Generated by kicad-footprint-generator · KiCad file format 20260206
PGA309
Tokmas · ADCs/DACs - Special Purpose · TSSOP-16
PGA309 from Tokmas, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VEXC | output | Bridge sensor excitation output with VEXC upper limit of 5 V at IEXC=5mA and a short-circuit output current of 50 mA. |
| 2 | GNDA | power_in | Analog ground reference for the sensor signal chain (GNDD=GNDA=0 in the test conditions). |
| 3 | VSA | power_in | Analog supply voltage with an operating range of +2.7V to +5.5V and an absolute maximum of +7V. |
| 4 | VIN1 | input | Sensor signal input 1 to the 2x2 input multiplexer, which can swap input polarity for sensors of unknown output polarity. |
| 5 | VIN2 | input | Sensor signal input 2 to the 2x2 input multiplexer, which can swap input polarity for sensors of unknown output polarity. |
| 6 | VFB | input | Output signal feedback pin that sets the precise regulated signal at the output amplifier, with input/output current rated at ±150 mA. |
| 7 | VOUT | output | Analog output with a stated output current of 50 mA; it can also be shared with PRG in 3-wire modules. |
| 8 | VSJ | passive | Output amplifier summing node, used together with VFB for precise regulated signal and output overvoltage and RFI/EMI filtering. |
| 9 | TEST | passive | Test pin; the datasheet gives no operating function beyond being a test pin. |
| 10 | VSD | power_in | Digital supply voltage with a stated range of 4 V to 5.5 V. |
| 11 | GNDD | power_in | Digital ground reference for the digital interface and logic. |
| 12 | PRG | bidirectional | Single-wire UART-compatible programming pin with a bit rate from 4.8 Kb/s to 38.4 Kb/s. |
| 13 | SCL | bidirectional | Two-wire bus clock input or output with clock frequency from 1 kHz to 400 kHz. |
| 14 | SDA | bidirectional | Two-wire bus data input and output, with a timeout mechanism to prevent bus lock-up. |
| 15 | TEMPIN | input | External temperature signal input for an external diode, thermistor, or RTD placed on the sensor surface. |
| 16 | REFIN/OUT | bidirectional | Reference input or output; the internal reference is selectable at 2.5 V or 4.096 V, and this pin should be driven externally or tied to VSA when the internal reference is disabled. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Tokmas |
| Package | TSSOP-16 |
| Category | Data Acquisition |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VSA to VSD | VSA, VSD | -0.3 | 7 | V | VSA to VSD | 1 | |
| Input current VFB, VOUT | -150 | 150 | mA | VFB, VOUT | 1 | ||
| Input current | -10 | 10 | mA | 1 | |||
| HBM ESD | 4 | kV | HBM | 1 | |||
| Operating temperature | -40 | 125 | °C | 1 | |||
| Junction temperature | 165 | °C | 1 | ||||
| Storage temperature range | -60 | 150 | °C | 1 | |||
| Soldering temperature | 300 | °C | soldering, 10 s | 1 | |||
| Supply voltage operating range | VSA | 2.7 | 5.5 | V | 工作电压范围 | 1 | |
| Supply voltage VSA, VSD | VSA, VSD | 4 | 5.5 | V | 6 | ||
| PGA gain range | 4 | 128 | V/V | gain steps 4, 8, 16, 23.7, 32, 42.67, 64, 128 | 3 | ||
| Output voltage range | 0.1 | 4.9 | V | 3 | |||
| External sensor output sensitivity | 1 | 245 | mV/V | 3 | |||
| Offset voltage coarse | -91.91 | 46.41 | μV | 3 | |||
| Output settling time (0.01%) | 7 | 10 | μS | G=8, RL=5KΩ//200pF | 3 | ||
| Output settling time (0.01%) | 7 | 24 | μS | G=191, RL=5KΩ//200pF | 3 | ||
| Zero DAC output voltage range | 0.18 | 4.61 | V | ZERO DAC | 3 | ||
| Zero DAC integral nonlinearity | -29.19 | 28.43 | LSB | ZERO DAC, 16-bit | 3 | ||
| Zero DAC differential nonlinearity | -11.73 | 10.28 | LSB | ZERO DAC, 16-bit | 3 | ||
| Gain DAC output range | 0.33 | 0.99 | V/V | GAIN DAC, 16-bit | 3 | ||
| Gain DAC integral nonlinearity | -33.88 | 35.92 | LSB | GAIN DAC, 16-bit | 3 | ||
| Gain DAC differential nonlinearity | -29.09 | 31.4 | LSB | GAIN DAC, 16-bit | 3 | ||
| Overvoltage comparator offset | 17 | 25 | mV | 4 | |||
| Undervoltage comparator offset | -2 | 2 | mV | 4 | |||
| External temperature current excitation | ITEMP | 2.46 | 2.5 | 2.53 | V | VREF1, register 3, bit D9=1 | 4 |
| Internal voltage reference VREF1 | VREF1 | 2.46 | 2.5 | 2.53 | V | register 3, bit D9=1 | 5 |
| Internal voltage reference VREF2 | VREF2 | 4 | 4.096 | 4.14 | V | register 3, bit D9=0 | 5 |
| REFIN/REFOUT input current, internal VREF | 100 | μA | internal VREF | 5 | |||
| REFIN/REFOUT output current | 1 | mA | VSA>2.7V, VREF=2.5V | 5 | |||
| Internal temperature measurement accuracy | -2 | 2 | ℃ | register 6, bit D9=1 | 5 | ||
| External temperature PGA gain range | 1 | 8 | V/V | GPGA=1, 2, 4, 8 | 5 | ||
| Temperature measurement range | -55 | 150 | ℃ | 6 | |||
| Linear DAC range VFB (first) | VFB | -0.166 | 0.166 | V/V | 6 | ||
| Linear DAC range VFB (second) | VFB | -0.124 | 0.124 | V/V | 6 | ||
| VEXC upper range limit | VEXC | 4.1 | 5 | V | IEXC=5mA | 6 | |
| Pull-up current source | 55 | 85 | 125 | μA | 6 | ||
| Pull-down current source | 15 | 25 | 40 | μA | 6 | ||
| Output low voltage (SDA, SCL, PRG) | 0.4 | V | 6 |
CAD (KiCad official)
- Symbol:
PGA309 - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
pga309-etched.step/pga309-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pga309.step/pga309.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Tokmas datasheet (11 pp, sha256
35ae103ef73a1af2, retrieved 2026-10-27, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).