main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers pi90lv02atex: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
pi90lv02atex-etched.glb Publish 0.1.0 · Ray
pi90lv02atex-etched.step pi90lv02atex: factory component page (tier=mfr) · Ray
pi90lv02atex-hero.glb pi90lv02atex: hero GLB from the etched model (keeps the MPN mark) · Ray
pi90lv02atex-hero.overlay.json Publish 0.1.0 · Ray
pi90lv02atex.glb Publish 0.1.0 · Ray
pi90lv02atex.kicad_mod Publish 0.1.0 · Ray
pi90lv02atex.kicad_sym Publish 0.1.0 · Ray
pi90lv02atex.lbr Publish 0.1.0 · Ray
pi90lv02atex.step Publish 0.1.0 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

PI90LV02ATEX

Diodes Incorporated · LVDS ICs · SOT-23-5

PI90LV02ATEX from Diodes Incorporated, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Supply voltage pin, specified at 3.0 V to 3.6 V with 3.3 V nominal and absolute maximum of -0.5 V to 4 V.
2 GND power_in Ground reference pin; all voltages in the datasheet are referenced to this terminal.
3 A input Non-inverting differential LVDS input (VID = VA - VB); input voltage must stay within the common-mode range and absolute maximum of VCC +0.5 V.
4 B input Inverting differential LVDS input; ROUT goes low when VID = VA - VB is at or below -50 mV.
5 ROUT output CMOS receiver output with VOH of 2.4 V minimum and VOL of 0.4 V maximum at 8 mA; output is high impedance when VCC is below 1.5 V.

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package SOT-23-5
Category Interface
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VCC 3 3.3 3.6 V 3
Magnitude of differential input voltage /VID/ 0.1 0.6 V 3
Operating free-air temperature TA -40 105 °C 3
Supply Voltage Range VCC -0.5 4 V 3
Voltage Range (A, B, or ROUT) -0.5 V max VCC+0.5V 3
ESD Rating (HBM) 2 kV HBM, 1.5KΩ, 100pF 3
Storage Temperature Range -65 150 °C 3
Operating Temperature -40 105 °C 3
Power Rating 385 mW TA = 25°C, 5-Pin SOT-23 (T) 3
Derating Factor Above TA = 25°C 3.1 mW/°C 5-Pin SOT-23 (T), above TA = 25°C 3
Power Rating at TA = 85°C 200 mW TA = 85°C, 5-Pin SOT-23 (T) 3
Positive-going differential input voltage threshold VITH+ 100 mV See Figure 2, & Table 1 4
Negative-going differential input voltage threshold VITH- -100 mV See Figure 2, & Table 1 4
High-level output voltage VOH 2.4 3 V IOH = -8mA 4
Low-level output voltage VOL 0.25 0.4 V IOL = 8mA 4
Supply current ICC 4 7 mA No load, Steady state 4
Input current (A or B inputs) II -20 20 µA VI = 0V 4
Input current (A or B inputs) II -1.2 µA VI = 2.4V or VCC -0.8 4
High-level input current (IIA, IIB) IID -2 2 µA VIA = 0V, VIB = 0.1V 4
Power-off input current (A or B inputs) II(OFF) 20 µA VCC = 0V, VI = 2.4V 4
Propagation delay time, low-to-high level output tPLH 1.3 2.1 3.2 ns CL = 5pF, See Figure 3 5
Propagation delay time, high-to-low level output tPHL 1.3 2 3.2 ns 5
Output signal rise time tr 0.7 1.4 ns 5
Output signal fall time tf 0.7 1.4 ns 5
Pulse skew (/tPHL - tPLH/) tsk(p) 0.1 0.5 ns 5

CAD (KiCad official)

  • Symbol: PI90LV02ATEX
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: pi90lv02atex-etched.step / pi90lv02atex-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pi90lv02atex.step / pi90lv02atex.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (11 pp, sha256 fb9823bfad524f2b, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF