Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16F1713T-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil

PIC16F1713T-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RE3/MCLR/VPP input Input-only pin that serves as the master clear (MCLR) reset input or the VPP programming high-voltage input, per the 28-pin allocation table.
2 RA0 bidirectional Digital I/O (PORTA bit 0) with analog input AN0, CLCIN0 peripheral input, interrupt-on-change and selectable weak pull-up.
3 RA1 bidirectional Digital I/O (PORTA bit 1) with analog input AN1, OPA1OUT, CLCIN1 peripheral input, interrupt-on-change and selectable weak pull-up.
4 RA2 bidirectional Digital I/O (PORTA bit 2) with analog input AN2, VREF- and DAC1OUT1 output, interrupt-on-change and selectable weak pull-up.
5 RA3 bidirectional Digital I/O (PORTA bit 3) with analog input AN3 and VREF+, interrupt-on-change and selectable weak pull-up.
6 RA4 bidirectional Digital I/O (PORTA bit 4) with OPA1IN+ input, T0CKI peripheral input, interrupt-on-change and selectable weak pull-up.
7 RA5 bidirectional Digital I/O (PORTA bit 5) with analog input AN4, OPA1IN-, DAC2OUT1 output, nSS peripheral input, interrupt-on-change and selectable weak pull-up.
8 VSS power_in Ground reference for the device.
9 RA7 bidirectional Digital I/O (PORTA bit 7) that is also the OSC1 / CLKIN oscillator input and NCO clock input (NCOCLK), with interrupt-on-change.
10 RA6 bidirectional Digital I/O (PORTA bit 6) that is also the OSC2 oscillator output and CLKOUT output, with interrupt-on-change.
11 RC0 bidirectional Digital I/O (PORTC bit 0) with interrupt-on-change and selectable weak pull-up; the alternate peripheral mapping in the extracted table is partially garbled.
12 RC1 bidirectional Digital I/O (PORTC bit 1) with SOSCI secondary oscillator input, interrupt-on-change and selectable weak pull-up.
13 RC2 bidirectional Digital I/O (PORTC bit 2) with analog input AN14, interrupt-on-change and selectable weak pull-up.
14 RC3 bidirectional Digital I/O (PORTC bit 3) with analog input AN15, SCK peripheral function, interrupt-on-change and selectable weak pull-up.
15 RC4 bidirectional Digital I/O (PORTC bit 4) with analog input AN16, interrupt-on-change and selectable weak pull-up; the extracted peripheral mapping for this pin is partially garbled.
16 RC5 bidirectional Digital I/O (PORTC bit 5) with analog input AN17, interrupt-on-change and selectable weak pull-up.
17 RC6 bidirectional Digital I/O (PORTC bit 6) with analog input AN18, interrupt-on-change and selectable weak pull-up.
18 RC7 bidirectional Digital I/O (PORTC bit 7) with analog input AN19, interrupt-on-change and selectable weak pull-up.
19 VSS power_in Ground reference for the device.
20 VDD power_in Positive supply; the datasheet gives 2.3V to 5.5V for PIC16F170X/171X (1.8V to 3.6V for PIC16LF170X/171X).
21 RB0 bidirectional Digital I/O (PORTB bit 0) with analog input AN12, ZCD zero-cross detector input, INT external interrupt input and interrupt-on-change.
22 RB1 bidirectional Digital I/O (PORTB bit 1) with analog input AN10, OPA2OUT and interrupt-on-change.
23 RB2 bidirectional Digital I/O (PORTB bit 2) with analog input AN8, OPA2IN- and interrupt-on-change.
24 RB3 bidirectional Digital I/O (PORTB bit 3) with analog input AN9, OPA2IN+ and interrupt-on-change.
25 RB4 bidirectional Digital I/O (PORTB bit 4) with analog input AN11, interrupt-on-change and selectable weak pull-up.
26 RB5 bidirectional Digital I/O (PORTB bit 5) with analog input AN13, T1G timer1 gate input, interrupt-on-change and selectable weak pull-up.
27 RB6 bidirectional Digital I/O (PORTB bit 6) that is also the ICSPCLK in-circuit programming clock, with SCL, CLCIN2 input, interrupt-on-change and selectable weak pull-up.
28 RB7 bidirectional Digital I/O (PORTB bit 7) that is also the ICSPDAT in-circuit programming data pin, with DAC1OUT2 and DAC2OUT2 outputs, CLCIN3 input, interrupt-on-change and selectable weak pull-up.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-28-208mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range (PIC16F170X/171X, non-L part) 2.3 5.5 V PIC16F170X/171X (not the PIC16LF variant) 1
Temperature Range - Industrial -40 85 °C Industrial grade (-I suffix) 1

CAD (KiCad official)

  • Symbol: PIC16F1713T-I
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: pic16f1713t-i-etched.step / pic16f1713t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f1713t-i.step / pic16f1713t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (18 pp, sha256 91827b6a20ffbd6f, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF