main
Ray
pic16c72a-20-so: renamed from pic16c72a-20, the part it was built from (PIC16C72A-20/SO); family listed
5cfe66c
PIC16C72A-20/SO
Microchip Tech · Pre-ordered MCUs · SOIC-28-300mil
PIC16C72A-20 from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP | input | Master clear (reset) input or programming voltage input; an active low reset to the device. |
| 2 | RA0/AN0 | bidirectional | Bi-directional I/O port pin RA0, which can also be analog input 0. |
| 3 | RA1/AN1 | bidirectional | Bi-directional I/O port pin RA1, which can also be analog input 1. |
| 4 | RA2/AN2 | bidirectional | Bi-directional I/O port pin RA2, which can also be analog input 2. |
| 5 | RA3/AN3/VREF | bidirectional | Bi-directional I/O port pin RA3, which can also be analog input 3 or the analog reference voltage. |
| 6 | RA4/T0CKI | bidirectional | Bi-directional I/O port pin RA4, which can also be the clock input to the Timer0 module; its output is open drain type. |
| 7 | RA5/SS/AN4 | bidirectional | Bi-directional I/O port pin RA5, which can also be analog input 4 or the slave select for the synchronous serial port. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKIN | input | Oscillator crystal input or external clock source input. |
| 10 | OSC2/CLKOUT | output | Oscillator crystal output connecting to a crystal or resonator; in RC mode it outputs CLKOUT at 1/4 the frequency of OSC1. |
| 11 | RC0/T1OSO/T1CKI | bidirectional | Bi-directional I/O port pin RC0, which can also be the Timer1 oscillator output or the Timer1 clock input; Schmitt Trigger input. |
| 12 | RC1/T1OSI | bidirectional | Bi-directional I/O port pin RC1, which can also be the Timer1 oscillator input; Schmitt Trigger input. |
| 13 | RC2/CCP1 | bidirectional | Bi-directional I/O port pin RC2, which can also be Capture1 input, Compare1 output or PWM1 output; Schmitt Trigger input. |
| 14 | RC3/SCK/SCL | bidirectional | Bi-directional I/O port pin RC3, which can also be the synchronous serial clock input/output for both SPI and I2C modes; Schmitt Trigger input. |
| 15 | RC4/SDI/SDA | bidirectional | Bi-directional I/O port pin RC4, which can also be the SPI Data In (SPI mode) or data I/O (I2C mode); Schmitt Trigger input. |
| 16 | RC5/SDO | bidirectional | Bi-directional I/O port pin RC5, which can also be the SPI Data Out (SPI mode); Schmitt Trigger input. |
| 17 | RC6 | bidirectional | Bi-directional I/O port pin RC6; Schmitt Trigger input. |
| 18 | RC7 | bidirectional | Bi-directional I/O port pin RC7; Schmitt Trigger input. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT | bidirectional | Bi-directional I/O port pin RB0, which can also be the external interrupt pin; Schmitt Trigger input when configured as the external interrupt. |
| 22 | RB1 | bidirectional | Bi-directional I/O port pin RB1 with software programmable internal weak pull-up. |
| 23 | RB2 | bidirectional | Bi-directional I/O port pin RB2 with software programmable internal weak pull-up. |
| 24 | RB3 | bidirectional | Bi-directional I/O port pin RB3 with software programmable internal weak pull-up. |
| 25 | RB4 | bidirectional | Bi-directional I/O port pin RB4; interrupt on change pin. |
| 26 | RB5 | bidirectional | Bi-directional I/O port pin RB5; interrupt on change pin. |
| 27 | RB6 | bidirectional | Bi-directional I/O port pin RB6; interrupt on change pin and serial programming clock with Schmitt Trigger input. |
| 28 | RB7 | bidirectional | Bi-directional I/O port pin RB7; interrupt on change pin and serial programming data with Schmitt Trigger input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (XT, RC and LP oscillator modes) | VDD | 4 | 5.5 | V | XT, RC and LP osc mode | 84 | |
| Supply voltage (HS oscillator mode) | VDD | 4.5 | 5.5 | V | HS osc mode | 84 | |
| Supply voltage (BOR enabled) | VDD | 5.5 | V | BOR enabled (Note 7) | 84 | ||
| VDD rise rate for POR | SVDD | 0.05 | V/ms | PWRT enabled (PWRTE bit clear) | 84 | ||
| Brown-out Reset voltage trip point | VBOR | 3.65 | 4.35 | V | BODEN bit set | 84 | |
| Supply current | IDD | 2.7 | 10 | mA | XT, RC osc modes; FOSC = 4 MHz, VDD = 5.5V (Note 4) | 84 | |
| Supply current | IDD | 5 | 20 | mA | HS osc mode; FOSC = 20 MHz, VDD = 5.5V | 84 | |
| Power-down current | IPD | 10.5 | 42 | uA | VDD = 4.0V, WDT enabled, -40C to +85C | 84 | |
| Power-down current | IPD | 1.5 | 16 | uA | VDD = 4.0V, WDT disabled, 0C to +70C | 84 | |
| Power-down current | IPD | 1.5 | 19 | uA | VDD = 4.0V, WDT disabled, -40C to +85C | 84 | |
| Power-down current | IPD | 2.5 | 19 | uA | VDD = 4.0V, WDT disabled, -40C to +125C | 84 | |
| Module differential current, Watchdog Timer | IWDT | 6 | 20 | uA | WDTE BIT SET, VDD = 4.0V | 84 | |
| Module differential current, Brown-out Reset | IBOR | 200 | uA | BODEN bit set, VDD = 5.0V | 84 | ||
| Input low voltage, I/O ports with TTL buffer | VIL | 0.8 | V | 4.5V<=VDD<=5.5V | 86 | ||
| Input high voltage, I/O ports with TTL buffer | VIH | 2 | V | 4.5V<=VDD<=5.5V | 86 | ||
| Input leakage current, I/O ports | IIL | 1 | uA | Vss<=VPIN<=VDD, Pin at hi-impedance | 86 | ||
| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | uA | VDD = 5V, VPIN = VSS | 86 |
| Output low voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40C to +85C | 86 | ||
| Output low voltage, I/O ports | VOL | 0.6 | V | IOL = 7.0 mA, VDD = 4.5V, -40C to +125C | 87 | ||
| Output low voltage, OSC2/CLKOUT (RC osc mode) | VOL | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40C to +85C | 87 | ||
| Open-drain high voltage | VOD | 8.5 | V | RA4 pin | 87 | ||
| OSC2 pin capacitive loading | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1. | 87 | ||
| All I/O pins and OSC2 capacitive loading | CIO | 50 | pF | 87 | |||
| SCL, SDA capacitive bus loading in I2C mode | Cb | 400 | pF | SCL, SDA in I2C mode | 87 | ||
| External CLKIN frequency | Fosc | 20 | MHz | DC - 20 MHz HS osc mode (-20) | 90 | ||
| External CLKIN period | Tosc | 50 | ns | HS osc mode (-20) | 90 | ||
| Instruction cycle time | TCY | 200 | ns | TCY = 4/FOSC | 90 | ||
| External clock in (OSC1) high or low time | TosL,TosH | 15 | ns | HS oscillator | 90 | ||
| External clock in (OSC1) rise or fall time | TosR,TosF | 15 | ns | HS oscillator | 90 | ||
| Port in hold after OSC1 (I/O in hold time) | TosH2ioI | 100 | ns | PIC16CXX | 91 | ||
| Port output rise time | TioR | 10 | 40 | ns | PIC16CXX | 91 | |
| Port output fall time | TioF | 10 | 40 | ns | PIC16CXX | 91 | |
| A/D clock period (RC mode) | TAD | 2 | 4 | 6 | us | PIC16CXX A/D RC Mode | 102 |
| A/D conversion time | TCNV | 11 | 11 | TAD | Note 1 (not including S/H time) | 102 | |
| Switching from convert to sample time | Tswc | 1.5 | TAD | 102 | |||
| Reference voltage | VREF | 2.5 | V | 101 | |||
| Recommended impedance of analog voltage source | ZAIN | 10 | k | 101 | |||
| Ambient temperature range, commercial | TA | 0 | 70 | C | Commercial | 84 | |
| Ambient temperature range, industrial | TA | -40 | 85 | C | Industrial | 84 | |
| Ambient temperature range, extended | TA | -40 | 125 | C | Extended | 84 | |
| Ambient temperature under bias | TA | -55 | 125 | C | 81 | ||
| Storage temperature | Tstg | -65 | 150 | C | 81 | ||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 7.5 | V | 81 | ||
| Voltage on MCLR with respect to VSS | VMCLR | 0 | 13.25 | V | Note 2 | 81 | |
| Voltage on RA4 with respect to VSS | VRA4 | 0 | 8.5 | V | 81 | ||
| Voltage on any pin with respect to VSS (except VDD, MCLR, RA4) | -0.3 | V | Upper limit printed as VDD + 0.3V | 81 | |||
| Total power dissipation | Pdis | 1 | W | Note 1 | 81 | ||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 81 | ||
| Output clamp current | IOK | 20 | mA | VO < 0 or VO > VDD | 81 |
CAD (KiCad official)
- Symbol:
PIC16C72A-20 - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic16c72a-20-etched.step/pic16c72a-20-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16c72a-20.step/pic16c72a-20.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (122 pp, sha256
001eda69b9433079, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16C72A-20/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16C72A-20/SP
# PIC16C72A-20/SO
**Microchip Tech** · Pre-ordered MCUs · SOIC-28-300mil
PIC16C72A-20 from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP | input | Master clear (reset) input or programming voltage input; an active low reset to the device. |
| 2 | RA0/AN0 | bidirectional | Bi-directional I/O port pin RA0, which can also be analog input 0. |
| 3 | RA1/AN1 | bidirectional | Bi-directional I/O port pin RA1, which can also be analog input 1. |
| 4 | RA2/AN2 | bidirectional | Bi-directional I/O port pin RA2, which can also be analog input 2. |
| 5 | RA3/AN3/VREF | bidirectional | Bi-directional I/O port pin RA3, which can also be analog input 3 or the analog reference voltage. |
| 6 | RA4/T0CKI | bidirectional | Bi-directional I/O port pin RA4, which can also be the clock input to the Timer0 module; its output is open drain type. |
| 7 | RA5/SS/AN4 | bidirectional | Bi-directional I/O port pin RA5, which can also be analog input 4 or the slave select for the synchronous serial port. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKIN | input | Oscillator crystal input or external clock source input. |
| 10 | OSC2/CLKOUT | output | Oscillator crystal output connecting to a crystal or resonator; in RC mode it outputs CLKOUT at 1/4 the frequency of OSC1. |
| 11 | RC0/T1OSO/T1CKI | bidirectional | Bi-directional I/O port pin RC0, which can also be the Timer1 oscillator output or the Timer1 clock input; Schmitt Trigger input. |
| 12 | RC1/T1OSI | bidirectional | Bi-directional I/O port pin RC1, which can also be the Timer1 oscillator input; Schmitt Trigger input. |
| 13 | RC2/CCP1 | bidirectional | Bi-directional I/O port pin RC2, which can also be Capture1 input, Compare1 output or PWM1 output; Schmitt Trigger input. |
| 14 | RC3/SCK/SCL | bidirectional | Bi-directional I/O port pin RC3, which can also be the synchronous serial clock input/output for both SPI and I2C modes; Schmitt Trigger input. |
| 15 | RC4/SDI/SDA | bidirectional | Bi-directional I/O port pin RC4, which can also be the SPI Data In (SPI mode) or data I/O (I2C mode); Schmitt Trigger input. |
| 16 | RC5/SDO | bidirectional | Bi-directional I/O port pin RC5, which can also be the SPI Data Out (SPI mode); Schmitt Trigger input. |
| 17 | RC6 | bidirectional | Bi-directional I/O port pin RC6; Schmitt Trigger input. |
| 18 | RC7 | bidirectional | Bi-directional I/O port pin RC7; Schmitt Trigger input. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT | bidirectional | Bi-directional I/O port pin RB0, which can also be the external interrupt pin; Schmitt Trigger input when configured as the external interrupt. |
| 22 | RB1 | bidirectional | Bi-directional I/O port pin RB1 with software programmable internal weak pull-up. |
| 23 | RB2 | bidirectional | Bi-directional I/O port pin RB2 with software programmable internal weak pull-up. |
| 24 | RB3 | bidirectional | Bi-directional I/O port pin RB3 with software programmable internal weak pull-up. |
| 25 | RB4 | bidirectional | Bi-directional I/O port pin RB4; interrupt on change pin. |
| 26 | RB5 | bidirectional | Bi-directional I/O port pin RB5; interrupt on change pin. |
| 27 | RB6 | bidirectional | Bi-directional I/O port pin RB6; interrupt on change pin and serial programming clock with Schmitt Trigger input. |
| 28 | RB7 | bidirectional | Bi-directional I/O port pin RB7; interrupt on change pin and serial programming data with Schmitt Trigger input. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (XT, RC and LP oscillator modes) | VDD | 4 | | 5.5 | V | XT, RC and LP osc mode | 84 |
| Supply voltage (HS oscillator mode) | VDD | 4.5 | | 5.5 | V | HS osc mode | 84 |
| Supply voltage (BOR enabled) | VDD | | | 5.5 | V | BOR enabled (Note 7) | 84 |
| VDD rise rate for POR | SVDD | 0.05 | | | V/ms | PWRT enabled (PWRTE bit clear) | 84 |
| Brown-out Reset voltage trip point | VBOR | 3.65 | | 4.35 | V | BODEN bit set | 84 |
| Supply current | IDD | | 2.7 | 10 | mA | XT, RC osc modes; FOSC = 4 MHz, VDD = 5.5V (Note 4) | 84 |
| Supply current | IDD | | 5 | 20 | mA | HS osc mode; FOSC = 20 MHz, VDD = 5.5V | 84 |
| Power-down current | IPD | | 10.5 | 42 | uA | VDD = 4.0V, WDT enabled, -40C to +85C | 84 |
| Power-down current | IPD | | 1.5 | 16 | uA | VDD = 4.0V, WDT disabled, 0C to +70C | 84 |
| Power-down current | IPD | | 1.5 | 19 | uA | VDD = 4.0V, WDT disabled, -40C to +85C | 84 |
| Power-down current | IPD | | 2.5 | 19 | uA | VDD = 4.0V, WDT disabled, -40C to +125C | 84 |
| Module differential current, Watchdog Timer | IWDT | | 6 | 20 | uA | WDTE BIT SET, VDD = 4.0V | 84 |
| Module differential current, Brown-out Reset | IBOR | | | 200 | uA | BODEN bit set, VDD = 5.0V | 84 |
| Input low voltage, I/O ports with TTL buffer | VIL | | | 0.8 | V | 4.5V<=VDD<=5.5V | 86 |
| Input high voltage, I/O ports with TTL buffer | VIH | 2 | | | V | 4.5V<=VDD<=5.5V | 86 |
| Input leakage current, I/O ports | IIL | | | 1 | uA | Vss<=VPIN<=VDD, Pin at hi-impedance | 86 |
| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | uA | VDD = 5V, VPIN = VSS | 86 |
| Output low voltage, I/O ports | VOL | | | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40C to +85C | 86 |
| Output low voltage, I/O ports | VOL | | | 0.6 | V | IOL = 7.0 mA, VDD = 4.5V, -40C to +125C | 87 |
| Output low voltage, OSC2/CLKOUT (RC osc mode) | VOL | | | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40C to +85C | 87 |
| Open-drain high voltage | VOD | | | 8.5 | V | RA4 pin | 87 |
| OSC2 pin capacitive loading | COSC2 | | | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1. | 87 |
| All I/O pins and OSC2 capacitive loading | CIO | | | 50 | pF | | 87 |
| SCL, SDA capacitive bus loading in I2C mode | Cb | | | 400 | pF | SCL, SDA in I2C mode | 87 |
| External CLKIN frequency | Fosc | | | 20 | MHz | DC - 20 MHz HS osc mode (-20) | 90 |
| External CLKIN period | Tosc | 50 | | | ns | HS osc mode (-20) | 90 |
| Instruction cycle time | TCY | 200 | | | ns | TCY = 4/FOSC | 90 |
| External clock in (OSC1) high or low time | TosL,TosH | 15 | | | ns | HS oscillator | 90 |
| External clock in (OSC1) rise or fall time | TosR,TosF | | | 15 | ns | HS oscillator | 90 |
| Port in hold after OSC1 (I/O in hold time) | TosH2ioI | 100 | | | ns | PIC16CXX | 91 |
| Port output rise time | TioR | | 10 | 40 | ns | PIC16CXX | 91 |
| Port output fall time | TioF | | 10 | 40 | ns | PIC16CXX | 91 |
| A/D clock period (RC mode) | TAD | 2 | 4 | 6 | us | PIC16CXX A/D RC Mode | 102 |
| A/D conversion time | TCNV | 11 | | 11 | TAD | Note 1 (not including S/H time) | 102 |
| Switching from convert to sample time | Tswc | 1.5 | | | TAD | | 102 |
| Reference voltage | VREF | 2.5 | | | V | | 101 |
| Recommended impedance of analog voltage source | ZAIN | | | 10 | k | | 101 |
| Ambient temperature range, commercial | TA | 0 | | 70 | C | Commercial | 84 |
| Ambient temperature range, industrial | TA | -40 | | 85 | C | Industrial | 84 |
| Ambient temperature range, extended | TA | -40 | | 125 | C | Extended | 84 |
| Ambient temperature under bias | TA | -55 | | 125 | C | | 81 |
| Storage temperature | Tstg | -65 | | 150 | C | | 81 |
| Voltage on VDD with respect to VSS | VDD | -0.3 | | 7.5 | V | | 81 |
| Voltage on MCLR with respect to VSS | VMCLR | 0 | | 13.25 | V | Note 2 | 81 |
| Voltage on RA4 with respect to VSS | VRA4 | 0 | | 8.5 | V | | 81 |
| Voltage on any pin with respect to VSS (except VDD, MCLR, RA4) | | -0.3 | | | V | Upper limit printed as VDD + 0.3V | 81 |
| Total power dissipation | Pdis | | | 1 | W | Note 1 | 81 |
| Input clamp current | IIK | | | 20 | mA | VI < 0 or VI > VDD | 81 |
| Output clamp current | IOK | | | 20 | mA | VO < 0 or VO > VDD | 81 |
## CAD (KiCad official)
- Symbol: `PIC16C72A-20`
- Footprint: `Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm`
- 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files: `pic16c72a-20-etched.step` / `pic16c72a-20-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pic16c72a-20.step` / `pic16c72a-20.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Microchip Tech datasheet](docs/pic16c72a-20-datasheet.pdf) (122 pp, sha256 `001eda69b9433079`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pic16c72a-20-datasheet.pdf)
## Other parts in this family
This page is **PIC16C72A-20/SO**. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16C72A-20/SP