Generated by kicad-footprint-generator · KiCad file format 20260206
PIC12CE519-04I
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-8
PIC12CE519-04I from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply for logic and I/O pins. |
| 2 | GP5/OSC1/CLKIN | bidirectional | Bidirectional I/O port, oscillator crystal input or external clock source input (GPIO in Internal RC mode only, OSC1 in all other oscillator modes); TTL input when GPIO, Schmitt Trigger input in external RC oscillator mode. |
| 3 | GP4/OSC2 | bidirectional | Bidirectional I/O port with TTL input, or oscillator crystal output connecting to crystal or resonator in XT and LP modes only (GPIO in other modes). |
| 4 | GP3/MCLR/VPP | input | Input port, active-low master clear (reset) input or programming voltage input; voltage on MCLR/VPP must not exceed VDD during normal operation or the device enters programming mode, weak pull-up always on when configured as MCLR, with software-programmable pull-up and wake-up from SLEEP on pin change. |
| 5 | GP2/T0CKI | bidirectional | Bidirectional I/O port with Schmitt Trigger input that can be configured as T0CKI. |
| 6 | GP1 | bidirectional | Bidirectional I/O port and serial programming clock with TTL/ST input (Schmitt Trigger in serial programming mode), software-programmable weak pull-up and wake-up from SLEEP on pin change. |
| 7 | GP0 | bidirectional | Bidirectional I/O port and serial programming data with TTL/ST input (Schmitt Trigger in serial programming mode), software-programmable weak pull-up and wake-up from SLEEP on pin change. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8 |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 3 | 5.5 | V | FOSC = DC to 4 MHz (Commercial/Industrial, Extended) | 80 | |
| Operating Temperature (industrial) | TA | -40 | 85 | °C | industrial | 80 | |
| Ambient Temperature under bias | -40 | 125 | °C | 79 | |||
| Storage Temperature | -65 | 150 | °C | 79 | |||
| Voltage on VDD with respect to VSS | VDD | 0 | 7 | V | 79 | ||
| Voltage on MCLR with respect to VSS | 0 | 14 | V | 79 | |||
| Voltage on all other pins with respect to VSS | -0.3 | V | max printed as (VDD + 0.3 V) | 79 | |||
| Max. Current into VDD pin | 150 | mA | 79 | ||||
| Input Clamp Current | IIK | -20 | 20 | mA | VI < 0 or VI > VDD | 79 | |
| Output Clamp Current | IOK | -20 | 20 | mA | VO < 0 or VO > VDD | 79 | |
| Max. Output Current sunk by any I/O pin | 25 | mA | 79 | ||||
| Max. Output Current sourced by any I/O pin | 25 | mA | 79 | ||||
| RAM Data Retention Voltage | VDR | 1.5 | V | Device in SLEEP mode | 80 | ||
| VDD Rise Rate to ensure Power-on Reset | SVDD | 0.05 | V/ms | See section on Power-on Reset for details | 80 | ||
| Supply Current, XT and EXTRC | IDD | 0.8 | 1.4 | mA | FOSC = 4 MHz, VDD = 5.5V | 80 | |
| Supply Current, INTRC | IDD | 0.8 | 1.4 | mA | FOSC = 4 MHz, VDD = 5.5V | 80 | |
| Supply Current, LP Industrial | IDD | 19 | 35 | µA | FOSC = 32 kHz, VDD = 3.0V, WDT disabled | 80 | |
| Power-Down Current, Industrial | IPD | 0.25 | 5 | µA | VDD = 3.0V, Industrial WDT disabled | 80 | |
| WDT Power-Down Current, Industrial | ΔIWDT | 2.2 | 6 | µA | VDD = 3.0V, Industrial | 80 | |
| Supply Current during read/write to EEPROM peripheral | ΔIEE | 0.1 | 0.2 | mA | FOSC = 4 MHz, Vdd = 5.5V, SCL = 400kHz | 80 | |
| Input Low Voltage, TTL buffer | VIL | 0.8 | V | For 4.5V ≤ VDD ≤ 5.5V | 82 | ||
| Input High Voltage, TTL buffer | VIH | 2 | V | otherwise (D040A) | 82 | ||
| GPIO weak pull-up current | IPUR | 30 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 82 |
| MCLR pull-up current | 30 | µA | VDD = 5V, VPIN = VSS | 82 | |||
| Input Leakage Current, I/O ports | IIL | 1 | µA | Vss ≤ VPIN ≤ VDD, Pin at hi-impedance | 82 | ||
| Input Leakage Current, T0CKI | 5 | µA | Vss ≤ VPIN ≤ VDD | 82 | |||
| Input Leakage Current, OSC1 | 5 | µA | Vss ≤ VPIN ≤ VDD, XT and LP osc configuration | 82 | |||
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C | 82 | ||
| OSC2 pin capacitive loading | COSC2 | 15 | pF | In XT and LP modes when external clock is used to drive OSC1. | 82 | ||
| All I/O pins capacitive loading | CIO | 50 | pF | 82 | |||
| External CLKIN Frequency, XT | FOSC | 0 | 4 | MHz | XT osc mode (min printed DC) | 86 | |
| External CLKIN Frequency, LP | FOSC | 0 | 200 | kHz | LP osc mode (min printed DC) | 86 | |
| Oscillator Frequency, EXTRC | FOSC | 0 | 4 | MHz | EXTRC osc mode (min printed DC) | 86 | |
| Oscillator Frequency, XT | FOSC | 0.1 | 4 | MHz | XT osc mode | 86 | |
| Clock in (OSC1) Low or High Time, XT | TosL, TosH | 50 | ns | XT oscillator | 86 | ||
| Clock in (OSC1) Rise or Fall Time, XT | TosR, TosF | 25 | ns | XT oscillator | 86 | ||
| Internal Calibrated RC Frequency | 3.65 | 4 | 4.28 | MHz | VDD = 5.0V | 87 | |
| OSC1↑ to Port out valid | TosH2ioV | 100 | ns | 88 | |||
| Port output rise time | TioR | 10 | 25 | ns | 88 | ||
| Port output fall time | TioF | 10 | 25 | ns | 88 | ||
| MCLR Pulse Width (low) | TmcL | 2000 | ns | VDD = 5 V | 89 | ||
| Watchdog Timer Time-out Period (No Prescaler) | Twdt | 9 | 18 | 30 | ms | VDD = 5 V (Commercial) | 89 |
| Device Reset Timer Period | TDRT | 9 | 18 | 30 | ms | VDD = 5 V (Commercial) | 89 |
| I/O Hi-impedance from MCLR Low | TioZ | 2000 | ns | 89 | |||
| EEPROM Clock frequency | FCLK | 400 | kHz | 4.5V ≤ Vcc ≤ 5.5V | 91 | ||
| EEPROM Clock frequency | FCLK | 100 | kHz | 3.0V ≤ Vcc ≤ 4.5V | 91 | ||
| EEPROM Write cycle time | TWC | 4 | ms | 91 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Package Type: K04-057 8-Lead Plastic Small Outline (SN), Narrow, 150 mil Dimension Limits MIN | 101 |
CAD (KiCad official)
- Symbol:
PIC12CE519-04I - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
pic12ce519-04i-etched.step/pic12ce519-04i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic12ce519-04i.step/pic12ce519-04i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (113 pp, sha256
038ccfcc9e0e8996, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).