3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC16F1708-E
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · QFN-20-EP(4x4)
PIC16F1708-E from Microchip Tech, in a QFN-20-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RA3/MCLR/VPP | input | Input-only pin (TTL/ST) that can be used as general purpose input, as MCLR master clear with internal pull-up when MCLRE is enabled, or as VPP high-voltage programming input. |
| 2 | RC5 | bidirectional | General purpose I/O (TTL/ST input, CMOS output) that can also be used as CCP1 capture/compare/PWM1 and as OPA2IN+ and RX inputs per the PPS selection. |
| 3 | RC4 | bidirectional | General purpose I/O (TTL/ST input, CMOS output) that can also be used as the CLCIN1 configurable logic cell source input. |
| 4 | RC3 | bidirectional | General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 7 (AN7), comparator C1IN3-/C2IN3- inputs, OPA2OUT op amp 2 output, CCP2 capture/compare/PWM2, and CLCIN0 input. |
| 5 | RC6 | bidirectional | General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 8 (AN8), OPA2IN- op amp 2 inverting input, and SPI slave select input (SS). |
| 6 | RC7 | bidirectional | General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 9 (AN9) and OPA2IN+ op amp 2 non-inverting input. |
| 7 | RB7 | bidirectional | General purpose I/O (TTL/ST input, CMOS output) that can also be used as the USART synchronous clock (CK). |
| 8 | RB6 | bidirectional | General purpose I/O (TTL/ST input, CMOS output) that can also be used as SPI data input (SDI) and I2C clock (SCL, open-drain output). |
| 9 | RB5 | bidirectional | General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 11 (AN11), OPA1IN+ op amp 1 non-inverting input, and USART asynchronous input (RX). |
| 10 | RB4 | bidirectional | General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 10 (AN10), OPA1IN- op amp 1 inverting input, SPI clock (SCK), and I2C data (SDA, open-drain). |
| 11 | RC2 | bidirectional | General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 6 (AN6), comparator C1IN2-/C2IN2- inputs, and OPA1OUT op amp 1 output. |
| 12 | RC1 | bidirectional | General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 5 (AN5), comparator C1IN1-/C2IN1- inputs, and CLCIN2 configurable logic cell input. |
| 13 | RC0 | bidirectional | General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 4 (AN4) and comparator C2IN+ input. |
| 14 | RA2 | bidirectional | General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 2 (AN2), DAC1OUT2 output, zero-cross detection current source/sink (ZCD), Timer0 clock input (T0CKI), COG input (COGIN), and external interrupt (INT). |
| 15 | RA1 | bidirectional | General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 1 (AN1), positive ADC reference VREF+, comparator C1IN0-/C2IN0- inputs, and the ICSP serial programming clock (ICSPCLK). |
| 16 | RA0 | bidirectional | General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 0 (AN0), negative ADC reference VREF-, comparator C1IN+ input, DAC1OUT1 output, and ICSP data (ICSPDAT). |
| 17 | VSS | power_in | Ground reference for the device. |
| 18 | VDD | power_in | Positive supply; the PIC16F1704/8 operating range is 2.3V-5.5V (the 1.8V-3.6V range applies to PIC16LF1704/8). |
| 19 | RA5 | bidirectional | General purpose I/O (TTL/ST input, CMOS output) that can also be used as Timer1 clock input (T1CKI), secondary oscillator input (SOSCI), CLCIN3 input, OSC1 crystal/resonator connection, or CLKIN external clock input in EC mode. |
| 20 | RA4 | bidirectional | General purpose I/O (TTL/ST input, CMOS output) that can also be used as ADC channel 3 (AN3), Timer1 gate input (T1G), secondary oscillator output (SOSCO), OSC2 crystal/resonator connection, or FOSC/4 CLKOUT output. |
| 21 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | QFN-20-EP(4x4) |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -40 | 125 | °C | 371 | |||
| Storage temperature | -65 | 150 | °C | 371 | |||
| Voltage on VDD pin with respect to VSS (PIC16F1704/8) | VDD | -0.3 | 6.5 | V | on VDD pin, PIC16F1704/8 | 371 | |
| Voltage on MCLR pin with respect to VSS | -0.3 | 9 | V | on MCLR pin | 371 | ||
| Voltage on all other pins with respect to VSS | -0.3 | V | on all other pins; printed maximum is VDD + 0.3V (not numeric) | 371 | |||
| Maximum current on VSS pin, Industrial | 250 | mA | -40°C ≤ TA ≤ +85°C, Industrial | 371 | |||
| Maximum current on VSS pin, Extended | 85 | mA | +85°C ≤ TA ≤ +125°C, Extended | 371 | |||
| Maximum current on VDD pin, Industrial | 250 | mA | -40°C ≤ TA ≤ +85°C, Industrial | 371 | |||
| Maximum current on VDD pin, Extended | 85 | mA | +85°C ≤ TA ≤ +125°C, Extended | 371 | |||
| Maximum current sunk by any I/O pin | 50 | mA | sunk by any I/O pin | 371 | |||
| Maximum current sourced by any I/O pin | 50 | mA | sourced by any I/O pin | 371 | |||
| Maximum current sourced by any op amp output pin | 100 | mA | sourced by any op amp output pin | 371 | |||
| Clamp current | IK | 20 | mA | VPIN < 0 or VPIN > VDD | 371 | ||
| Operating ambient temperature range, Industrial | TA | -40 | 85 | °C | Industrial temperature | 372 | |
| Operating ambient temperature range, Extended | TA | -40 | 125 | °C | Extended temperature | 372 | |
| Operating supply voltage VDD (PIC16F1704/8) | VDD | 2.3 | 5.5 | V | FOSC ≤ 16 MHz (Parameter D001) | 374 | |
| Operating supply voltage VDD (PIC16F1704/8) | VDD | 2.5 | 5.5 | V | FOSC ≤ 32 MHz (Note 2) (Parameter D001) | 374 | |
| RAM data retention voltage (PIC16F1704/8) | VDR | 1.7 | V | Device in Sleep mode | 374 | ||
| Fixed Voltage Reference voltage, 1x gain | VFVR | -4 | 4 | % | 1x gain (1.024 nominal), VDD ≥ 2.5V, -40°C to 85°C | 374 | |
| Fixed Voltage Reference voltage, 2x gain | VFVR | -4 | 4 | % | 2x gain (2.048 nominal), VDD ≥ 2.5V, -40°C to 85°C | 374 | |
| Fixed Voltage Reference voltage, 4x gain | VFVR | -5 | 5 | % | 4x gain (4.096 nominal), VDD ≥ 4.75V, -40°C to 85°C | 374 | |
| VDD rise rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | See Section 5.1 Power-On Reset (POR) for details | 374 | ||
| Supply current, LP oscillator 32 kHz, VDD 2.3V | IDD | 16 | 26 | µA | VDD 2.3V; FOSC = 32 kHz, LP Oscillator mode (Note 4, Note 5), -40°C ≤ TA ≤ +85°C | 376 | |
| Supply current, LP oscillator 32 kHz, VDD 3.0V | IDD | 18 | 32 | µA | VDD 3.0V; FOSC = 32 kHz, LP Oscillator mode (Note 4, Note 5) | 376 | |
| Supply current, LP oscillator 32 kHz, VDD 5.0V | IDD | 22 | 35 | µA | VDD 5.0V; FOSC = 32 kHz, LP Oscillator mode (Note 4, Note 5) | 376 | |
| Supply current, XT oscillator 4 MHz, VDD 2.3V | IDD | 250 | 320 | µA | VDD 2.3V; FOSC = 4 MHz, XT Oscillator mode (Note 5) | 376 | |
| Supply current, XT oscillator 4 MHz, VDD 3.0V | IDD | 320 | 420 | µA | VDD 3.0V; FOSC = 4 MHz, XT Oscillator mode (Note 5) | 376 | |
| Supply current, XT oscillator 4 MHz, VDD 5.0V | IDD | 400 | 500 | µA | VDD 5.0V; FOSC = 4 MHz, XT Oscillator mode (Note 5) | 376 | |
| Supply current, External Clock ECM 4 MHz, VDD 2.3V | IDD | 210 | 280 | µA | VDD 2.3V; FOSC = 4 MHz, External Clock (ECM), Medium-Power mode | 376 | |
| Supply current, External Clock ECM 4 MHz, VDD 3.0V | IDD | 280 | 350 | µA | VDD 3.0V; FOSC = 4 MHz, External Clock (ECM), Medium-Power mode | 376 | |
| Supply current, External Clock ECM 4 MHz, VDD 5.0V | IDD | 360 | 420 | µA | VDD 5.0V; FOSC = 4 MHz, External Clock (ECM), Medium-Power mode | 376 | |
| Supply current, External Clock ECH 32 MHz, VDD 3.0V | IDD | 2 | 2.6 | mA | VDD 3.0V; FOSC = 32 MHz, External Clock (ECH), High-Power mode (Note 5) | 376 | |
| Supply current, External Clock ECH 32 MHz, VDD 5.0V | IDD | 2.2 | 2.8 | mA | VDD 5.0V; FOSC = 32 MHz, External Clock (ECH), High-Power mode (Note 5) | 376 | |
| Supply current, MFINTOSC 500 kHz, VDD 2.3V | IDD | 150 | 200 | µA | VDD 2.3V; FOSC = 500 kHz, MFINTOSC mode | 376 | |
| Supply current, MFINTOSC 500 kHz, VDD 3.0V | IDD | 170 | 220 | µA | VDD 3.0V; FOSC = 500 kHz, MFINTOSC mode | 376 | |
| Supply current, MFINTOSC 500 kHz, VDD 5.0V | IDD | 215 | 280 | µA | VDD 5.0V; FOSC = 500 kHz, MFINTOSC mode | 376 | |
| Supply current, HFINTOSC 16 MHz, VDD 2.3V | IDD | 0.9 | 1.5 | mA | VDD 2.3V; FOSC = 16 MHz, HFINTOSC mode | 376 | |
| Supply current, HFINTOSC 16 MHz, VDD 3.0V | IDD | 1.3 | 1.8 | mA | VDD 3.0V; FOSC = 16 MHz, HFINTOSC mode | 376 | |
| Supply current, HFINTOSC 16 MHz, VDD 5.0V | IDD | 1.4 | 2 | mA | VDD 5.0V; FOSC = 16 MHz, HFINTOSC mode | 376 | |
| Power-down current (Sleep), VDD 2.3V, Max +85°C | IPD | 0.3 | 3 | µA | VDD 2.3V; WDT, BOR, FVR, and SOSC disabled, all Peripherals Inactive, Low-Power Sleep mode; max column +85°C | 378 | |
| Power-down current (Sleep), VDD 2.3V, Max +125°C | IPD | 0.3 | 10 | µA | VDD 2.3V; WDT, BOR, FVR, and SOSC disabled, all Peripherals Inactive, Low-Power Sleep mode; max column +125°C | 378 | |
| Power-down current (Sleep), VDD 3.0V, Max +85°C | IPD | 0.4 | 4 | µA | VDD 3.0V; WDT, BOR, FVR, and SOSC disabled, all Peripherals Inactive, Low-Power Sleep mode; max column +85°C | 378 | |
| Power-down current (Sleep), VDD 3.0V, Max +125°C | IPD | 0.4 | 12 | µA | VDD 3.0V; WDT, BOR, FVR, and SOSC disabled, all Peripherals Inactive, Low-Power Sleep mode; max column +125°C | 378 | |
| Power-down current (Sleep), VDD 5.0V, Max +85°C | IPD | 0.5 | 6 | µA | VDD 5.0V; WDT, BOR, FVR, and SOSC disabled, all Peripherals Inactive, Low-Power Sleep mode; max column +85°C | 378 | |
| Power-down current (Sleep), VDD 5.0V, Max +125°C | IPD | 0.5 | 15 | µA | VDD 5.0V; WDT, BOR, FVR, and SOSC disabled, all Peripherals Inactive, Low-Power Sleep mode; max column +125°C | 378 | |
| Input low voltage, TTL buffer | VIL | 0.8 | V | I/O PORT with TTL buffer; 4.5V ≤ VDD ≤ 5.5V | 380 | ||
| Input high voltage, TTL buffer | VIH | 2 | V | I/O ports with TTL buffer; 4.5V ≤ VDD ≤ 5.5V | 380 | ||
| Input leakage current, I/O ports, 85°C | IIL | -125 | 5 | 125 | nA | VSS ≤ VPIN ≤ VDD, Pin at high-impedance, 85°C | 380 |
| Input leakage current, I/O ports, 125°C | IIL | -1000 | 5 | 1000 | nA | VSS ≤ VPIN ≤ VDD, Pin at high-impedance, 125°C | 380 |
| Input leakage current, MCLR | IIL | -200 | 5 | 200 | nA | VSS ≤ VPIN ≤ VDD, Pin at high-impedance, 85°C | 380 |
| Weak pull-up current | IPUR | 25 | 100 | 200 | µA | VDD = 3.3V, VPIN = VSS | 380 |
| Output low voltage, I/O ports | VOL | 0.6 | V | IOL = 8 mA, VDD = 5V | 380 | ||
| OSC2 pin capacitive loading | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 380 | ||
| All I/O pins capacitive loading | CIO | 50 | pF | 380 | |||
| Maximum junction temperature | TJMAX | 150 | °C | 382 | |||
| Thermal resistance junction to ambient, 20-pin QFN 4x4mm | JA | 43 | °C/W | 20-pin QFN 4x4mm package | 382 | ||
| Thermal resistance junction to case, 20-pin QFN 4x4mm | JC | 5.3 | °C/W | 20-pin QFN 4x4mm package | 382 |
CAD (KiCad official)
- Symbol:
PIC16F1708-E - Footprint:
Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm - 3D model: QFN-20-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
pic16f1708-e-etched.step/pic16f1708-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f1708-e.step/pic16f1708-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (452 pp, sha256
b9654a949be792b6, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).