3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPI90LV02ATEX
Diodes Incorporated · LVDS ICs · SOT-23-5
PI90LV02ATEX from Diodes Incorporated, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage pin, specified at 3.0 V to 3.6 V with 3.3 V nominal and absolute maximum of -0.5 V to 4 V. |
| 2 | GND | power_in | Ground reference pin; all voltages in the datasheet are referenced to this terminal. |
| 3 | A | input | Non-inverting differential LVDS input (VID = VA - VB); input voltage must stay within the common-mode range and absolute maximum of VCC +0.5 V. |
| 4 | B | input | Inverting differential LVDS input; ROUT goes low when VID = VA - VB is at or below -50 mV. |
| 5 | ROUT | output | CMOS receiver output with VOH of 2.4 V minimum and VOL of 0.4 V maximum at 8 mA; output is high impedance when VCC is below 1.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | SOT-23-5 |
| Category | Interface |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 3 | 3.3 | 3.6 | V | 3 | |
| Magnitude of differential input voltage | /VID/ | 0.1 | 0.6 | V | 3 | ||
| Operating free-air temperature | TA | -40 | 105 | °C | 3 | ||
| Supply Voltage Range | VCC | -0.5 | 4 | V | 3 | ||
| Voltage Range (A, B, or ROUT) | -0.5 | V | max VCC+0.5V | 3 | |||
| ESD Rating (HBM) | 2 | kV | HBM, 1.5KΩ, 100pF | 3 | |||
| Storage Temperature Range | -65 | 150 | °C | 3 | |||
| Operating Temperature | -40 | 105 | °C | 3 | |||
| Power Rating | 385 | mW | TA = 25°C, 5-Pin SOT-23 (T) | 3 | |||
| Derating Factor Above TA = 25°C | 3.1 | mW/°C | 5-Pin SOT-23 (T), above TA = 25°C | 3 | |||
| Power Rating at TA = 85°C | 200 | mW | TA = 85°C, 5-Pin SOT-23 (T) | 3 | |||
| Positive-going differential input voltage threshold | VITH+ | 100 | mV | See Figure 2, & Table 1 | 4 | ||
| Negative-going differential input voltage threshold | VITH- | -100 | mV | See Figure 2, & Table 1 | 4 | ||
| High-level output voltage | VOH | 2.4 | 3 | V | IOH = -8mA | 4 | |
| Low-level output voltage | VOL | 0.25 | 0.4 | V | IOL = 8mA | 4 | |
| Supply current | ICC | 4 | 7 | mA | No load, Steady state | 4 | |
| Input current (A or B inputs) | II | -20 | 20 | µA | VI = 0V | 4 | |
| Input current (A or B inputs) | II | -1.2 | µA | VI = 2.4V or VCC -0.8 | 4 | ||
| High-level input current (IIA, IIB) | IID | -2 | 2 | µA | VIA = 0V, VIB = 0.1V | 4 | |
| Power-off input current (A or B inputs) | II(OFF) | 20 | µA | VCC = 0V, VI = 2.4V | 4 | ||
| Propagation delay time, low-to-high level output | tPLH | 1.3 | 2.1 | 3.2 | ns | CL = 5pF, See Figure 3 | 5 |
| Propagation delay time, high-to-low level output | tPHL | 1.3 | 2 | 3.2 | ns | 5 | |
| Output signal rise time | tr | 0.7 | 1.4 | ns | 5 | ||
| Output signal fall time | tf | 0.7 | 1.4 | ns | 5 | ||
| Pulse skew (/tPHL - tPLH/) | tsk(p) | 0.1 | 0.5 | ns | 5 |
CAD (KiCad official)
- Symbol:
PI90LV02ATEX - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
pi90lv02atex-etched.step/pi90lv02atex-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pi90lv02atex.step/pi90lv02atex.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (11 pp, sha256
fb9823bfad524f2b, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).