Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16C72A-20/SO

Microchip Tech · Pre-ordered MCUs · SOIC-28-300mil

PIC16C72A-20 from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR/VPP input Master clear (reset) input or programming voltage input; an active low reset to the device.
2 RA0/AN0 bidirectional Bi-directional I/O port pin RA0, which can also be analog input 0.
3 RA1/AN1 bidirectional Bi-directional I/O port pin RA1, which can also be analog input 1.
4 RA2/AN2 bidirectional Bi-directional I/O port pin RA2, which can also be analog input 2.
5 RA3/AN3/VREF bidirectional Bi-directional I/O port pin RA3, which can also be analog input 3 or the analog reference voltage.
6 RA4/T0CKI bidirectional Bi-directional I/O port pin RA4, which can also be the clock input to the Timer0 module; its output is open drain type.
7 RA5/SS/AN4 bidirectional Bi-directional I/O port pin RA5, which can also be analog input 4 or the slave select for the synchronous serial port.
8 VSS power_in Ground reference for logic and I/O pins.
9 OSC1/CLKIN input Oscillator crystal input or external clock source input.
10 OSC2/CLKOUT output Oscillator crystal output connecting to a crystal or resonator; in RC mode it outputs CLKOUT at 1/4 the frequency of OSC1.
11 RC0/T1OSO/T1CKI bidirectional Bi-directional I/O port pin RC0, which can also be the Timer1 oscillator output or the Timer1 clock input; Schmitt Trigger input.
12 RC1/T1OSI bidirectional Bi-directional I/O port pin RC1, which can also be the Timer1 oscillator input; Schmitt Trigger input.
13 RC2/CCP1 bidirectional Bi-directional I/O port pin RC2, which can also be Capture1 input, Compare1 output or PWM1 output; Schmitt Trigger input.
14 RC3/SCK/SCL bidirectional Bi-directional I/O port pin RC3, which can also be the synchronous serial clock input/output for both SPI and I2C modes; Schmitt Trigger input.
15 RC4/SDI/SDA bidirectional Bi-directional I/O port pin RC4, which can also be the SPI Data In (SPI mode) or data I/O (I2C mode); Schmitt Trigger input.
16 RC5/SDO bidirectional Bi-directional I/O port pin RC5, which can also be the SPI Data Out (SPI mode); Schmitt Trigger input.
17 RC6 bidirectional Bi-directional I/O port pin RC6; Schmitt Trigger input.
18 RC7 bidirectional Bi-directional I/O port pin RC7; Schmitt Trigger input.
19 VSS power_in Ground reference for logic and I/O pins.
20 VDD power_in Positive supply for logic and I/O pins.
21 RB0/INT bidirectional Bi-directional I/O port pin RB0, which can also be the external interrupt pin; Schmitt Trigger input when configured as the external interrupt.
22 RB1 bidirectional Bi-directional I/O port pin RB1 with software programmable internal weak pull-up.
23 RB2 bidirectional Bi-directional I/O port pin RB2 with software programmable internal weak pull-up.
24 RB3 bidirectional Bi-directional I/O port pin RB3 with software programmable internal weak pull-up.
25 RB4 bidirectional Bi-directional I/O port pin RB4; interrupt on change pin.
26 RB5 bidirectional Bi-directional I/O port pin RB5; interrupt on change pin.
27 RB6 bidirectional Bi-directional I/O port pin RB6; interrupt on change pin and serial programming clock with Schmitt Trigger input.
28 RB7 bidirectional Bi-directional I/O port pin RB7; interrupt on change pin and serial programming data with Schmitt Trigger input.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-28-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (XT, RC and LP oscillator modes) VDD 4 5.5 V XT, RC and LP osc mode 84
Supply voltage (HS oscillator mode) VDD 4.5 5.5 V HS osc mode 84
Supply voltage (BOR enabled) VDD 5.5 V BOR enabled (Note 7) 84
VDD rise rate for POR SVDD 0.05 V/ms PWRT enabled (PWRTE bit clear) 84
Brown-out Reset voltage trip point VBOR 3.65 4.35 V BODEN bit set 84
Supply current IDD 2.7 10 mA XT, RC osc modes; FOSC = 4 MHz, VDD = 5.5V (Note 4) 84
Supply current IDD 5 20 mA HS osc mode; FOSC = 20 MHz, VDD = 5.5V 84
Power-down current IPD 10.5 42 uA VDD = 4.0V, WDT enabled, -40C to +85C 84
Power-down current IPD 1.5 16 uA VDD = 4.0V, WDT disabled, 0C to +70C 84
Power-down current IPD 1.5 19 uA VDD = 4.0V, WDT disabled, -40C to +85C 84
Power-down current IPD 2.5 19 uA VDD = 4.0V, WDT disabled, -40C to +125C 84
Module differential current, Watchdog Timer IWDT 6 20 uA WDTE BIT SET, VDD = 4.0V 84
Module differential current, Brown-out Reset IBOR 200 uA BODEN bit set, VDD = 5.0V 84
Input low voltage, I/O ports with TTL buffer VIL 0.8 V 4.5V<=VDD<=5.5V 86
Input high voltage, I/O ports with TTL buffer VIH 2 V 4.5V<=VDD<=5.5V 86
Input leakage current, I/O ports IIL 1 uA Vss<=VPIN<=VDD, Pin at hi-impedance 86
PORTB weak pull-up current IPURB 50 250 400 uA VDD = 5V, VPIN = VSS 86
Output low voltage, I/O ports VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V, -40C to +85C 86
Output low voltage, I/O ports VOL 0.6 V IOL = 7.0 mA, VDD = 4.5V, -40C to +125C 87
Output low voltage, OSC2/CLKOUT (RC osc mode) VOL 0.6 V IOL = 1.6 mA, VDD = 4.5V, -40C to +85C 87
Open-drain high voltage VOD 8.5 V RA4 pin 87
OSC2 pin capacitive loading COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1. 87
All I/O pins and OSC2 capacitive loading CIO 50 pF 87
SCL, SDA capacitive bus loading in I2C mode Cb 400 pF SCL, SDA in I2C mode 87
External CLKIN frequency Fosc 20 MHz DC - 20 MHz HS osc mode (-20) 90
External CLKIN period Tosc 50 ns HS osc mode (-20) 90
Instruction cycle time TCY 200 ns TCY = 4/FOSC 90
External clock in (OSC1) high or low time TosL,TosH 15 ns HS oscillator 90
External clock in (OSC1) rise or fall time TosR,TosF 15 ns HS oscillator 90
Port in hold after OSC1 (I/O in hold time) TosH2ioI 100 ns PIC16CXX 91
Port output rise time TioR 10 40 ns PIC16CXX 91
Port output fall time TioF 10 40 ns PIC16CXX 91
A/D clock period (RC mode) TAD 2 4 6 us PIC16CXX A/D RC Mode 102
A/D conversion time TCNV 11 11 TAD Note 1 (not including S/H time) 102
Switching from convert to sample time Tswc 1.5 TAD 102
Reference voltage VREF 2.5 V 101
Recommended impedance of analog voltage source ZAIN 10 k 101
Ambient temperature range, commercial TA 0 70 C Commercial 84
Ambient temperature range, industrial TA -40 85 C Industrial 84
Ambient temperature range, extended TA -40 125 C Extended 84
Ambient temperature under bias TA -55 125 C 81
Storage temperature Tstg -65 150 C 81
Voltage on VDD with respect to VSS VDD -0.3 7.5 V 81
Voltage on MCLR with respect to VSS VMCLR 0 13.25 V Note 2 81
Voltage on RA4 with respect to VSS VRA4 0 8.5 V 81
Voltage on any pin with respect to VSS (except VDD, MCLR, RA4) -0.3 V Upper limit printed as VDD + 0.3V 81
Total power dissipation Pdis 1 W Note 1 81
Input clamp current IIK 20 mA VI < 0 or VI > VDD 81
Output clamp current IOK 20 mA VO < 0 or VO > VDD 81

CAD (KiCad official)

  • Symbol: PIC16C72A-20
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: pic16c72a-20-etched.step / pic16c72a-20-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16c72a-20.step / pic16c72a-20.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (122 pp, sha256 001eda69b9433079, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC16C72A-20/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC16C72A-20/SP