main
Ray pic16c72a-04-so: renamed from pic16c72a-04, the part it was built from (PIC16C72A-04/SO); family listed fc5cf07

PIC16C72A-04/SO

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil

PIC16C72A-04 from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR/VPP input Master clear (reset) input or programming voltage input; an active low reset to the device.
2 RA0/AN0 bidirectional PORTA bidirectional I/O pin with TTL input that can also serve as analog input 0.
3 RA1/AN1 bidirectional PORTA bidirectional I/O pin with TTL input that can also serve as analog input 1.
4 RA2/AN2 bidirectional PORTA bidirectional I/O pin with TTL input that can also serve as analog input 2.
5 RA3/AN3/VREF bidirectional PORTA bidirectional I/O pin with TTL input that can also serve as analog input 3 or analog reference voltage.
6 RA4/T0CKI bidirectional PORTA bidirectional I/O pin with Schmitt Trigger input and open drain output that can also serve as the Timer0 clock input.
7 RA5/SS/AN4 bidirectional PORTA bidirectional I/O pin with TTL input that can also serve as analog input 4 or the synchronous serial port slave select.
8 VSS power_in Ground reference for logic and I/O pins.
9 OSC1/CLKIN input Oscillator crystal input or external clock source input.
10 OSC2/CLKOUT output Oscillator crystal output; in RC mode it outputs CLKOUT at 1/4 the frequency of OSC1, denoting the instruction cycle rate.
11 RC0/T1OSO/T1CKI bidirectional PORTC bidirectional I/O pin with Schmitt Trigger input that can also serve as the Timer1 oscillator output or Timer1 clock input.
12 RC1/T1OSI bidirectional PORTC bidirectional I/O pin with Schmitt Trigger input that can also serve as the Timer1 oscillator input.
13 RC2/CCP1 bidirectional PORTC bidirectional I/O pin with Schmitt Trigger input that can also serve as Capture1 input, Compare1 output or PWM1 output.
14 RC3/SCK/SCL bidirectional PORTC bidirectional I/O pin with Schmitt Trigger input that serves as the synchronous serial clock input/output for both SPI and I2C modes.
15 RC4/SDI/SDA bidirectional PORTC bidirectional I/O pin with Schmitt Trigger input that serves as SPI data in (SPI mode) or data I/O (I2C mode).
16 RC5/SDO bidirectional PORTC bidirectional I/O pin with Schmitt Trigger input that serves as SPI data out (SPI mode).
17 RC6 bidirectional PORTC bidirectional I/O pin with Schmitt Trigger input.
18 RC7 bidirectional PORTC bidirectional I/O pin with Schmitt Trigger input.
19 VSS power_in Ground reference for logic and I/O pins.
20 VDD power_in Positive supply for logic and I/O pins.
21 RB0/INT bidirectional PORTB bidirectional I/O pin with TTL/Schmitt Trigger input that can also serve as the external interrupt pin, with Schmitt Trigger input when configured as interrupt.
22 RB1 bidirectional PORTB bidirectional I/O pin with TTL input and software-programmable internal weak pull-up.
23 RB2 bidirectional PORTB bidirectional I/O pin with TTL input and software-programmable internal weak pull-up.
24 RB3 bidirectional PORTB bidirectional I/O pin with TTL input and software-programmable internal weak pull-up.
25 RB4 bidirectional PORTB bidirectional I/O pin with TTL input that provides interrupt on change.
26 RB5 bidirectional PORTB bidirectional I/O pin with TTL input that provides interrupt on change.
27 RB6 bidirectional PORTB bidirectional I/O pin with TTL/Schmitt Trigger input that provides interrupt on change and serves as the serial programming clock.
28 RB7 bidirectional PORTB bidirectional I/O pin with TTL/Schmitt Trigger input that provides interrupt on change and serves as the serial programming data.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-28-300mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias -55 125 °C 81
Storage temperature -65 150 °C 81
Voltage on any pin with respect to VSS (except VDD, MCLR, RA4) -0.3 V Max is VDD + 0.3V 81
Voltage on VDD with respect to VSS VDD -0.3 7.5 V 81
Voltage on MCLR with respect to VSS MCLR 0 13.25 V Note 2 81
Voltage on RA4 with respect to VSS RA4 0 8.5 V 81
Total power dissipation Pdis 1 W Note 1 81
Input clamp current IIK 20 mA VI < 0 or VI > VDD 81
Output clamp current IOK 20 mA VO < 0 or VO > VDD 81
Operating temperature, commercial TA 0 70 °C commercial 84
Operating temperature, industrial TA -40 85 °C industrial 84
Operating temperature, extended TA -40 125 °C extended 84
Supply Voltage VDD 4 5.5 V XT, RC and LP osc mode 84
Supply Voltage VDD 4.5 5.5 V HS osc mode 84
Supply Voltage (BOR enabled) VBOR 5.5 V BOR enabled (Note 7) 84
VDD Rise Rate to ensure internal Power-on Reset signal SVDD 0.05 V/ms PWRT enabled (PWRTE bit clear) 84
Brown-out Reset voltage trip point VBOR 3.65 4.35 V BODEN bit set 84
Supply Current IDD 2.7 5 mA XT, RC osc modes 84
Supply Current IDD 10 20 mA HS osc mode 84
Power-down Current IPD 10.5 42 µA VDD = 4.0V, WDT enabled, -40C to +85C 84
Power-down Current IPD 1.5 16 µA VDD = 4.0V, WDT disabled, 0C to +70C 84
Power-down Current IPD 1.5 19 µA VDD = 4.0V, WDT disabled, -40C to +85C 84
Power-down Current IPD 2.5 19 µA VDD = 4.0V, WDT disabled, -40C to +125C 84
Module Differential Current, Watchdog Timer IWDT 6 20 µA WDTE BIT SET, VDD = 4.0V 84
Module Differential Current, Brown-out Reset IBOR 200 µA BODEN bit set, VDD = 5.0V 84
Input Low Voltage, I/O ports with TTL buffer VIL 0.8 V 4.5V <= VDD <= 5.5V 86
Input High Voltage, I/O ports with TTL buffer VIH 2 V 4.5V <= VDD <= 5.5V 86
Input Leakage Current, I/O ports IIL 1 µA Vss VPIN VDD, Pin at hi-impedance 86
Input Leakage Current, MCLR, RA4/T0CKI 5 µA Vss VPIN VDD 86
Input Leakage Current, OSC1 5 µA Vss VPIN VDD, XT, HS and LP osc modes 86
PORTB weak pull-up current IPURB 50 250 400 µA VDD = 5V, VPIN = VSS 86
Output Low Voltage, I/O ports VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V, -40C to +85C 86
Output Low Voltage, I/O ports VOL 0.6 V IOL = 7.0 mA, VDD = 4.5V, -40C to +125C 87
Output Low Voltage, OSC2/CLKOUT (RC osc mode) VOL 0.6 V IOL = 1.6 mA, VDD = 4.5V, -40C to +85C 87
Open-Drain High Voltage, RA4 pin VOD 8.5 V 87
Capacitive loading, OSC2 pin COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 87
Capacitive loading, all I/O pins and OSC2 (RC mode) CIO 50 pF 87
Capacitive loading, SCL, SDA in I2C mode Cb 400 pF 87
External CLKIN Frequency, RC and XT osc modes Fosc 4 MHz RC and XT osc modes 90
Instruction Cycle Time TCY 200 ns TCY = 4/FOSC 90
OSC1 to CLKOUT TosH2ckL 75 200 ns Note 1 91
OSC1 (Q1 cycle) to Port out valid TosH2ioV 50 150 ns 91
OSC1 (Q2 cycle) to Port input invalid (I/O in hold time) TosH2ioI 100 ns PIC16CXX 91
Port output rise time TioR 10 40 ns PIC16CXX 91
Port output fall time TioF 10 40 ns PIC16CXX 91
A/D converter absolute error (total) EABS -1 1 LSB VREF = VDD = 5.12V, VSS <= VAIN <= VREF 101
A/D integral linearity error EIL -1 1 LSB VREF = VDD = 5.12V, VSS <= VAIN <= VREF 101
Reference voltage VREF 2.5 V 2.5V 101
Recommended impedance of analog voltage source ZAIN 10 kOhm 101
A/D clock period TAD 1.6 µs PIC16CXX, TOSC based, VREF >= 3.0V 102
A/D clock period, RC mode TAD 2 4 6 µs PIC16CXX, A/D RC Mode 102
Conversion time (not including S/H time) TCNV 11 11 TAD Note 1 102
Acquisition time, amplifier settling time TACQ 5 µs Minimum time is amplifier settling time 102
Switching from convert to sample time Tswc 1.5 TAD 102

CAD (KiCad official)

  • Symbol: PIC16C72A-04
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
  • 3D model files: pic16c72a-04-etched.step / pic16c72a-04-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16c72a-04.step / pic16c72a-04.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (122 pp, sha256 001eda69b9433079, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC16C72A-04/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC16C72A-04/SP