main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers pi6cb33602zlaiex: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
pi6cb33602zlaiex-etched.glb Publish 0.1.0 · Ray
pi6cb33602zlaiex-etched.step pi6cb33602zlaiex: factory component page (tier=mfr) · Ray
pi6cb33602zlaiex-hero.glb pi6cb33602zlaiex: hero GLB from the etched model (keeps the MPN mark) · Ray
pi6cb33602zlaiex-hero.overlay.json Publish 0.1.0 · Ray
pi6cb33602zlaiex.glb Publish 0.1.0 · Ray
pi6cb33602zlaiex.kicad_mod Publish 0.1.0 · Ray
pi6cb33602zlaiex.kicad_sym Publish 0.1.0 · Ray
pi6cb33602zlaiex.lbr Publish 0.1.0 · Ray
pi6cb33602zlaiex.step Publish 0.1.0 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 41 pins · Ray

PI6CB33602ZLAIEX

Diodes Incorporated · Clock Buffers, Drivers · QFN-40-EP(5x5)

PI6CB33602ZLAIEX from Diodes Incorporated, in a QFN-40-EP(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SADR_TRI input Tri-level latch that selects the SMBus address and has an internal pull-down.
2 BW_SEL_TRI input Tri-level latch that selects low loop bandwidth, PLL bypass, or high loop bandwidth, with both internal pull-up and pull-down.
3 NC unconnected Internally connected for the feedback loop; do not connect this pin.
4 NC unconnected Internally connected for the feedback loop; do not connect this pin.
5 VDD_R power_in Power supply for the input differential buffers, 3.135V to 3.465V.
6 IN+ input Differential true clock input.
7 IN- input Differential complementary clock input.
8 GND_DIG power_in Ground for the digital circuitry.
9 SCLK input CMOS SMBus clock input, 3.3V tolerant.
10 SDATA bidirectional CMOS SMBus data line, 3.3V tolerant.
11 VDD_DIG power_in Power supply for the digital circuitry, nominal 3.3V.
12 VDDO power_in Power supply for the differential outputs, 0.95V to 3.465V.
13 OE0# input Active-low CMOS input enabling the Q0 pair (1 = disable outputs, 0 = enable outputs), with internal pull-down.
14 Q0+ output Differential true HCSL clock output.
15 Q0- output Differential complementary HCSL clock output.
16 VDD power_in Power supply, nominal 3.3V (3.135V to 3.465V).
17 VDDO power_in Power supply for the differential outputs, 0.95V to 3.465V.
18 Q1+ output Differential true HCSL clock output.
19 Q1- output Differential complementary HCSL clock output.
20 NC unconnected Do not connect this pin.
21 OE1# input Active-low CMOS input enabling the Q1 pair (1 = disable outputs, 0 = enable outputs), with internal pull-down.
22 Q2+ output Differential true HCSL clock output.
23 Q2- output Differential complementary HCSL clock output.
24 OE2# input Active-low CMOS input enabling the Q2 pair (1 = disable outputs, 0 = enable outputs), with internal pull-down.
25 VDDA power_in Power supply for the analog circuitry, 3.135V to 3.465V.
26 VDDO power_in Power supply for the differential outputs, 0.95V to 3.465V.
27 Q3+ output Differential true HCSL clock output.
28 Q3- output Differential complementary HCSL clock output.
29 OE3# input Active-low CMOS input enabling the Q3 pair (1 = disable outputs, 0 = enable outputs), with internal pull-down.
30 NC unconnected Do not connect this pin.
31 VDD power_in Power supply, nominal 3.3V (3.135V to 3.465V).
32 VDDO power_in Power supply for the differential outputs, 0.95V to 3.465V.
33 Q4+ output Differential true HCSL clock output.
34 Q4- output Differential complementary HCSL clock output.
35 OE4# input Active-low CMOS input enabling the Q4 pair (1 = disable outputs, 0 = enable outputs), with internal pull-down.
36 Q5+ output Differential true HCSL clock output.
37 Q5- output Differential complementary HCSL clock output.
38 OE5# input Active-low CMOS input enabling the Q5 pair (1 = disable outputs, 0 = enable outputs), with internal pull-down.
39 VDDO power_in Power supply for the differential outputs, 0.95V to 3.465V.
40 PD# input Input that makes the device sample latched inputs and start up on first high assertion; low enters Power Down Mode and a subsequent high exits it, with internal pull-up.
41 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package QFN-40-EP(5x5)
Category Clock and Timing
Pins 41

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Power Supply Voltage VDD, VDDA, VDD_R, VDD_DIG 3.135 3.3 3.465 V Supply voltages per normal operation conditions 5
Output Power Supply Voltage VDDO 0.95 3.465 V 5
Ambient Temperature TA -40 85 °C Industrial grade 5
Analog Power Supply Current IDDA 21 25 mA VDDA, PLL mode, All outputs active @100MHz 5
Power Supply Current IDD 34 40 mA VDD + VDD_DIG + VDD_R, All outputs active @100MHz 5
Power Supply Current for Outputs IDDO 22 27 mA VDDO, PLL mode, All outputs active @100MHz 5
Analog Power Supply Power Down Current IDDA_PD 0.5 1 mA VDDA, PLL mode, All outputs LOW/LOW 5
Power Supply Power Down Current IDD_PD 1 2 mA VDD + VDD_DIG + VDD_R, All outputs LOW/LOW 5
Power Supply Current Power Down for Outputs IDDO_PD 0.04 0.1 mA VDDO, All outputs LOW/LOW 5
Storage Temperature -65 150 °C 5
Supply Voltage to Ground Potential VDDxx -0.5 4.6 V 5
Input Voltage -0.5 4.6 V VDD+0.5V, not exceed 4.6V 5
SMBus Input High Voltage 3.6 V 5
ESD Protection (HBM) 2000 V 5
Nominal bus voltage VDDSMB 2.7 3.6 V 6
SMBus Input High Voltage VIHSMB 2.1 3.6 V SMBus, VDDSMB = 3.3V 6
SMBus Input Low Voltage VILSMB 0.8 V SMBus, VDDSMB = 3.3V 6
SMBus Output Low Voltage VOLSMB 0.4 V SMBus, at ISMBSINK 6
SMBus operating frequency fMAXSMB 500 kHz Maximum frequency 6
SMBus rise time tRMSB 1000 ns (Max VIL - 0.15) to (Min VIH + 0.15) 6
SMBus fall time tFMSB 300 ns (Min VIH + 0.15) to (Max VIL - 0.15) 6
Input Low Voltage VIL -0.3 V Single-ended inputs, except SMBus; max is 0.25 VDD 6
Diff. Input Leakage Current IIN -5 0.01 5 uA VIN = VDD, VIN = GND 7
Diff. Input Duty Cycle tDC 45 55 % Measured differentially 7
Diff. Input High Voltage VIHDIF 600 800 1150 mV IN+, IN-, single-end measurement 7
Diff. Input Low Voltage VILDIF -300 0 300 mV IN+, IN-, single-end measurement 7
Input Frequency 100MHz PLL fIN100 99.9 100 100.1 MHz 100MHz PLL 7
Input Frequency 133MHz PLL fIN133 133.2 133.33 133.46 MHz 133MHz PLL 7
Input Frequency 125MHz PLL fIN125 124.87 125 125.12 MHz 125MHz PLL 7
Input Frequency 50MHz PLL fIN50 49.95 50 50.05 MHz 50MHz PLL 7
Input SS Modulation Freq. PCIe fMODI-PCIe 30 33 kHz Allowable frequency for PCIe applications (Triangular Modulation) 7
Input SS Modulation Freq. non-PCIe fMODIN-non-PCIe 0 46 kHz Allowable frequency for non-PCIe applications (Triangular Modulation) 7
Output Voltage High VOH 660 784 850 mV Statistical measurement on single-ended signal using oscilloscope math function 8
Output Voltage Low VOL -150 150 mV 8
Output Voltage Maximum VOMAX 816 1150 mV Measurement on single ended signal using absolute value 8
Output Voltage Minimum VOMIN -300 -42 mV 8
Output Cross Voltage VOC 250 430 550 mV 8
VOC Magnitude Change DVOC 12 140 mV 8
Output Frequency fOUT 50 100 133.33 MHz 8
PLL bandwidth High Bandwidth Mode BW 1.3 3.2 3.6 MHz -3dB point in High Bandwidth Mode 8
PLL bandwidth Low Bandwidth Mode BW 0.7 1.7 1.9 MHz -3dB point in Low Bandwidth Mode 8
Slew rate fast setting tRF 2.5 3.2 4 V/ns Scope averaging on fast setting 8
Slew rate slow setting tRF 2.2 3 3.7 V/ns Scope averaging on slow setting 8
Slew rate matching DtRF 7 15 % Scope averaging on 8
Output Skew tSKEW 21 50 ps Averaging on, VT = 50% 8
Propagation delay PLL Bypass mode tPDELAY 2000 2500 3000 ps PLL Bypass mode, VT = 50% 8
Propagation delay PLL mode tPDELAY -200 90 200 ps PLL mode, VT = 50% 8
Duty Cycle tDC 45 50 55 % Measured differentially, PLL Mode 8
Duty Cycle Distortion bypass 100MHz tDCD -3.5 0 3.5 % Measured differentially, PLL Bypass Mode at 100MHz 8
Duty Cycle Distortion SE input tDCD -10 0 10 % Measured differentially, SE input, PLL Bypass Mode at 100MHz 8
Cycle to cycle jitter PLL mode tjc-c 14 50 ps PLL mode 8
Additive cycle to cycle jitter bypass mode tjc-c 0.1 1 ps Additive jitter, Bypass mode 8
Clock stabilization tSTAB 0.75 1 ms From VDD Power-Up and after input clock stabilization or de-assertion of PD# to 1st clock 7
PD# de-assertion output enable latency tPDLAT 20 300 us Differential outputs enable after PD# de-assertion 7
Output enable latency tOELAT 1 3 clocks Q start after OE# assertion, Q stop after OE# deassertion 7
Diff. Input Common Mode Voltage VCOM 150 900 mV 7
Diff. Input Swing Voltage VSWING 300 2900 mV Peak to peak value (VIHDIF - VILDIF) 7
Input Frequency PLL Bypass mode fINBP 1 200 MHz PLL Bypass mode 7

CAD (KiCad official)

  • Symbol: PI6CB33602ZLAIEX
  • Footprint: Package_DFN_QFN:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm
  • 3D model: QFN-40-EP(5x5) (KiCad packages3D, STEP)
  • 3D model files: pi6cb33602zlaiex-etched.step / pi6cb33602zlaiex-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pi6cb33602zlaiex.step / pi6cb33602zlaiex.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (20 pp, sha256 20054ce57b42d7d2, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF