Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16C774-I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · DIP-40-600mil

PIC16C774-I from Microchip Tech, in a DIP-40-600mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR/VPP input Master clear (reset) input or programming voltage input; this pin is an active low reset to the device.
2 RA0/AN0 bidirectional PORTA bidirectional I/O (TTL input); can also be analog input 0.
3 RA1/AN1 bidirectional PORTA bidirectional I/O (TTL input); can also be analog input 1.
4 RA2/AN2/VREF-/VRL bidirectional PORTA bidirectional I/O (TTL input); can also be analog input 2, negative analog reference voltage input, or internal voltage reference low.
5 RA3/AN3/VREF+/VRH bidirectional PORTA bidirectional I/O (TTL input); can also be analog input 3, positive analog reference voltage input, or internal voltage reference high.
6 RA4/T0CKI bidirectional PORTA bidirectional I/O (Schmitt Trigger input); can also be the clock input to the Timer0 timer/counter, and its output is open drain type.
7 RA5/AN4 bidirectional PORTA bidirectional I/O (TTL input); can also be analog input 4.
8 RE0/RD/AN5 bidirectional PORTE bidirectional I/O (ST/TTL input); can also be read control for the parallel slave port, or analog input 5.
9 RE1/WR/AN6 bidirectional PORTE bidirectional I/O (ST/TTL input); can also be write control for the parallel slave port, or analog input 6.
10 RE2/CS/AN7 bidirectional PORTE bidirectional I/O (ST/TTL input); can also be select control for the parallel slave port, or analog input 7.
11 AVDD power_in Positive supply for the A/D converter.
12 AVSS power_in Ground reference for the A/D converter.
13 OSC1/CLKIN input Oscillator crystal input or external clock source input.
14 OSC2/CLKOUT output Oscillator crystal output connecting to a crystal or resonator in crystal mode; in RC mode it outputs CLKOUT at 1/4 the OSC1 frequency, denoting the instruction cycle rate.
15 RC0/T1OSO/T1CKI bidirectional PORTC bidirectional I/O (Schmitt Trigger input); can also be the Timer1 oscillator output or a Timer1 clock input.
16 RC1/T1OSI/CCP2 bidirectional PORTC bidirectional I/O (Schmitt Trigger input); can also be the Timer1 oscillator input or Capture2 input/Compare2 output/PWM2 output.
17 RC2/CCP1 bidirectional PORTC bidirectional I/O (Schmitt Trigger input); can also be the Capture1 input/Compare1 output/PWM1 output.
18 RC3/SCK/SCL bidirectional PORTC bidirectional I/O (Schmitt Trigger input); can also be the synchronous serial clock input/output for both SPI and I2C modes.
19 RD0/PSP0 bidirectional PORTD bidirectional I/O or parallel slave port data bit 0 when interfacing to a microprocessor bus (ST/TTL input).
20 RD1/PSP1 bidirectional PORTD bidirectional I/O or parallel slave port data bit 1 when interfacing to a microprocessor bus (ST/TTL input).
21 RD2/PSP2 bidirectional PORTD bidirectional I/O or parallel slave port data bit 2 when interfacing to a microprocessor bus (ST/TTL input).
22 RD3/PSP3 bidirectional PORTD bidirectional I/O or parallel slave port data bit 3 when interfacing to a microprocessor bus (ST/TTL input).
23 RC4/SDI/SDA bidirectional PORTC bidirectional I/O (Schmitt Trigger input); can also be the SPI Data In (SPI mode) or data I/O (I2C mode).
24 RC5/SDO bidirectional PORTC bidirectional I/O (Schmitt Trigger input); can also be the SPI Data Out (SPI mode).
25 RC6/TX/CK bidirectional PORTC bidirectional I/O (Schmitt Trigger input); can also be the USART asynchronous transmit or synchronous clock.
26 RC7/RX/DT bidirectional PORTC bidirectional I/O (Schmitt Trigger input); can also be the USART asynchronous receive or synchronous data.
27 RD4/PSP4 bidirectional PORTD bidirectional I/O or parallel slave port data bit 4 when interfacing to a microprocessor bus (ST/TTL input).
28 RD5/PSP5 bidirectional PORTD bidirectional I/O or parallel slave port data bit 5 when interfacing to a microprocessor bus (ST/TTL input).
29 RD6/PSP6 bidirectional PORTD bidirectional I/O or parallel slave port data bit 6 when interfacing to a microprocessor bus (ST/TTL input).
30 RD7/PSP7 bidirectional PORTD bidirectional I/O or parallel slave port data bit 7 when interfacing to a microprocessor bus (ST/TTL input).
31 VSS power_in Ground reference for logic and I/O pins.
32 VDD power_in Positive supply for logic and I/O pins.
33 RB0/INT bidirectional PORTB bidirectional I/O (Schmitt Trigger input when multiplexed); can also be the external interrupt pin.
34 RB1/SS bidirectional PORTB bidirectional I/O (Schmitt Trigger input when multiplexed); can also be the SSP slave select.
35 RB2/AN8 bidirectional PORTB bidirectional I/O (TTL input); can also be analog input 8.
36 RB3/AN9/LVDIN bidirectional PORTB bidirectional I/O (TTL input); can also be analog input 9 or the input reference for low voltage detect.
37 RB4 bidirectional PORTB bidirectional I/O (TTL input) with interrupt-on-change function.
38 RB5 bidirectional PORTB bidirectional I/O (TTL input) with interrupt-on-change function.
39 RB6 bidirectional PORTB bidirectional I/O (TTL/Schmitt Trigger input in serial programming mode) with interrupt-on-change function; serves as the serial programming clock.
40 RB7 bidirectional PORTB bidirectional I/O (TTL/Schmitt Trigger input in serial programming mode) with interrupt-on-change function; serves as the serial programming data.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package DIP-40-600mil
Category Single Chip Microcomputer/Microcontroller
Pins 40

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating temperature (industrial -I range) TA -40 85 °C Industrial; commercial range is 0°C ≤ TA ≤ +70°C 152
Supply Voltage VDD 4 5.5 V XT, RC and LP osc configuration 152
Supply Voltage VDD 4.5 5.5 V HS osc configuration 152
VDD rise rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms See section on Power-on Reset for details. PWRT enabled 152
Supply Current (IDD) IDD 2.7 5 mA XT, RC osc configuration FOSC = 4 MHz, VDD = 5.5V 152
Supply Current (IDD) IDD 13.5 30 mA HS osc configuration FOSC = 20 MHz, VDD = 5.5V 152
Power-down Current (IPD) IPD 1.5 16 µA VDD = 4.0V, -0°C to +70°C 152
Power-down Current (IPD) IPD 1.5 19 µA VDD = 4.0V, -40°C to +85°C 152
Watchdog Timer module differential current ∆IWDT 6 20 µA VDD = 4.0V 152
Brown-out Reset module differential current ∆IBOR 200 µA 152
Input Low Voltage, I/O ports with TTL buffer VIL 0.8 V 4.5V ≤ VDD ≤ 5.5V 154
Input High Voltage, I/O ports with TTL buffer VIH 2 V 4.5V ≤ VDD ≤ 5.5V 154
PORTB weak pull-up current IPURB 50 250 400 µA VDD = 5V, VPIN = VSS 154
Input leakage current, I/O ports (digital) IIL -1 1 µA Vss ≤ VPIN ≤ VDD, Pin at hi-impedance 154
Input leakage current, I/O ports (RA0-RA3, RA5, RB2, RB3 analog) IIL -100 100 nA Vss ≤ VPIN ≤ VDD, Pin at hi-impedance 154
Input leakage current, MCLR and RA4/T0CKI -5 5 µA Vss ≤ VPIN ≤ VDD 154
Output Low Voltage, I/O ports VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C 154
Open-Drain High Voltage, RA4 pin VOD 8.5 V RA4 pin 155
Capacitive loading, all I/O pins and OSC2 (RC mode) CIO 50 pF 155
VREF output voltage VRL VRL 2 2.048 2.1 V VDD ≥ 2.5V 156
VREF output voltage VRH VRH 4 4.096 4.2 V VDD ≥ 4.5V 156
VREF output voltage drift temperature coefficient TCVOUT 15 50 ppm/°C Note 1 156
VREF line regulation ∆VOUT/∆VDD 50 µV/V 156
LVD Voltage LVV 2.5 2.58 2.66 V LVV = 0100 157
LVD Voltage LVV 2.7 2.78 2.86 V LVV = 0101 157
LVD Voltage LVV 2.8 2.89 2.98 V LVV = 0110 157
LVD Voltage LVV 3 3.1 3.2 V LVV = 0111 157
LVD Voltage LVV 3.3 3.41 3.52 V LVV = 1000 157
LVD Voltage LVV 3.5 3.61 3.72 V LVV = 1001 157
LVD Voltage LVV 3.6 3.72 3.84 V LVV = 1010 157
LVD Voltage LVV 3.8 3.92 4.04 V LVV = 1011 157
LVD Voltage LVV 4 4.13 4.26 V LVV = 1100 157
LVD Voltage LVV 4.2 4.33 4.46 V LVV = 1101 157
LVD Voltage LVV 4.5 4.64 4.78 V LVV = 1110 157
LVD supply current ∆ILVD 10 20 µA 157
LVD voltage drift temperature coefficient TCVOUT 15 50 ppm/°C 157
Low-voltage Detect hysteresis VLHYS 100 mV 157
BOR Voltage VBOR 2.5 2.58 2.66 V BORV1:0 = 11 158
BOR Voltage VBOR 2.7 2.78 2.86 V BORV1:0 = 10 158
BOR Voltage VBOR 4.2 4.33 4.46 V BORV1:0 = 01 158
BOR Voltage VBOR 4.5 4.64 4.78 V BORV1:0 = 00 158
BOR voltage drift temperature coefficient TCVOUT 15 50 ppm/°C 158
BOR hysteresis VBHYS 100 mV 158
BOR supply current ∆IBOR 10 20 µA 158
Ambient temperature under bias -55 125 °C 151
Storage temperature -65 150 °C 151
Voltage on VDD with respect to VSS VDD -0.3 7.5 V 151
Voltage on MCLR with respect to VSS 0 8.5 V Note 2 151
Voltage on RA4 with respect to VSS 0 8.5 V 151
Total power dissipation Pdis 1 W Note 1 151
Maximum current out of VSS pin 300 mA 151
Input clamp current IIK -20 20 mA VI < 0 or VI > VDD 151
Output clamp current IOK -20 20 mA VO < 0 or VO > VDD 151
Maximum output current sunk by any I/O pin 25 mA 151
Maximum output current sourced by any I/O pin 25 mA 151
Maximum current sunk by PORTA, PORTB, and PORTE (combined) 200 mA Note 3 151
Maximum current sourced by PORTA, PORTB, and PORTE (combined) 200 mA Note 3 151
Maximum current sunk by PORTC and PORTD (combined) 200 mA Note 3 151
Maximum current sourced by PORTC and PORTD (combined) 200 mA Note 3 151

CAD (KiCad official)

  • Symbol: PIC16C774-I
  • Footprint: Package_DIP:DIP-40_W15.24mm
  • 3D model: DIP-40_W15.24mm (KiCad packages3D, STEP)
  • 3D model files: pic16c774-i-etched.step / pic16c774-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16c774-i.step / pic16c774-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (201 pp, sha256 de0d4689f522861a, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF