main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers pi6cb33201zdiex: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
pi6cb33201zdiex-etched.glb Publish 0.1.0 · Ray
pi6cb33201zdiex-etched.step pi6cb33201zdiex: factory component page (tier=mfr) · Ray
pi6cb33201zdiex-hero.glb pi6cb33201zdiex: hero GLB from the etched model (keeps the MPN mark) · Ray
pi6cb33201zdiex-hero.overlay.json Publish 0.1.0 · Ray
pi6cb33201zdiex.glb Publish 0.1.0 · Ray
pi6cb33201zdiex.kicad_mod Publish 0.1.0 · Ray
pi6cb33201zdiex.kicad_sym Publish 0.1.0 · Ray
pi6cb33201zdiex.lbr Publish 0.1.0 · Ray
pi6cb33201zdiex.step Publish 0.1.0 · Ray
README.md Publish 0.1.0 · Ray

PI6CB33201ZDIEX

Diodes Incorporated · Clock Buffers, Drivers · TQFN-24-EP(4x4)

PI6CB33201ZDIEX from Diodes Incorporated, in a TQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Internally connected for the feedback loop; do not connect this pin.
2 NC unconnected Internally connected for the feedback loop; do not connect this pin.
3 VDD_R power_in Power supply for the input differential buffers; 3.135 V to 3.465 V (3.3 V nominal) per operating conditions.
4 IN+ input Differential true HCSL clock input; VIHDIF 600 mV to 1150 mV and VILDIF -300 mV to 300 mV.
5 IN- input Differential complementary HCSL clock input; uses the same VIHDIF and VILDIF limits as IN+.
6 GND_DIG power_in Ground for digital circuitry.
7 SDATA bidirectional SMBus data line, 3.3 V tolerant; VOLSMB is 0.4 V max at 4 mA sink.
8 VDD_DIG power_in Power supply for digital circuitry, nominal 3.3 V (3.135 V to 3.465 V per operating conditions).
9 SCLK input SMBus clock input, 3.3 V tolerant; VIHSMB is 2.1 V min at VDDSMB = 3.3 V.
10 VDDO power_in Power supply for the differential outputs; 3.135 V to 3.465 V (3.3 V nominal).
11 NC unconnected Do not connect this pin.
12 NC unconnected Do not connect this pin.
13 Q0+ output Differential true HCSL clock output with on-chip termination; default ZOUT is 100 Ω.
14 Q0- output Differential complementary HCSL clock output with on-chip termination; default ZOUT is 100 Ω.
15 OE0# input Active-low input enabling the Q0 pair (1 = disable outputs, 0 = enable outputs); has an internal pulldown (120 kΩ typ).
16 VDDA power_in Power supply for analog circuitry; 3.135 V to 3.465 V (3.3 V nominal).
17 Q1+ output Differential true HCSL clock output with on-chip termination; default ZOUT is 100 Ω.
18 Q1- output Differential complementary HCSL clock output with on-chip termination; default ZOUT is 100 Ω.
19 OE1# input Active-low input enabling the Q1 pair (1 = disable outputs, 0 = enable outputs); has an internal pulldown (120 kΩ typ).
20 NC unconnected Do not connect this pin.
21 VDDO power_in Power supply for the differential outputs; 3.135 V to 3.465 V (3.3 V nominal).
22 PD# input Power-down input: low enters Power Down Mode and a high assertion exits it, with the latched inputs sampled on first high assertion; has an internal pullup.
23 SADR_TRI input Tri-level latch that selects the SMBus address; has an internal pulldown.
24 BW_SEL_TRI input Tri-level latch that selects low loop bandwidth, PLL bypass, or high loop bandwidth; has both internal pullup and pulldown.
25 EPAD passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Diodes Incorporated
Package TQFN-24-EP(4x4)
Category RTC/Clock Chip
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage Temperature -65 150 °C 5
Supply Voltage to Ground Potential VDDxx -0.5 4.6 V 5
Input Voltage -0.5 4.6 V Printed as VDD+0.5V, not to exceed 4.6V 5
SMBus Input High Voltage 3.6 V 5
ESD Protection (HBM) 2000 V 5
Power Supply Voltage VDDO, VDDA, VDD_R, VDD_DIG 3.135 3.3 3.465 V 5
Analog Power Supply Current IDDA 21 25 mA VDDA, PLL mode, All outputs active @ 100MHz 5
Digital Power Supply Current IDD_DIG 0.1 1 mA VDD_DIG, All outputs active @ 100MHz 5
Power Supply Current for Inputs and Outputs IDDO+R 38 44 mA VDDO + VDD_R, PLL mode, All outputs active @ 100MHz 5
Analog Power Supply Power Down Current IDDA_PD 0.5 1 mA VDDA, PLL mode, All outputs LOW/LOW 5
Power Supply Power Down Current IDD_DIG_PD 0.1 1 mA VDD_DIG, All outputs LOW/LOW 5
Power Supply Current Power Down for Inputs and Outputs IDDO_R_PD 1 2 mA VDDO, VDD_R All outputs LOW/LOW 5
Ambient Temperature TA -40 85 °C Industrial grade 5
Pin Inductance LPIN 7 nH 5
Nominal Bus Voltage VDDSMB 2.7 3.6 V 6
SMBus Input High Voltage VIHSMB 2.1 3.6 V SMBus, VDDSMB = 3.3V 6
SMBus Input Low Voltage VILSMB 0.8 V SMBus, VDDSMB = 3.3V 6
SMBus Sink Current ISMBSINK 4 mA SMBus, at VOLSMB 6
SMBus Output Low Voltage VOLSMB 0.4 V SMBus, at ISMBSINK 6
SMBus Operating Frequency fMAXSMB 500 kHz Maximum frequency 6
SMBus Rise Time tRMSB 1000 ns (Max VIL - 0.15) to (Min VIH + 0.15) 6
SMBus Fall Time tFMSB 300 ns (Min VIH + 0.15) to (Max VIL - 0.15) 6
Input Low Voltage VIL -0.3 V Single-ended inputs, except SMBus 6
Input High Current IIH 5 µA Single-ended inputs, VIN = VDD 6
Input Low Current IIL -5 µA Single-ended inputs, VIN = 0V 6
Input High Current IIH 50 µA Single-ended inputs with pullup/pulldown resistor, VIN = VDD 6
Input Low Current IIL -50 µA Single-ended inputs with pullup/pulldown resistor, VIN = 0V 6
Input Capacitance CIN 1.5 5 pF 6
Output Enable Latency tOELAT 1 3 clocks Q start after OE# assertion; Q stop after OE# de-assertion 7
PD# De-assertion tPDLAT 20 300 µs Differential outputs enable after PD# de-assertion 7
Diff. Input High Voltage VIHDIF 600 800 1150 mV IN+, IN-, single-end measurement 7
Diff. Input Low Voltage VILDIF -300 0 300 mV IN+, IN-, single-end measurement 7
Diff. Input Common Mode Voltage VCOM 150 900 mV 7
Diff. Input Swing Voltage VSWING 300 2900 mV Peak to peak value (VIHDIF - VILDIF) 7
Input Frequency fINBP 1 200 MHz PLL Bypass mode 7
Input Frequency fIN100 99.9 100 100.1 MHz 100MHz PLL 7
Input Frequency fIN133 133.2 133.33 133.46 MHz 133MHz PLL 7
Input Frequency fIN125 124.87 125 125.12 MHz 125MHz PLL 7
Input Frequency fIN50 49.95 50 50.05 MHz 50MHz PLL 7
Input SS Modulation Freq. PCIe fMODI-PCIe 30 33 kHz Allowable frequency for PCIe applications (Triangular Modulation) 7
Input SS Modulation Freq. non-PCIe fMODIN-non-PCIe 0 46 kHz Allowable frequency for non-PCIe applications (Triangular Modulation) 7
Clock stabilization tSTAB 0.75 1 ms From VDD Power-Up and after input clock stabilization or de-assertion of PD# to 1st clock 7
Diff. Input Slew Rate tRF 0.4 V/ns Measured differentially 7
Diff. Input Leakage Current IIN -5 0.01 5 uA VIN = VDD, VIN = GND 7
Diff. Input Duty Cycle tDC 45 55 % Measured differentially 7
Diff. Input Cycle to cycle jitter tjc-c 125 ps Measured differentially 7
Output Voltage High VOH 660 784 850 mV Statistical measurement on single-ended signal using oscilloscope math function; at default SMBUS amplitude settings 8
Output Voltage Low VOL -150 150 mV At default SMBUS amplitude settings 8
Output Voltage Maximum VOMAX 816 1150 mV Measurement on single ended signal using absolute value; at default SMBUS amplitude settings 8
Output Voltage Minimum VOMIN -300 -42 mV At default SMBUS amplitude settings 8
Output Cross Voltage VOC 250 430 550 mV Q+ = Q- crossing on differential rising edge; at default SMBUS amplitude settings 8
VOC Magnitude Change DVOC 12 140 mV At default SMBUS amplitude settings 8
Output Frequency fOUT 50 100 133.33 MHz 8
Slew Rate tRF 2.5 3.2 4 V/ns Scope averaging on fast setting 8
Output Skew tSKEW 11 50 ps Averaging on, VT = 50% 8
Cycle-to-Cycle Jitter tjc-c 14 50 ps PLL mode 8
Thermal Resistance Junction to Ambient θJA 54.4 °C/W Still air 17
Thermal Resistance Junction to Case θJC 40.8 °C/W 17

CAD (KiCad official)

  • Symbol: PI6CB33201ZDIEX
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: TQFN-24-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: pi6cb33201zdiex-etched.step / pi6cb33201zdiex-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pi6cb33201zdiex.step / pi6cb33201zdiex.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Diodes Incorporated datasheet (20 pp, sha256 bd1e3a48c960649c, retrieved 2026-10-29, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF