main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers pic16f1708-e: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
pic16f1708-e-etched.glb Publish 0.1.0 · Ray
pic16f1708-e-etched.step pic16f1708-e: factory component page (tier=mfr) · Ray
pic16f1708-e-hero.glb pic16f1708-e: hero GLB from the etched model (keeps the MPN mark) · Ray
pic16f1708-e-hero.overlay.json Publish 0.1.0 · Ray
pic16f1708-e.glb Publish 0.1.0 · Ray
pic16f1708-e.kicad_mod Publish 0.1.0 · Ray
pic16f1708-e.kicad_sym Publish 0.1.0 · Ray
pic16f1708-e.lbr Publish 0.1.0 · Ray
pic16f1708-e.step Publish 0.1.0 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 21 pins · Ray

PIC16F1708-E

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-20-EP(4x4)

PIC16F1708-E from Microchip Tech, in a QFN-20-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RA3/MCLR/VPP input Input-only pin (TTL/ST) that can be used as general purpose input, as MCLR master clear with internal pull-up when MCLRE is enabled, or as VPP high-voltage programming input.
2 RC5 bidirectional General purpose I/O (TTL/ST input, CMOS output) that can also be used as CCP1 capture/compare/PWM1 and as OPA2IN+ and RX inputs per the PPS selection.
3 RC4 bidirectional General purpose I/O (TTL/ST input, CMOS output) that can also be used as the CLCIN1 configurable logic cell source input.
4 RC3 bidirectional General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 7 (AN7), comparator C1IN3-/C2IN3- inputs, OPA2OUT op amp 2 output, CCP2 capture/compare/PWM2, and CLCIN0 input.
5 RC6 bidirectional General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 8 (AN8), OPA2IN- op amp 2 inverting input, and SPI slave select input (SS).
6 RC7 bidirectional General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 9 (AN9) and OPA2IN+ op amp 2 non-inverting input.
7 RB7 bidirectional General purpose I/O (TTL/ST input, CMOS output) that can also be used as the USART synchronous clock (CK).
8 RB6 bidirectional General purpose I/O (TTL/ST input, CMOS output) that can also be used as SPI data input (SDI) and I2C clock (SCL, open-drain output).
9 RB5 bidirectional General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 11 (AN11), OPA1IN+ op amp 1 non-inverting input, and USART asynchronous input (RX).
10 RB4 bidirectional General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 10 (AN10), OPA1IN- op amp 1 inverting input, SPI clock (SCK), and I2C data (SDA, open-drain).
11 RC2 bidirectional General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 6 (AN6), comparator C1IN2-/C2IN2- inputs, and OPA1OUT op amp 1 output.
12 RC1 bidirectional General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 5 (AN5), comparator C1IN1-/C2IN1- inputs, and CLCIN2 configurable logic cell input.
13 RC0 bidirectional General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 4 (AN4) and comparator C2IN+ input.
14 RA2 bidirectional General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 2 (AN2), DAC1OUT2 output, zero-cross detection current source/sink (ZCD), Timer0 clock input (T0CKI), COG input (COGIN), and external interrupt (INT).
15 RA1 bidirectional General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 1 (AN1), positive ADC reference VREF+, comparator C1IN0-/C2IN0- inputs, and the ICSP serial programming clock (ICSPCLK).
16 RA0 bidirectional General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 0 (AN0), negative ADC reference VREF-, comparator C1IN+ input, DAC1OUT1 output, and ICSP data (ICSPDAT).
17 VSS power_in Ground reference for the device.
18 VDD power_in Positive supply; the PIC16F1704/8 operating range is 2.3V-5.5V (the 1.8V-3.6V range applies to PIC16LF1704/8).
19 RA5 bidirectional General purpose I/O (TTL/ST input, CMOS output) that can also be used as Timer1 clock input (T1CKI), secondary oscillator input (SOSCI), CLCIN3 input, OSC1 crystal/resonator connection, or CLKIN external clock input in EC mode.
20 RA4 bidirectional General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 3 (AN3), Timer1 gate input (T1G), secondary oscillator output (SOSCO), OSC2 crystal/resonator connection, or FOSC/4 CLKOUT output.
21 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package QFN-20-EP(4x4)
Category Single Chip Microcomputer/Microcontroller
Pins 21

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -40 125 °C 371
Storage temperature -65 150 °C 371
Voltage on VDD pin with respect to VSS (PIC16F1704/8) VDD -0.3 6.5 V on VDD pin, PIC16F1704/8 371
Voltage on MCLR pin with respect to VSS -0.3 9 V on MCLR pin 371
Voltage on all other pins with respect to VSS -0.3 V on all other pins; printed maximum is VDD + 0.3V (not numeric) 371
Maximum current on VSS pin, Industrial 250 mA -40°C ≤ TA ≤ +85°C, Industrial 371
Maximum current on VSS pin, Extended 85 mA +85°C ≤ TA ≤ +125°C, Extended 371
Maximum current on VDD pin, Industrial 250 mA -40°C ≤ TA ≤ +85°C, Industrial 371
Maximum current on VDD pin, Extended 85 mA +85°C ≤ TA ≤ +125°C, Extended 371
Maximum current sunk by any I/O pin 50 mA sunk by any I/O pin 371
Maximum current sourced by any I/O pin 50 mA sourced by any I/O pin 371
Maximum current sourced by any op amp output pin 100 mA sourced by any op amp output pin 371
Clamp current IK 20 mA VPIN < 0 or VPIN > VDD 371
Operating ambient temperature range, Industrial TA -40 85 °C Industrial temperature 372
Operating ambient temperature range, Extended TA -40 125 °C Extended temperature 372
Operating supply voltage VDD (PIC16F1704/8) VDD 2.3 5.5 V FOSC ≤ 16 MHz (Parameter D001) 374
Operating supply voltage VDD (PIC16F1704/8) VDD 2.5 5.5 V FOSC ≤ 32 MHz (Note 2) (Parameter D001) 374
RAM data retention voltage (PIC16F1704/8) VDR 1.7 V Device in Sleep mode 374
Fixed Voltage Reference voltage, 1x gain VFVR -4 4 % 1x gain (1.024 nominal), VDD ≥ 2.5V, -40°C to 85°C 374
Fixed Voltage Reference voltage, 2x gain VFVR -4 4 % 2x gain (2.048 nominal), VDD ≥ 2.5V, -40°C to 85°C 374
Fixed Voltage Reference voltage, 4x gain VFVR -5 5 % 4x gain (4.096 nominal), VDD ≥ 4.75V, -40°C to 85°C 374
VDD rise rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms See Section 5.1 Power-On Reset (POR) for details 374
Supply current, LP oscillator 32 kHz, VDD 2.3V IDD 16 26 µA VDD 2.3V; FOSC = 32 kHz, LP Oscillator mode (Note 4, Note 5), -40°C ≤ TA ≤ +85°C 376
Supply current, LP oscillator 32 kHz, VDD 3.0V IDD 18 32 µA VDD 3.0V; FOSC = 32 kHz, LP Oscillator mode (Note 4, Note 5) 376
Supply current, LP oscillator 32 kHz, VDD 5.0V IDD 22 35 µA VDD 5.0V; FOSC = 32 kHz, LP Oscillator mode (Note 4, Note 5) 376
Supply current, XT oscillator 4 MHz, VDD 2.3V IDD 250 320 µA VDD 2.3V; FOSC = 4 MHz, XT Oscillator mode (Note 5) 376
Supply current, XT oscillator 4 MHz, VDD 3.0V IDD 320 420 µA VDD 3.0V; FOSC = 4 MHz, XT Oscillator mode (Note 5) 376
Supply current, XT oscillator 4 MHz, VDD 5.0V IDD 400 500 µA VDD 5.0V; FOSC = 4 MHz, XT Oscillator mode (Note 5) 376
Supply current, External Clock ECM 4 MHz, VDD 2.3V IDD 210 280 µA VDD 2.3V; FOSC = 4 MHz, External Clock (ECM), Medium-Power mode 376
Supply current, External Clock ECM 4 MHz, VDD 3.0V IDD 280 350 µA VDD 3.0V; FOSC = 4 MHz, External Clock (ECM), Medium-Power mode 376
Supply current, External Clock ECM 4 MHz, VDD 5.0V IDD 360 420 µA VDD 5.0V; FOSC = 4 MHz, External Clock (ECM), Medium-Power mode 376
Supply current, External Clock ECH 32 MHz, VDD 3.0V IDD 2 2.6 mA VDD 3.0V; FOSC = 32 MHz, External Clock (ECH), High-Power mode (Note 5) 376
Supply current, External Clock ECH 32 MHz, VDD 5.0V IDD 2.2 2.8 mA VDD 5.0V; FOSC = 32 MHz, External Clock (ECH), High-Power mode (Note 5) 376
Supply current, MFINTOSC 500 kHz, VDD 2.3V IDD 150 200 µA VDD 2.3V; FOSC = 500 kHz, MFINTOSC mode 376
Supply current, MFINTOSC 500 kHz, VDD 3.0V IDD 170 220 µA VDD 3.0V; FOSC = 500 kHz, MFINTOSC mode 376
Supply current, MFINTOSC 500 kHz, VDD 5.0V IDD 215 280 µA VDD 5.0V; FOSC = 500 kHz, MFINTOSC mode 376
Supply current, HFINTOSC 16 MHz, VDD 2.3V IDD 0.9 1.5 mA VDD 2.3V; FOSC = 16 MHz, HFINTOSC mode 376
Supply current, HFINTOSC 16 MHz, VDD 3.0V IDD 1.3 1.8 mA VDD 3.0V; FOSC = 16 MHz, HFINTOSC mode 376
Supply current, HFINTOSC 16 MHz, VDD 5.0V IDD 1.4 2 mA VDD 5.0V; FOSC = 16 MHz, HFINTOSC mode 376
Power-down current (Sleep), VDD 2.3V, Max +85°C IPD 0.3 3 µA VDD 2.3V; WDT, BOR, FVR, and SOSC disabled, all Peripherals Inactive, Low-Power Sleep mode; max column +85°C 378
Power-down current (Sleep), VDD 2.3V, Max +125°C IPD 0.3 10 µA VDD 2.3V; WDT, BOR, FVR, and SOSC disabled, all Peripherals Inactive, Low-Power Sleep mode; max column +125°C 378
Power-down current (Sleep), VDD 3.0V, Max +85°C IPD 0.4 4 µA VDD 3.0V; WDT, BOR, FVR, and SOSC disabled, all Peripherals Inactive, Low-Power Sleep mode; max column +85°C 378
Power-down current (Sleep), VDD 3.0V, Max +125°C IPD 0.4 12 µA VDD 3.0V; WDT, BOR, FVR, and SOSC disabled, all Peripherals Inactive, Low-Power Sleep mode; max column +125°C 378
Power-down current (Sleep), VDD 5.0V, Max +85°C IPD 0.5 6 µA VDD 5.0V; WDT, BOR, FVR, and SOSC disabled, all Peripherals Inactive, Low-Power Sleep mode; max column +85°C 378
Power-down current (Sleep), VDD 5.0V, Max +125°C IPD 0.5 15 µA VDD 5.0V; WDT, BOR, FVR, and SOSC disabled, all Peripherals Inactive, Low-Power Sleep mode; max column +125°C 378
Input low voltage, TTL buffer VIL 0.8 V I/O PORT with TTL buffer; 4.5V ≤ VDD ≤ 5.5V 380
Input high voltage, TTL buffer VIH 2 V I/O ports with TTL buffer; 4.5V ≤ VDD ≤ 5.5V 380
Input leakage current, I/O ports, 85°C IIL -125 5 125 nA VSS ≤ VPIN ≤ VDD, Pin at high-impedance, 85°C 380
Input leakage current, I/O ports, 125°C IIL -1000 5 1000 nA VSS ≤ VPIN ≤ VDD, Pin at high-impedance, 125°C 380
Input leakage current, MCLR IIL -200 5 200 nA VSS ≤ VPIN ≤ VDD, Pin at high-impedance, 85°C 380
Weak pull-up current IPUR 25 100 200 µA VDD = 3.3V, VPIN = VSS 380
Output low voltage, I/O ports VOL 0.6 V IOL = 8 mA, VDD = 5V 380
OSC2 pin capacitive loading COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 380
All I/O pins capacitive loading CIO 50 pF 380
Maximum junction temperature TJMAX 150 °C 382
Thermal resistance junction to ambient, 20-pin QFN 4x4mm JA 43 °C/W 20-pin QFN 4x4mm package 382
Thermal resistance junction to case, 20-pin QFN 4x4mm JC 5.3 °C/W 20-pin QFN 4x4mm package 382

CAD (KiCad official)

  • Symbol: PIC16F1708-E
  • Footprint: Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm
  • 3D model: QFN-20-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: pic16f1708-e-etched.step / pic16f1708-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f1708-e.step / pic16f1708-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (452 pp, sha256 b9654a949be792b6, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF