main
Ray
Publish 0.1.0
45f7cf0
PI6CB33602ZLAIEX
Diodes Incorporated · Clock Buffers, Drivers · QFN-40-EP(5x5)
PI6CB33602ZLAIEX from Diodes Incorporated, in a QFN-40-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SADR_TRI | input | Tri-level latch that selects the SMBus address and has an internal pull-down. |
| 2 | BW_SEL_TRI | input | Tri-level latch that selects low loop bandwidth, PLL bypass, or high loop bandwidth, with both internal pull-up and pull-down. |
| 3 | NC | unconnected | Internally connected for the feedback loop; do not connect this pin. |
| 4 | NC | unconnected | Internally connected for the feedback loop; do not connect this pin. |
| 5 | VDD_R | power_in | Power supply for the input differential buffers, 3.135V to 3.465V. |
| 6 | IN+ | input | Differential true clock input. |
| 7 | IN- | input | Differential complementary clock input. |
| 8 | GND_DIG | power_in | Ground for the digital circuitry. |
| 9 | SCLK | input | CMOS SMBus clock input, 3.3V tolerant. |
| 10 | SDATA | bidirectional | CMOS SMBus data line, 3.3V tolerant. |
| 11 | VDD_DIG | power_in | Power supply for the digital circuitry, nominal 3.3V. |
| 12 | VDDO | power_in | Power supply for the differential outputs, 0.95V to 3.465V. |
| 13 | OE0# | input | Active-low CMOS input enabling the Q0 pair (1 = disable outputs, 0 = enable outputs), with internal pull-down. |
| 14 | Q0+ | output | Differential true HCSL clock output. |
| 15 | Q0- | output | Differential complementary HCSL clock output. |
| 16 | VDD | power_in | Power supply, nominal 3.3V (3.135V to 3.465V). |
| 17 | VDDO | power_in | Power supply for the differential outputs, 0.95V to 3.465V. |
| 18 | Q1+ | output | Differential true HCSL clock output. |
| 19 | Q1- | output | Differential complementary HCSL clock output. |
| 20 | NC | unconnected | Do not connect this pin. |
| 21 | OE1# | input | Active-low CMOS input enabling the Q1 pair (1 = disable outputs, 0 = enable outputs), with internal pull-down. |
| 22 | Q2+ | output | Differential true HCSL clock output. |
| 23 | Q2- | output | Differential complementary HCSL clock output. |
| 24 | OE2# | input | Active-low CMOS input enabling the Q2 pair (1 = disable outputs, 0 = enable outputs), with internal pull-down. |
| 25 | VDDA | power_in | Power supply for the analog circuitry, 3.135V to 3.465V. |
| 26 | VDDO | power_in | Power supply for the differential outputs, 0.95V to 3.465V. |
| 27 | Q3+ | output | Differential true HCSL clock output. |
| 28 | Q3- | output | Differential complementary HCSL clock output. |
| 29 | OE3# | input | Active-low CMOS input enabling the Q3 pair (1 = disable outputs, 0 = enable outputs), with internal pull-down. |
| 30 | NC | unconnected | Do not connect this pin. |
| 31 | VDD | power_in | Power supply, nominal 3.3V (3.135V to 3.465V). |
| 32 | VDDO | power_in | Power supply for the differential outputs, 0.95V to 3.465V. |
| 33 | Q4+ | output | Differential true HCSL clock output. |
| 34 | Q4- | output | Differential complementary HCSL clock output. |
| 35 | OE4# | input | Active-low CMOS input enabling the Q4 pair (1 = disable outputs, 0 = enable outputs), with internal pull-down. |
| 36 | Q5+ | output | Differential true HCSL clock output. |
| 37 | Q5- | output | Differential complementary HCSL clock output. |
| 38 | OE5# | input | Active-low CMOS input enabling the Q5 pair (1 = disable outputs, 0 = enable outputs), with internal pull-down. |
| 39 | VDDO | power_in | Power supply for the differential outputs, 0.95V to 3.465V. |
| 40 | PD# | input | Input that makes the device sample latched inputs and start up on first high assertion; low enters Power Down Mode and a subsequent high exits it, with internal pull-up. |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | QFN-40-EP(5x5) |
| Category | Clock and Timing |
| Pins | 41 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VDD, VDDA, VDD_R, VDD_DIG | 3.135 | 3.3 | 3.465 | V | Supply voltages per normal operation conditions | 5 |
| Output Power Supply Voltage | VDDO | 0.95 | 3.465 | V | 5 | ||
| Ambient Temperature | TA | -40 | 85 | °C | Industrial grade | 5 | |
| Analog Power Supply Current | IDDA | 21 | 25 | mA | VDDA, PLL mode, All outputs active @100MHz | 5 | |
| Power Supply Current | IDD | 34 | 40 | mA | VDD + VDD_DIG + VDD_R, All outputs active @100MHz | 5 | |
| Power Supply Current for Outputs | IDDO | 22 | 27 | mA | VDDO, PLL mode, All outputs active @100MHz | 5 | |
| Analog Power Supply Power Down Current | IDDA_PD | 0.5 | 1 | mA | VDDA, PLL mode, All outputs LOW/LOW | 5 | |
| Power Supply Power Down Current | IDD_PD | 1 | 2 | mA | VDD + VDD_DIG + VDD_R, All outputs LOW/LOW | 5 | |
| Power Supply Current Power Down for Outputs | IDDO_PD | 0.04 | 0.1 | mA | VDDO, All outputs LOW/LOW | 5 | |
| Storage Temperature | -65 | 150 | °C | 5 | |||
| Supply Voltage to Ground Potential | VDDxx | -0.5 | 4.6 | V | 5 | ||
| Input Voltage | -0.5 | 4.6 | V | VDD+0.5V, not exceed 4.6V | 5 | ||
| SMBus Input High Voltage | 3.6 | V | 5 | ||||
| ESD Protection (HBM) | 2000 | V | 5 | ||||
| Nominal bus voltage | VDDSMB | 2.7 | 3.6 | V | 6 | ||
| SMBus Input High Voltage | VIHSMB | 2.1 | 3.6 | V | SMBus, VDDSMB = 3.3V | 6 | |
| SMBus Input Low Voltage | VILSMB | 0.8 | V | SMBus, VDDSMB = 3.3V | 6 | ||
| SMBus Output Low Voltage | VOLSMB | 0.4 | V | SMBus, at ISMBSINK | 6 | ||
| SMBus operating frequency | fMAXSMB | 500 | kHz | Maximum frequency | 6 | ||
| SMBus rise time | tRMSB | 1000 | ns | (Max VIL - 0.15) to (Min VIH + 0.15) | 6 | ||
| SMBus fall time | tFMSB | 300 | ns | (Min VIH + 0.15) to (Max VIL - 0.15) | 6 | ||
| Input Low Voltage | VIL | -0.3 | V | Single-ended inputs, except SMBus; max is 0.25 VDD | 6 | ||
| Diff. Input Leakage Current | IIN | -5 | 0.01 | 5 | uA | VIN = VDD, VIN = GND | 7 |
| Diff. Input Duty Cycle | tDC | 45 | 55 | % | Measured differentially | 7 | |
| Diff. Input High Voltage | VIHDIF | 600 | 800 | 1150 | mV | IN+, IN-, single-end measurement | 7 |
| Diff. Input Low Voltage | VILDIF | -300 | 0 | 300 | mV | IN+, IN-, single-end measurement | 7 |
| Input Frequency 100MHz PLL | fIN100 | 99.9 | 100 | 100.1 | MHz | 100MHz PLL | 7 |
| Input Frequency 133MHz PLL | fIN133 | 133.2 | 133.33 | 133.46 | MHz | 133MHz PLL | 7 |
| Input Frequency 125MHz PLL | fIN125 | 124.87 | 125 | 125.12 | MHz | 125MHz PLL | 7 |
| Input Frequency 50MHz PLL | fIN50 | 49.95 | 50 | 50.05 | MHz | 50MHz PLL | 7 |
| Input SS Modulation Freq. PCIe | fMODI-PCIe | 30 | 33 | kHz | Allowable frequency for PCIe applications (Triangular Modulation) | 7 | |
| Input SS Modulation Freq. non-PCIe | fMODIN-non-PCIe | 0 | 46 | kHz | Allowable frequency for non-PCIe applications (Triangular Modulation) | 7 | |
| Output Voltage High | VOH | 660 | 784 | 850 | mV | Statistical measurement on single-ended signal using oscilloscope math function | 8 |
| Output Voltage Low | VOL | -150 | 150 | mV | 8 | ||
| Output Voltage Maximum | VOMAX | 816 | 1150 | mV | Measurement on single ended signal using absolute value | 8 | |
| Output Voltage Minimum | VOMIN | -300 | -42 | mV | 8 | ||
| Output Cross Voltage | VOC | 250 | 430 | 550 | mV | 8 | |
| VOC Magnitude Change | DVOC | 12 | 140 | mV | 8 | ||
| Output Frequency | fOUT | 50 | 100 | 133.33 | MHz | 8 | |
| PLL bandwidth High Bandwidth Mode | BW | 1.3 | 3.2 | 3.6 | MHz | -3dB point in High Bandwidth Mode | 8 |
| PLL bandwidth Low Bandwidth Mode | BW | 0.7 | 1.7 | 1.9 | MHz | -3dB point in Low Bandwidth Mode | 8 |
| Slew rate fast setting | tRF | 2.5 | 3.2 | 4 | V/ns | Scope averaging on fast setting | 8 |
| Slew rate slow setting | tRF | 2.2 | 3 | 3.7 | V/ns | Scope averaging on slow setting | 8 |
| Slew rate matching | DtRF | 7 | 15 | % | Scope averaging on | 8 | |
| Output Skew | tSKEW | 21 | 50 | ps | Averaging on, VT = 50% | 8 | |
| Propagation delay PLL Bypass mode | tPDELAY | 2000 | 2500 | 3000 | ps | PLL Bypass mode, VT = 50% | 8 |
| Propagation delay PLL mode | tPDELAY | -200 | 90 | 200 | ps | PLL mode, VT = 50% | 8 |
| Duty Cycle | tDC | 45 | 50 | 55 | % | Measured differentially, PLL Mode | 8 |
| Duty Cycle Distortion bypass 100MHz | tDCD | -3.5 | 0 | 3.5 | % | Measured differentially, PLL Bypass Mode at 100MHz | 8 |
| Duty Cycle Distortion SE input | tDCD | -10 | 0 | 10 | % | Measured differentially, SE input, PLL Bypass Mode at 100MHz | 8 |
| Cycle to cycle jitter PLL mode | tjc-c | 14 | 50 | ps | PLL mode | 8 | |
| Additive cycle to cycle jitter bypass mode | tjc-c | 0.1 | 1 | ps | Additive jitter, Bypass mode | 8 | |
| Clock stabilization | tSTAB | 0.75 | 1 | ms | From VDD Power-Up and after input clock stabilization or de-assertion of PD# to 1st clock | 7 | |
| PD# de-assertion output enable latency | tPDLAT | 20 | 300 | us | Differential outputs enable after PD# de-assertion | 7 | |
| Output enable latency | tOELAT | 1 | 3 | clocks | Q start after OE# assertion, Q stop after OE# deassertion | 7 | |
| Diff. Input Common Mode Voltage | VCOM | 150 | 900 | mV | 7 | ||
| Diff. Input Swing Voltage | VSWING | 300 | 2900 | mV | Peak to peak value (VIHDIF - VILDIF) | 7 | |
| Input Frequency PLL Bypass mode | fINBP | 1 | 200 | MHz | PLL Bypass mode | 7 |
CAD (KiCad official)
- Symbol:
PI6CB33602ZLAIEX - Footprint:
Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm - 3D model: QFN-40-EP(5x5) (KiCad packages3D, STEP)
- 3D model files:
pi6cb33602zlaiex-etched.step/pi6cb33602zlaiex-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pi6cb33602zlaiex.step/pi6cb33602zlaiex.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (20 pp, sha256
20054ce57b42d7d2, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PI6CB33602ZLAIEX
**Diodes Incorporated** · Clock Buffers, Drivers · QFN-40-EP(5x5)
PI6CB33602ZLAIEX from Diodes Incorporated, in a QFN-40-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SADR_TRI | input | Tri-level latch that selects the SMBus address and has an internal pull-down. |
| 2 | BW_SEL_TRI | input | Tri-level latch that selects low loop bandwidth, PLL bypass, or high loop bandwidth, with both internal pull-up and pull-down. |
| 3 | NC | unconnected | Internally connected for the feedback loop; do not connect this pin. |
| 4 | NC | unconnected | Internally connected for the feedback loop; do not connect this pin. |
| 5 | VDD_R | power_in | Power supply for the input differential buffers, 3.135V to 3.465V. |
| 6 | IN+ | input | Differential true clock input. |
| 7 | IN- | input | Differential complementary clock input. |
| 8 | GND_DIG | power_in | Ground for the digital circuitry. |
| 9 | SCLK | input | CMOS SMBus clock input, 3.3V tolerant. |
| 10 | SDATA | bidirectional | CMOS SMBus data line, 3.3V tolerant. |
| 11 | VDD_DIG | power_in | Power supply for the digital circuitry, nominal 3.3V. |
| 12 | VDDO | power_in | Power supply for the differential outputs, 0.95V to 3.465V. |
| 13 | OE0# | input | Active-low CMOS input enabling the Q0 pair (1 = disable outputs, 0 = enable outputs), with internal pull-down. |
| 14 | Q0+ | output | Differential true HCSL clock output. |
| 15 | Q0- | output | Differential complementary HCSL clock output. |
| 16 | VDD | power_in | Power supply, nominal 3.3V (3.135V to 3.465V). |
| 17 | VDDO | power_in | Power supply for the differential outputs, 0.95V to 3.465V. |
| 18 | Q1+ | output | Differential true HCSL clock output. |
| 19 | Q1- | output | Differential complementary HCSL clock output. |
| 20 | NC | unconnected | Do not connect this pin. |
| 21 | OE1# | input | Active-low CMOS input enabling the Q1 pair (1 = disable outputs, 0 = enable outputs), with internal pull-down. |
| 22 | Q2+ | output | Differential true HCSL clock output. |
| 23 | Q2- | output | Differential complementary HCSL clock output. |
| 24 | OE2# | input | Active-low CMOS input enabling the Q2 pair (1 = disable outputs, 0 = enable outputs), with internal pull-down. |
| 25 | VDDA | power_in | Power supply for the analog circuitry, 3.135V to 3.465V. |
| 26 | VDDO | power_in | Power supply for the differential outputs, 0.95V to 3.465V. |
| 27 | Q3+ | output | Differential true HCSL clock output. |
| 28 | Q3- | output | Differential complementary HCSL clock output. |
| 29 | OE3# | input | Active-low CMOS input enabling the Q3 pair (1 = disable outputs, 0 = enable outputs), with internal pull-down. |
| 30 | NC | unconnected | Do not connect this pin. |
| 31 | VDD | power_in | Power supply, nominal 3.3V (3.135V to 3.465V). |
| 32 | VDDO | power_in | Power supply for the differential outputs, 0.95V to 3.465V. |
| 33 | Q4+ | output | Differential true HCSL clock output. |
| 34 | Q4- | output | Differential complementary HCSL clock output. |
| 35 | OE4# | input | Active-low CMOS input enabling the Q4 pair (1 = disable outputs, 0 = enable outputs), with internal pull-down. |
| 36 | Q5+ | output | Differential true HCSL clock output. |
| 37 | Q5- | output | Differential complementary HCSL clock output. |
| 38 | OE5# | input | Active-low CMOS input enabling the Q5 pair (1 = disable outputs, 0 = enable outputs), with internal pull-down. |
| 39 | VDDO | power_in | Power supply for the differential outputs, 0.95V to 3.465V. |
| 40 | PD# | input | Input that makes the device sample latched inputs and start up on first high assertion; low enters Power Down Mode and a subsequent high exits it, with internal pull-up. |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | QFN-40-EP(5x5) |
| Category | Clock and Timing |
| Pins | 41 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power Supply Voltage | VDD, VDDA, VDD_R, VDD_DIG | 3.135 | 3.3 | 3.465 | V | Supply voltages per normal operation conditions | 5 |
| Output Power Supply Voltage | VDDO | 0.95 | | 3.465 | V | | 5 |
| Ambient Temperature | TA | -40 | | 85 | °C | Industrial grade | 5 |
| Analog Power Supply Current | IDDA | | 21 | 25 | mA | VDDA, PLL mode, All outputs active @100MHz | 5 |
| Power Supply Current | IDD | | 34 | 40 | mA | VDD + VDD_DIG + VDD_R, All outputs active @100MHz | 5 |
| Power Supply Current for Outputs | IDDO | | 22 | 27 | mA | VDDO, PLL mode, All outputs active @100MHz | 5 |
| Analog Power Supply Power Down Current | IDDA_PD | | 0.5 | 1 | mA | VDDA, PLL mode, All outputs LOW/LOW | 5 |
| Power Supply Power Down Current | IDD_PD | | 1 | 2 | mA | VDD + VDD_DIG + VDD_R, All outputs LOW/LOW | 5 |
| Power Supply Current Power Down for Outputs | IDDO_PD | | 0.04 | 0.1 | mA | VDDO, All outputs LOW/LOW | 5 |
| Storage Temperature | | -65 | | 150 | °C | | 5 |
| Supply Voltage to Ground Potential | VDDxx | -0.5 | | 4.6 | V | | 5 |
| Input Voltage | | -0.5 | | 4.6 | V | VDD+0.5V, not exceed 4.6V | 5 |
| SMBus Input High Voltage | | | | 3.6 | V | | 5 |
| ESD Protection (HBM) | | | | 2000 | V | | 5 |
| Nominal bus voltage | VDDSMB | 2.7 | | 3.6 | V | | 6 |
| SMBus Input High Voltage | VIHSMB | 2.1 | | 3.6 | V | SMBus, VDDSMB = 3.3V | 6 |
| SMBus Input Low Voltage | VILSMB | | | 0.8 | V | SMBus, VDDSMB = 3.3V | 6 |
| SMBus Output Low Voltage | VOLSMB | | | 0.4 | V | SMBus, at ISMBSINK | 6 |
| SMBus operating frequency | fMAXSMB | | | 500 | kHz | Maximum frequency | 6 |
| SMBus rise time | tRMSB | | | 1000 | ns | (Max VIL - 0.15) to (Min VIH + 0.15) | 6 |
| SMBus fall time | tFMSB | | | 300 | ns | (Min VIH + 0.15) to (Max VIL - 0.15) | 6 |
| Input Low Voltage | VIL | -0.3 | | | V | Single-ended inputs, except SMBus; max is 0.25 VDD | 6 |
| Diff. Input Leakage Current | IIN | -5 | 0.01 | 5 | uA | VIN = VDD, VIN = GND | 7 |
| Diff. Input Duty Cycle | tDC | 45 | | 55 | % | Measured differentially | 7 |
| Diff. Input High Voltage | VIHDIF | 600 | 800 | 1150 | mV | IN+, IN-, single-end measurement | 7 |
| Diff. Input Low Voltage | VILDIF | -300 | 0 | 300 | mV | IN+, IN-, single-end measurement | 7 |
| Input Frequency 100MHz PLL | fIN100 | 99.9 | 100 | 100.1 | MHz | 100MHz PLL | 7 |
| Input Frequency 133MHz PLL | fIN133 | 133.2 | 133.33 | 133.46 | MHz | 133MHz PLL | 7 |
| Input Frequency 125MHz PLL | fIN125 | 124.87 | 125 | 125.12 | MHz | 125MHz PLL | 7 |
| Input Frequency 50MHz PLL | fIN50 | 49.95 | 50 | 50.05 | MHz | 50MHz PLL | 7 |
| Input SS Modulation Freq. PCIe | fMODI-PCIe | 30 | | 33 | kHz | Allowable frequency for PCIe applications (Triangular Modulation) | 7 |
| Input SS Modulation Freq. non-PCIe | fMODIN-non-PCIe | 0 | | 46 | kHz | Allowable frequency for non-PCIe applications (Triangular Modulation) | 7 |
| Output Voltage High | VOH | 660 | 784 | 850 | mV | Statistical measurement on single-ended signal using oscilloscope math function | 8 |
| Output Voltage Low | VOL | -150 | | 150 | mV | | 8 |
| Output Voltage Maximum | VOMAX | 816 | | 1150 | mV | Measurement on single ended signal using absolute value | 8 |
| Output Voltage Minimum | VOMIN | -300 | | -42 | mV | | 8 |
| Output Cross Voltage | VOC | 250 | 430 | 550 | mV | | 8 |
| VOC Magnitude Change | DVOC | 12 | | 140 | mV | | 8 |
| Output Frequency | fOUT | 50 | 100 | 133.33 | MHz | | 8 |
| PLL bandwidth High Bandwidth Mode | BW | 1.3 | 3.2 | 3.6 | MHz | -3dB point in High Bandwidth Mode | 8 |
| PLL bandwidth Low Bandwidth Mode | BW | 0.7 | 1.7 | 1.9 | MHz | -3dB point in Low Bandwidth Mode | 8 |
| Slew rate fast setting | tRF | 2.5 | 3.2 | 4 | V/ns | Scope averaging on fast setting | 8 |
| Slew rate slow setting | tRF | 2.2 | 3 | 3.7 | V/ns | Scope averaging on slow setting | 8 |
| Slew rate matching | DtRF | 7 | | 15 | % | Scope averaging on | 8 |
| Output Skew | tSKEW | 21 | | 50 | ps | Averaging on, VT = 50% | 8 |
| Propagation delay PLL Bypass mode | tPDELAY | 2000 | 2500 | 3000 | ps | PLL Bypass mode, VT = 50% | 8 |
| Propagation delay PLL mode | tPDELAY | -200 | 90 | 200 | ps | PLL mode, VT = 50% | 8 |
| Duty Cycle | tDC | 45 | 50 | 55 | % | Measured differentially, PLL Mode | 8 |
| Duty Cycle Distortion bypass 100MHz | tDCD | -3.5 | 0 | 3.5 | % | Measured differentially, PLL Bypass Mode at 100MHz | 8 |
| Duty Cycle Distortion SE input | tDCD | -10 | 0 | 10 | % | Measured differentially, SE input, PLL Bypass Mode at 100MHz | 8 |
| Cycle to cycle jitter PLL mode | tjc-c | 14 | | 50 | ps | PLL mode | 8 |
| Additive cycle to cycle jitter bypass mode | tjc-c | 0.1 | | 1 | ps | Additive jitter, Bypass mode | 8 |
| Clock stabilization | tSTAB | 0.75 | 1 | | ms | From VDD Power-Up and after input clock stabilization or de-assertion of PD# to 1st clock | 7 |
| PD# de-assertion output enable latency | tPDLAT | 20 | | 300 | us | Differential outputs enable after PD# de-assertion | 7 |
| Output enable latency | tOELAT | 1 | | 3 | clocks | Q start after OE# assertion, Q stop after OE# deassertion | 7 |
| Diff. Input Common Mode Voltage | VCOM | 150 | | 900 | mV | | 7 |
| Diff. Input Swing Voltage | VSWING | 300 | | 2900 | mV | Peak to peak value (VIHDIF - VILDIF) | 7 |
| Input Frequency PLL Bypass mode | fINBP | 1 | | 200 | MHz | PLL Bypass mode | 7 |
## CAD (KiCad official)
- Symbol: `PI6CB33602ZLAIEX`
- Footprint: `Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm`
- 3D model: QFN-40-EP(5x5) (KiCad packages3D, STEP)
- 3D model files: `pi6cb33602zlaiex-etched.step` / `pi6cb33602zlaiex-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pi6cb33602zlaiex.step` / `pi6cb33602zlaiex.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Diodes Incorporated datasheet](https://www.diodes.com/assets/Datasheets/PI6CB33602ZLAIEX.pdf) (20 pp, sha256 `20054ce57b42d7d2`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pi6cb33602zlaiex-datasheet.pdf)