3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPI6CB33201ZDIEX
Diodes Incorporated · Clock Buffers, Drivers · TQFN-24-EP(4x4)
PI6CB33201ZDIEX from Diodes Incorporated, in a TQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Internally connected for the feedback loop; do not connect this pin. |
| 2 | NC | unconnected | Internally connected for the feedback loop; do not connect this pin. |
| 3 | VDD_R | power_in | Power supply for the input differential buffers; 3.135 V to 3.465 V (3.3 V nominal) per operating conditions. |
| 4 | IN+ | input | Differential true HCSL clock input; VIHDIF 600 mV to 1150 mV and VILDIF -300 mV to 300 mV. |
| 5 | IN- | input | Differential complementary HCSL clock input; uses the same VIHDIF and VILDIF limits as IN+. |
| 6 | GND_DIG | power_in | Ground for digital circuitry. |
| 7 | SDATA | bidirectional | SMBus data line, 3.3 V tolerant; VOLSMB is 0.4 V max at 4 mA sink. |
| 8 | VDD_DIG | power_in | Power supply for digital circuitry, nominal 3.3 V (3.135 V to 3.465 V per operating conditions). |
| 9 | SCLK | input | SMBus clock input, 3.3 V tolerant; VIHSMB is 2.1 V min at VDDSMB = 3.3 V. |
| 10 | VDDO | power_in | Power supply for the differential outputs; 3.135 V to 3.465 V (3.3 V nominal). |
| 11 | NC | unconnected | Do not connect this pin. |
| 12 | NC | unconnected | Do not connect this pin. |
| 13 | Q0+ | output | Differential true HCSL clock output with on-chip termination; default ZOUT is 100 Ω. |
| 14 | Q0- | output | Differential complementary HCSL clock output with on-chip termination; default ZOUT is 100 Ω. |
| 15 | OE0# | input | Active-low input enabling the Q0 pair (1 = disable outputs, 0 = enable outputs); has an internal pulldown (120 kΩ typ). |
| 16 | VDDA | power_in | Power supply for analog circuitry; 3.135 V to 3.465 V (3.3 V nominal). |
| 17 | Q1+ | output | Differential true HCSL clock output with on-chip termination; default ZOUT is 100 Ω. |
| 18 | Q1- | output | Differential complementary HCSL clock output with on-chip termination; default ZOUT is 100 Ω. |
| 19 | OE1# | input | Active-low input enabling the Q1 pair (1 = disable outputs, 0 = enable outputs); has an internal pulldown (120 kΩ typ). |
| 20 | NC | unconnected | Do not connect this pin. |
| 21 | VDDO | power_in | Power supply for the differential outputs; 3.135 V to 3.465 V (3.3 V nominal). |
| 22 | PD# | input | Power-down input: low enters Power Down Mode and a high assertion exits it, with the latched inputs sampled on first high assertion; has an internal pullup. |
| 23 | SADR_TRI | input | Tri-level latch that selects the SMBus address; has an internal pulldown. |
| 24 | BW_SEL_TRI | input | Tri-level latch that selects low loop bandwidth, PLL bypass, or high loop bandwidth; has both internal pullup and pulldown. |
| 25 | EPAD | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Diodes Incorporated |
| Package | TQFN-24-EP(4x4) |
| Category | RTC/Clock Chip |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage Temperature | -65 | 150 | °C | 5 | |||
| Supply Voltage to Ground Potential | VDDxx | -0.5 | 4.6 | V | 5 | ||
| Input Voltage | -0.5 | 4.6 | V | Printed as VDD+0.5V, not to exceed 4.6V | 5 | ||
| SMBus Input High Voltage | 3.6 | V | 5 | ||||
| ESD Protection (HBM) | 2000 | V | 5 | ||||
| Power Supply Voltage | VDDO, VDDA, VDD_R, VDD_DIG | 3.135 | 3.3 | 3.465 | V | 5 | |
| Analog Power Supply Current | IDDA | 21 | 25 | mA | VDDA, PLL mode, All outputs active @ 100MHz | 5 | |
| Digital Power Supply Current | IDD_DIG | 0.1 | 1 | mA | VDD_DIG, All outputs active @ 100MHz | 5 | |
| Power Supply Current for Inputs and Outputs | IDDO+R | 38 | 44 | mA | VDDO + VDD_R, PLL mode, All outputs active @ 100MHz | 5 | |
| Analog Power Supply Power Down Current | IDDA_PD | 0.5 | 1 | mA | VDDA, PLL mode, All outputs LOW/LOW | 5 | |
| Power Supply Power Down Current | IDD_DIG_PD | 0.1 | 1 | mA | VDD_DIG, All outputs LOW/LOW | 5 | |
| Power Supply Current Power Down for Inputs and Outputs | IDDO_R_PD | 1 | 2 | mA | VDDO, VDD_R All outputs LOW/LOW | 5 | |
| Ambient Temperature | TA | -40 | 85 | °C | Industrial grade | 5 | |
| Pin Inductance | LPIN | 7 | nH | 5 | |||
| Nominal Bus Voltage | VDDSMB | 2.7 | 3.6 | V | 6 | ||
| SMBus Input High Voltage | VIHSMB | 2.1 | 3.6 | V | SMBus, VDDSMB = 3.3V | 6 | |
| SMBus Input Low Voltage | VILSMB | 0.8 | V | SMBus, VDDSMB = 3.3V | 6 | ||
| SMBus Sink Current | ISMBSINK | 4 | mA | SMBus, at VOLSMB | 6 | ||
| SMBus Output Low Voltage | VOLSMB | 0.4 | V | SMBus, at ISMBSINK | 6 | ||
| SMBus Operating Frequency | fMAXSMB | 500 | kHz | Maximum frequency | 6 | ||
| SMBus Rise Time | tRMSB | 1000 | ns | (Max VIL - 0.15) to (Min VIH + 0.15) | 6 | ||
| SMBus Fall Time | tFMSB | 300 | ns | (Min VIH + 0.15) to (Max VIL - 0.15) | 6 | ||
| Input Low Voltage | VIL | -0.3 | V | Single-ended inputs, except SMBus | 6 | ||
| Input High Current | IIH | 5 | µA | Single-ended inputs, VIN = VDD | 6 | ||
| Input Low Current | IIL | -5 | µA | Single-ended inputs, VIN = 0V | 6 | ||
| Input High Current | IIH | 50 | µA | Single-ended inputs with pullup/pulldown resistor, VIN = VDD | 6 | ||
| Input Low Current | IIL | -50 | µA | Single-ended inputs with pullup/pulldown resistor, VIN = 0V | 6 | ||
| Input Capacitance | CIN | 1.5 | 5 | pF | 6 | ||
| Output Enable Latency | tOELAT | 1 | 3 | clocks | Q start after OE# assertion; Q stop after OE# de-assertion | 7 | |
| PD# De-assertion | tPDLAT | 20 | 300 | µs | Differential outputs enable after PD# de-assertion | 7 | |
| Diff. Input High Voltage | VIHDIF | 600 | 800 | 1150 | mV | IN+, IN-, single-end measurement | 7 |
| Diff. Input Low Voltage | VILDIF | -300 | 0 | 300 | mV | IN+, IN-, single-end measurement | 7 |
| Diff. Input Common Mode Voltage | VCOM | 150 | 900 | mV | 7 | ||
| Diff. Input Swing Voltage | VSWING | 300 | 2900 | mV | Peak to peak value (VIHDIF - VILDIF) | 7 | |
| Input Frequency | fINBP | 1 | 200 | MHz | PLL Bypass mode | 7 | |
| Input Frequency | fIN100 | 99.9 | 100 | 100.1 | MHz | 100MHz PLL | 7 |
| Input Frequency | fIN133 | 133.2 | 133.33 | 133.46 | MHz | 133MHz PLL | 7 |
| Input Frequency | fIN125 | 124.87 | 125 | 125.12 | MHz | 125MHz PLL | 7 |
| Input Frequency | fIN50 | 49.95 | 50 | 50.05 | MHz | 50MHz PLL | 7 |
| Input SS Modulation Freq. PCIe | fMODI-PCIe | 30 | 33 | kHz | Allowable frequency for PCIe applications (Triangular Modulation) | 7 | |
| Input SS Modulation Freq. non-PCIe | fMODIN-non-PCIe | 0 | 46 | kHz | Allowable frequency for non-PCIe applications (Triangular Modulation) | 7 | |
| Clock stabilization | tSTAB | 0.75 | 1 | ms | From VDD Power-Up and after input clock stabilization or de-assertion of PD# to 1st clock | 7 | |
| Diff. Input Slew Rate | tRF | 0.4 | V/ns | Measured differentially | 7 | ||
| Diff. Input Leakage Current | IIN | -5 | 0.01 | 5 | uA | VIN = VDD, VIN = GND | 7 |
| Diff. Input Duty Cycle | tDC | 45 | 55 | % | Measured differentially | 7 | |
| Diff. Input Cycle to cycle jitter | tjc-c | 125 | ps | Measured differentially | 7 | ||
| Output Voltage High | VOH | 660 | 784 | 850 | mV | Statistical measurement on single-ended signal using oscilloscope math function; at default SMBUS amplitude settings | 8 |
| Output Voltage Low | VOL | -150 | 150 | mV | At default SMBUS amplitude settings | 8 | |
| Output Voltage Maximum | VOMAX | 816 | 1150 | mV | Measurement on single ended signal using absolute value; at default SMBUS amplitude settings | 8 | |
| Output Voltage Minimum | VOMIN | -300 | -42 | mV | At default SMBUS amplitude settings | 8 | |
| Output Cross Voltage | VOC | 250 | 430 | 550 | mV | Q+ = Q- crossing on differential rising edge; at default SMBUS amplitude settings | 8 |
| VOC Magnitude Change | DVOC | 12 | 140 | mV | At default SMBUS amplitude settings | 8 | |
| Output Frequency | fOUT | 50 | 100 | 133.33 | MHz | 8 | |
| Slew Rate | tRF | 2.5 | 3.2 | 4 | V/ns | Scope averaging on fast setting | 8 |
| Output Skew | tSKEW | 11 | 50 | ps | Averaging on, VT = 50% | 8 | |
| Cycle-to-Cycle Jitter | tjc-c | 14 | 50 | ps | PLL mode | 8 | |
| Thermal Resistance Junction to Ambient | θJA | 54.4 | °C/W | Still air | 17 | ||
| Thermal Resistance Junction to Case | θJC | 40.8 | °C/W | 17 |
CAD (KiCad official)
- Symbol:
PI6CB33201ZDIEX - Footprint:
Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm - 3D model: TQFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
pi6cb33201zdiex-etched.step/pi6cb33201zdiex-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pi6cb33201zdiex.step/pi6cb33201zdiex.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Diodes Incorporated datasheet (20 pp, sha256
bd1e3a48c960649c, retrieved 2026-10-29, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).