Generated by kicad-footprint-generator · KiCad file format 20260206
PIC16C72A-04/SO
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
PIC16C72A-04 from Microchip Tech, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP | input | Master clear (reset) input or programming voltage input; an active low reset to the device. |
| 2 | RA0/AN0 | bidirectional | PORTA bidirectional I/O pin with TTL input that can also serve as analog input 0. |
| 3 | RA1/AN1 | bidirectional | PORTA bidirectional I/O pin with TTL input that can also serve as analog input 1. |
| 4 | RA2/AN2 | bidirectional | PORTA bidirectional I/O pin with TTL input that can also serve as analog input 2. |
| 5 | RA3/AN3/VREF | bidirectional | PORTA bidirectional I/O pin with TTL input that can also serve as analog input 3 or analog reference voltage. |
| 6 | RA4/T0CKI | bidirectional | PORTA bidirectional I/O pin with Schmitt Trigger input and open drain output that can also serve as the Timer0 clock input. |
| 7 | RA5/SS/AN4 | bidirectional | PORTA bidirectional I/O pin with TTL input that can also serve as analog input 4 or the synchronous serial port slave select. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | OSC1/CLKIN | input | Oscillator crystal input or external clock source input. |
| 10 | OSC2/CLKOUT | output | Oscillator crystal output; in RC mode it outputs CLKOUT at 1/4 the frequency of OSC1, denoting the instruction cycle rate. |
| 11 | RC0/T1OSO/T1CKI | bidirectional | PORTC bidirectional I/O pin with Schmitt Trigger input that can also serve as the Timer1 oscillator output or Timer1 clock input. |
| 12 | RC1/T1OSI | bidirectional | PORTC bidirectional I/O pin with Schmitt Trigger input that can also serve as the Timer1 oscillator input. |
| 13 | RC2/CCP1 | bidirectional | PORTC bidirectional I/O pin with Schmitt Trigger input that can also serve as Capture1 input, Compare1 output or PWM1 output. |
| 14 | RC3/SCK/SCL | bidirectional | PORTC bidirectional I/O pin with Schmitt Trigger input that serves as the synchronous serial clock input/output for both SPI and I2C modes. |
| 15 | RC4/SDI/SDA | bidirectional | PORTC bidirectional I/O pin with Schmitt Trigger input that serves as SPI data in (SPI mode) or data I/O (I2C mode). |
| 16 | RC5/SDO | bidirectional | PORTC bidirectional I/O pin with Schmitt Trigger input that serves as SPI data out (SPI mode). |
| 17 | RC6 | bidirectional | PORTC bidirectional I/O pin with Schmitt Trigger input. |
| 18 | RC7 | bidirectional | PORTC bidirectional I/O pin with Schmitt Trigger input. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0/INT | bidirectional | PORTB bidirectional I/O pin with TTL/Schmitt Trigger input that can also serve as the external interrupt pin, with Schmitt Trigger input when configured as interrupt. |
| 22 | RB1 | bidirectional | PORTB bidirectional I/O pin with TTL input and software-programmable internal weak pull-up. |
| 23 | RB2 | bidirectional | PORTB bidirectional I/O pin with TTL input and software-programmable internal weak pull-up. |
| 24 | RB3 | bidirectional | PORTB bidirectional I/O pin with TTL input and software-programmable internal weak pull-up. |
| 25 | RB4 | bidirectional | PORTB bidirectional I/O pin with TTL input that provides interrupt on change. |
| 26 | RB5 | bidirectional | PORTB bidirectional I/O pin with TTL input that provides interrupt on change. |
| 27 | RB6 | bidirectional | PORTB bidirectional I/O pin with TTL/Schmitt Trigger input that provides interrupt on change and serves as the serial programming clock. |
| 28 | RB7 | bidirectional | PORTB bidirectional I/O pin with TTL/Schmitt Trigger input that provides interrupt on change and serves as the serial programming data. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-28-300mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias | -55 | 125 | °C | 81 | |||
| Storage temperature | -65 | 150 | °C | 81 | |||
| Voltage on any pin with respect to VSS (except VDD, MCLR, RA4) | -0.3 | V | Max is VDD + 0.3V | 81 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 7.5 | V | 81 | ||
| Voltage on MCLR with respect to VSS | MCLR | 0 | 13.25 | V | Note 2 | 81 | |
| Voltage on RA4 with respect to VSS | RA4 | 0 | 8.5 | V | 81 | ||
| Total power dissipation | Pdis | 1 | W | Note 1 | 81 | ||
| Input clamp current | IIK | 20 | mA | VI < 0 or VI > VDD | 81 | ||
| Output clamp current | IOK | 20 | mA | VO < 0 or VO > VDD | 81 | ||
| Operating temperature, commercial | TA | 0 | 70 | °C | commercial | 84 | |
| Operating temperature, industrial | TA | -40 | 85 | °C | industrial | 84 | |
| Operating temperature, extended | TA | -40 | 125 | °C | extended | 84 | |
| Supply Voltage | VDD | 4 | 5.5 | V | XT, RC and LP osc mode | 84 | |
| Supply Voltage | VDD | 4.5 | 5.5 | V | HS osc mode | 84 | |
| Supply Voltage (BOR enabled) | VBOR | 5.5 | V | BOR enabled (Note 7) | 84 | ||
| VDD Rise Rate to ensure internal Power-on Reset signal | SVDD | 0.05 | V/ms | PWRT enabled (PWRTE bit clear) | 84 | ||
| Brown-out Reset voltage trip point | VBOR | 3.65 | 4.35 | V | BODEN bit set | 84 | |
| Supply Current | IDD | 2.7 | 5 | mA | XT, RC osc modes | 84 | |
| Supply Current | IDD | 10 | 20 | mA | HS osc mode | 84 | |
| Power-down Current | IPD | 10.5 | 42 | µA | VDD = 4.0V, WDT enabled, -40C to +85C | 84 | |
| Power-down Current | IPD | 1.5 | 16 | µA | VDD = 4.0V, WDT disabled, 0C to +70C | 84 | |
| Power-down Current | IPD | 1.5 | 19 | µA | VDD = 4.0V, WDT disabled, -40C to +85C | 84 | |
| Power-down Current | IPD | 2.5 | 19 | µA | VDD = 4.0V, WDT disabled, -40C to +125C | 84 | |
| Module Differential Current, Watchdog Timer | IWDT | 6 | 20 | µA | WDTE BIT SET, VDD = 4.0V | 84 | |
| Module Differential Current, Brown-out Reset | IBOR | 200 | µA | BODEN bit set, VDD = 5.0V | 84 | ||
| Input Low Voltage, I/O ports with TTL buffer | VIL | 0.8 | V | 4.5V <= VDD <= 5.5V | 86 | ||
| Input High Voltage, I/O ports with TTL buffer | VIH | 2 | V | 4.5V <= VDD <= 5.5V | 86 | ||
| Input Leakage Current, I/O ports | IIL | 1 | µA | Vss VPIN VDD, Pin at hi-impedance | 86 | ||
| Input Leakage Current, MCLR, RA4/T0CKI | 5 | µA | Vss VPIN VDD | 86 | |||
| Input Leakage Current, OSC1 | 5 | µA | Vss VPIN VDD, XT, HS and LP osc modes | 86 | |||
| PORTB weak pull-up current | IPURB | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 86 |
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40C to +85C | 86 | ||
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 7.0 mA, VDD = 4.5V, -40C to +125C | 87 | ||
| Output Low Voltage, OSC2/CLKOUT (RC osc mode) | VOL | 0.6 | V | IOL = 1.6 mA, VDD = 4.5V, -40C to +85C | 87 | ||
| Open-Drain High Voltage, RA4 pin | VOD | 8.5 | V | 87 | |||
| Capacitive loading, OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 | 87 | ||
| Capacitive loading, all I/O pins and OSC2 (RC mode) | CIO | 50 | pF | 87 | |||
| Capacitive loading, SCL, SDA in I2C mode | Cb | 400 | pF | 87 | |||
| External CLKIN Frequency, RC and XT osc modes | Fosc | 4 | MHz | RC and XT osc modes | 90 | ||
| Instruction Cycle Time | TCY | 200 | ns | TCY = 4/FOSC | 90 | ||
| OSC1 to CLKOUT | TosH2ckL | 75 | 200 | ns | Note 1 | 91 | |
| OSC1 (Q1 cycle) to Port out valid | TosH2ioV | 50 | 150 | ns | 91 | ||
| OSC1 (Q2 cycle) to Port input invalid (I/O in hold time) | TosH2ioI | 100 | ns | PIC16CXX | 91 | ||
| Port output rise time | TioR | 10 | 40 | ns | PIC16CXX | 91 | |
| Port output fall time | TioF | 10 | 40 | ns | PIC16CXX | 91 | |
| A/D converter absolute error (total) | EABS | -1 | 1 | LSB | VREF = VDD = 5.12V, VSS <= VAIN <= VREF | 101 | |
| A/D integral linearity error | EIL | -1 | 1 | LSB | VREF = VDD = 5.12V, VSS <= VAIN <= VREF | 101 | |
| Reference voltage | VREF | 2.5 | V | 2.5V | 101 | ||
| Recommended impedance of analog voltage source | ZAIN | 10 | kOhm | 101 | |||
| A/D clock period | TAD | 1.6 | µs | PIC16CXX, TOSC based, VREF >= 3.0V | 102 | ||
| A/D clock period, RC mode | TAD | 2 | 4 | 6 | µs | PIC16CXX, A/D RC Mode | 102 |
| Conversion time (not including S/H time) | TCNV | 11 | 11 | TAD | Note 1 | 102 | |
| Acquisition time, amplifier settling time | TACQ | 5 | µs | Minimum time is amplifier settling time | 102 | ||
| Switching from convert to sample time | Tswc | 1.5 | TAD | 102 |
CAD (KiCad official)
- Symbol:
PIC16C72A-04 - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil (KiCad packages3D, STEP)
- 3D model files:
pic16c72a-04-etched.step/pic16c72a-04-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16c72a-04.step/pic16c72a-04.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (122 pp, sha256
001eda69b9433079, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16C72A-04/SO. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16C72A-04/SP