Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC12CE519-04I

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-8

PIC12CE519-04I from Microchip Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply for logic and I/O pins.
2 GP5/OSC1/CLKIN bidirectional Bidirectional I/O port, oscillator crystal input or external clock source input (GPIO in Internal RC mode only, OSC1 in all other oscillator modes); TTL input when GPIO, Schmitt Trigger input in external RC oscillator mode.
3 GP4/OSC2 bidirectional Bidirectional I/O port with TTL input, or oscillator crystal output connecting to crystal or resonator in XT and LP modes only (GPIO in other modes).
4 GP3/MCLR/VPP input Input port, active-low master clear (reset) input or programming voltage input; voltage on MCLR/VPP must not exceed VDD during normal operation or the device enters programming mode, weak pull-up always on when configured as MCLR, with software-programmable pull-up and wake-up from SLEEP on pin change.
5 GP2/T0CKI bidirectional Bidirectional I/O port with Schmitt Trigger input that can be configured as T0CKI.
6 GP1 bidirectional Bidirectional I/O port and serial programming clock with TTL/ST input (Schmitt Trigger in serial programming mode), software-programmable weak pull-up and wake-up from SLEEP on pin change.
7 GP0 bidirectional Bidirectional I/O port and serial programming data with TTL/ST input (Schmitt Trigger in serial programming mode), software-programmable weak pull-up and wake-up from SLEEP on pin change.
8 VSS power_in Ground reference for logic and I/O pins.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8
Category Single Chip Microcomputer/Microcontroller
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 3 5.5 V FOSC = DC to 4 MHz (Commercial/Industrial, Extended) 80
Operating Temperature (industrial) TA -40 85 °C industrial 80
Ambient Temperature under bias -40 125 °C 79
Storage Temperature -65 150 °C 79
Voltage on VDD with respect to VSS VDD 0 7 V 79
Voltage on MCLR with respect to VSS 0 14 V 79
Voltage on all other pins with respect to VSS -0.3 V max printed as (VDD + 0.3 V) 79
Max. Current into VDD pin 150 mA 79
Input Clamp Current IIK -20 20 mA VI < 0 or VI > VDD 79
Output Clamp Current IOK -20 20 mA VO < 0 or VO > VDD 79
Max. Output Current sunk by any I/O pin 25 mA 79
Max. Output Current sourced by any I/O pin 25 mA 79
RAM Data Retention Voltage VDR 1.5 V Device in SLEEP mode 80
VDD Rise Rate to ensure Power-on Reset SVDD 0.05 V/ms See section on Power-on Reset for details 80
Supply Current, XT and EXTRC IDD 0.8 1.4 mA FOSC = 4 MHz, VDD = 5.5V 80
Supply Current, INTRC IDD 0.8 1.4 mA FOSC = 4 MHz, VDD = 5.5V 80
Supply Current, LP Industrial IDD 19 35 µA FOSC = 32 kHz, VDD = 3.0V, WDT disabled 80
Power-Down Current, Industrial IPD 0.25 5 µA VDD = 3.0V, Industrial WDT disabled 80
WDT Power-Down Current, Industrial ΔIWDT 2.2 6 µA VDD = 3.0V, Industrial 80
Supply Current during read/write to EEPROM peripheral ΔIEE 0.1 0.2 mA FOSC = 4 MHz, Vdd = 5.5V, SCL = 400kHz 80
Input Low Voltage, TTL buffer VIL 0.8 V For 4.5V ≤ VDD ≤ 5.5V 82
Input High Voltage, TTL buffer VIH 2 V otherwise (D040A) 82
GPIO weak pull-up current IPUR 30 250 400 µA VDD = 5V, VPIN = VSS 82
MCLR pull-up current 30 µA VDD = 5V, VPIN = VSS 82
Input Leakage Current, I/O ports IIL 1 µA Vss ≤ VPIN ≤ VDD, Pin at hi-impedance 82
Input Leakage Current, T0CKI 5 µA Vss ≤ VPIN ≤ VDD 82
Input Leakage Current, OSC1 5 µA Vss ≤ VPIN ≤ VDD, XT and LP osc configuration 82
Output Low Voltage, I/O ports VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C 82
OSC2 pin capacitive loading COSC2 15 pF In XT and LP modes when external clock is used to drive OSC1. 82
All I/O pins capacitive loading CIO 50 pF 82
External CLKIN Frequency, XT FOSC 0 4 MHz XT osc mode (min printed DC) 86
External CLKIN Frequency, LP FOSC 0 200 kHz LP osc mode (min printed DC) 86
Oscillator Frequency, EXTRC FOSC 0 4 MHz EXTRC osc mode (min printed DC) 86
Oscillator Frequency, XT FOSC 0.1 4 MHz XT osc mode 86
Clock in (OSC1) Low or High Time, XT TosL, TosH 50 ns XT oscillator 86
Clock in (OSC1) Rise or Fall Time, XT TosR, TosF 25 ns XT oscillator 86
Internal Calibrated RC Frequency 3.65 4 4.28 MHz VDD = 5.0V 87
OSC1↑ to Port out valid TosH2ioV 100 ns 88
Port output rise time TioR 10 25 ns 88
Port output fall time TioF 10 25 ns 88
MCLR Pulse Width (low) TmcL 2000 ns VDD = 5 V 89
Watchdog Timer Time-out Period (No Prescaler) Twdt 9 18 30 ms VDD = 5 V (Commercial) 89
Device Reset Timer Period TDRT 9 18 30 ms VDD = 5 V (Commercial) 89
I/O Hi-impedance from MCLR Low TioZ 2000 ns 89
EEPROM Clock frequency FCLK 400 kHz 4.5V ≤ Vcc ≤ 5.5V 91
EEPROM Clock frequency FCLK 100 kHz 3.0V ≤ Vcc ≤ 4.5V 91
EEPROM Write cycle time TWC 4 ms 91

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin Package Type: K04-057 8-Lead Plastic Small Outline (SN), Narrow, 150 mil Dimension Limits MIN 101

CAD (KiCad official)

  • Symbol: PIC12CE519-04I
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: pic12ce519-04i-etched.step / pic12ce519-04i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic12ce519-04i.step / pic12ce519-04i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (113 pp, sha256 038ccfcc9e0e8996, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF