD | power_in | Positive supply; the datasheet gives 2.3V to 5.5V for PIC16F170X/171X (1.8V to 3.6V for PIC16LF170X/171X). |
| 21 | RB0 | bidirectional | Digital I/O (PORTB bit 0) with analog input AN12, ZCD zero-cross detector input, INT external interrupt input and interrupt-on-change. |
| 22 | RB1 | bidirectional | Digital I/O (PORTB bit 1) with analog input AN10, OPA2OUT and interrupt-on-change. |
| 23 | RB2 | bidirectional | Digital I/O (PORTB bit 2) with analog input AN8, OPA2IN- and interrupt-on-change. |
| 24 | RB3 | bidirectional | Digital I/O (PORTB bit 3) with analog input AN9, OPA2IN+ and interrupt-on-change. |
| 25 | RB4 | bidirectional | Digital I/O (PORTB bit 4) with analog input AN11, interrupt-on-change and selectable weak pull-up. |
| 26 | RB5 | bidirectional | Digital I/O (PORTB bit 5) with analog input AN13, T1G timer1 gate input, interrupt-on-change and selectable weak pull-up. |
| 27 | RB6 | bidirectional | Digital I/O (PORTB bit 6) that is also the ICSPCLK in-circuit programming clock, with SCL, CLCIN2 input, interrupt-on-change and selectable weak pull-up. |
| 28 | RB7 | bidirectional | Digital I/O (PORTB bit 7) that is also the ICSPDAT in-circuit programming data pin, with DAC1OUT2 and DAC2OUT2 outputs, CLCIN3 input, interrupt-on-change and selectable weak pull-up. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range (PIC16F170X/171X, non-L part) | 2.3 | 5.5 | V | PIC16F170X/171X (not the PIC16LF variant) | 1 | ||
| Temperature Range - Industrial | -40 | 85 | °C | Industrial grade (-I suffix) | 1 |
CAD (KiCad official)
- Symbol:
PIC16F1713T-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic16f1713t-i-etched.step/pic16f1713t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f1713t-i.step/pic16f1713t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (18 pp, sha256
91827b6a20ffbd6f, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PIC16F1713T-I
**Microchip Tech** · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC16F1713T-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RE3/MCLR/VPP | input | Input-only pin that serves as the master clear (MCLR) reset input or the VPP programming high-voltage input, per the 28-pin allocation table. |
| 2 | RA0 | bidirectional | Digital I/O (PORTA bit 0) with analog input AN0, CLCIN0 peripheral input, interrupt-on-change and selectable weak pull-up. |
| 3 | RA1 | bidirectional | Digital I/O (PORTA bit 1) with analog input AN1, OPA1OUT, CLCIN1 peripheral input, interrupt-on-change and selectable weak pull-up. |
| 4 | RA2 | bidirectional | Digital I/O (PORTA bit 2) with analog input AN2, VREF- and DAC1OUT1 output, interrupt-on-change and selectable weak pull-up. |
| 5 | RA3 | bidirectional | Digital I/O (PORTA bit 3) with analog input AN3 and VREF+, interrupt-on-change and selectable weak pull-up. |
| 6 | RA4 | bidirectional | Digital I/O (PORTA bit 4) with OPA1IN+ input, T0CKI peripheral input, interrupt-on-change and selectable weak pull-up. |
| 7 | RA5 | bidirectional | Digital I/O (PORTA bit 5) with analog input AN4, OPA1IN-, DAC2OUT1 output, nSS peripheral input, interrupt-on-change and selectable weak pull-up. |
| 8 | VSS | power_in | Ground reference for the device. |
| 9 | RA7 | bidirectional | Digital I/O (PORTA bit 7) that is also the OSC1 / CLKIN oscillator input and NCO clock input (NCOCLK), with interrupt-on-change. |
| 10 | RA6 | bidirectional | Digital I/O (PORTA bit 6) that is also the OSC2 oscillator output and CLKOUT output, with interrupt-on-change. |
| 11 | RC0 | bidirectional | Digital I/O (PORTC bit 0) with interrupt-on-change and selectable weak pull-up; the alternate peripheral mapping in the extracted table is partially garbled. |
| 12 | RC1 | bidirectional | Digital I/O (PORTC bit 1) with SOSCI secondary oscillator input, interrupt-on-change and selectable weak pull-up. |
| 13 | RC2 | bidirectional | Digital I/O (PORTC bit 2) with analog input AN14, interrupt-on-change and selectable weak pull-up. |
| 14 | RC3 | bidirectional | Digital I/O (PORTC bit 3) with analog input AN15, SCK peripheral function, interrupt-on-change and selectable weak pull-up. |
| 15 | RC4 | bidirectional | Digital I/O (PORTC bit 4) with analog input AN16, interrupt-on-change and selectable weak pull-up; the extracted peripheral mapping for this pin is partially garbled. |
| 16 | RC5 | bidirectional | Digital I/O (PORTC bit 5) with analog input AN17, interrupt-on-change and selectable weak pull-up. |
| 17 | RC6 | bidirectional | Digital I/O (PORTC bit 6) with analog input AN18, interrupt-on-change and selectable weak pull-up. |
| 18 | RC7 | bidirectional | Digital I/O (PORTC bit 7) with analog input AN19, interrupt-on-change and selectable weak pull-up. |
| 19 | VSS | power_in | Ground reference for the device. |
| 20 | VDD | power_in | Positive supply; the datasheet gives 2.3V to 5.5V for PIC16F170X/171X (1.8V to 3.6V for PIC16LF170X/171X). |
| 21 | RB0 | bidirectional | Digital I/O (PORTB bit 0) with analog input AN12, ZCD zero-cross detector input, INT external interrupt input and interrupt-on-change. |
| 22 | RB1 | bidirectional | Digital I/O (PORTB bit 1) with analog input AN10, OPA2OUT and interrupt-on-change. |
| 23 | RB2 | bidirectional | Digital I/O (PORTB bit 2) with analog input AN8, OPA2IN- and interrupt-on-change. |
| 24 | RB3 | bidirectional | Digital I/O (PORTB bit 3) with analog input AN9, OPA2IN+ and interrupt-on-change. |
| 25 | RB4 | bidirectional | Digital I/O (PORTB bit 4) with analog input AN11, interrupt-on-change and selectable weak pull-up. |
| 26 | RB5 | bidirectional | Digital I/O (PORTB bit 5) with analog input AN13, T1G timer1 gate input, interrupt-on-change and selectable weak pull-up. |
| 27 | RB6 | bidirectional | Digital I/O (PORTB bit 6) that is also the ICSPCLK in-circuit programming clock, with SCL, CLCIN2 input, interrupt-on-change and selectable weak pull-up. |
| 28 | RB7 | bidirectional | Digital I/O (PORTB bit 7) that is also the ICSPDAT in-circuit programming data pin, with DAC1OUT2 and DAC2OUT2 outputs, CLCIN3 input, interrupt-on-change and selectable weak pull-up. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range (PIC16F170X/171X, non-L part) | | 2.3 | | 5.5 | V | PIC16F170X/171X (not the PIC16LF variant) | 1 |
| Temperature Range - Industrial | | -40 | | 85 | °C | Industrial grade (-I suffix) | 1 |
## CAD (KiCad official)
- Symbol: `PIC16F1713T-I`
- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`
- 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files: `pic16f1713t-i-etched.step` / `pic16f1713t-i-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic16f1713t-i.step` / `pic16f1713t-i.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/pic16f1713t-i-datasheet.pdf) (18 pp, sha256 `91827b6a20ffbd6f`, retrieved 2026-10-29, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic16f1713t-i-datasheet.pdf)