Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PGA309

Tokmas · ADCs/DACs - Special Purpose · TSSOP-16

PGA309 from Tokmas, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VEXC output Bridge sensor excitation output with VEXC upper limit of 5 V at IEXC=5mA and a short-circuit output current of 50 mA.
2 GNDA power_in Analog ground reference for the sensor signal chain (GNDD=GNDA=0 in the test conditions).
3 VSA power_in Analog supply voltage with an operating range of +2.7V to +5.5V and an absolute maximum of +7V.
4 VIN1 input Sensor signal input 1 to the 2x2 input multiplexer, which can swap input polarity for sensors of unknown output polarity.
5 VIN2 input Sensor signal input 2 to the 2x2 input multiplexer, which can swap input polarity for sensors of unknown output polarity.
6 VFB input Output signal feedback pin that sets the precise regulated signal at the output amplifier, with input/output current rated at ±150 mA.
7 VOUT output Analog output with a stated output current of 50 mA; it can also be shared with PRG in 3-wire modules.
8 VSJ passive Output amplifier summing node, used together with VFB for precise regulated signal and output overvoltage and RFI/EMI filtering.
9 TEST passive Test pin; the datasheet gives no operating function beyond being a test pin.
10 VSD power_in Digital supply voltage with a stated range of 4 V to 5.5 V.
11 GNDD power_in Digital ground reference for the digital interface and logic.
12 PRG bidirectional Single-wire UART-compatible programming pin with a bit rate from 4.8 Kb/s to 38.4 Kb/s.
13 SCL bidirectional Two-wire bus clock input or output with clock frequency from 1 kHz to 400 kHz.
14 SDA bidirectional Two-wire bus data input and output, with a timeout mechanism to prevent bus lock-up.
15 TEMPIN input External temperature signal input for an external diode, thermistor, or RTD placed on the sensor surface.
16 REFIN/OUT bidirectional Reference input or output; the internal reference is selectable at 2.5 V or 4.096 V, and this pin should be driven externally or tied to VSA when the internal reference is disabled.

Key specifications

Parameter Value
Manufacturer Tokmas
Package TSSOP-16
Category Data Acquisition
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VSA to VSD VSA, VSD -0.3 7 V VSA to VSD 1
Input current VFB, VOUT -150 150 mA VFB, VOUT 1
Input current -10 10 mA 1
HBM ESD 4 kV HBM 1
Operating temperature -40 125 °C 1
Junction temperature 165 °C 1
Storage temperature range -60 150 °C 1
Soldering temperature 300 °C soldering, 10 s 1
Supply voltage operating range VSA 2.7 5.5 V 工作电压范围 1
Supply voltage VSA, VSD VSA, VSD 4 5.5 V 6
PGA gain range 4 128 V/V gain steps 4, 8, 16, 23.7, 32, 42.67, 64, 128 3
Output voltage range 0.1 4.9 V 3
External sensor output sensitivity 1 245 mV/V 3
Offset voltage coarse -91.91 46.41 μV 3
Output settling time (0.01%) 7 10 μS G=8, RL=5KΩ//200pF 3
Output settling time (0.01%) 7 24 μS G=191, RL=5KΩ//200pF 3
Zero DAC output voltage range 0.18 4.61 V ZERO DAC 3
Zero DAC integral nonlinearity -29.19 28.43 LSB ZERO DAC, 16-bit 3
Zero DAC differential nonlinearity -11.73 10.28 LSB ZERO DAC, 16-bit 3
Gain DAC output range 0.33 0.99 V/V GAIN DAC, 16-bit 3
Gain DAC integral nonlinearity -33.88 35.92 LSB GAIN DAC, 16-bit 3
Gain DAC differential nonlinearity -29.09 31.4 LSB GAIN DAC, 16-bit 3
Overvoltage comparator offset 17 25 mV 4
Undervoltage comparator offset -2 2 mV 4
External temperature current excitation ITEMP 2.46 2.5 2.53 V VREF1, register 3, bit D9=1 4
Internal voltage reference VREF1 VREF1 2.46 2.5 2.53 V register 3, bit D9=1 5
Internal voltage reference VREF2 VREF2 4 4.096 4.14 V register 3, bit D9=0 5
REFIN/REFOUT input current, internal VREF 100 μA internal VREF 5
REFIN/REFOUT output current 1 mA VSA>2.7V, VREF=2.5V 5
Internal temperature measurement accuracy -2 2 ℃ register 6, bit D9=1 5
External temperature PGA gain range 1 8 V/V GPGA=1, 2, 4, 8 5
Temperature measurement range -55 150 ℃ 6
Linear DAC range VFB (first) VFB -0.166 0.166 V/V 6
Linear DAC range VFB (second) VFB -0.124 0.124 V/V 6
VEXC upper range limit VEXC 4.1 5 V IEXC=5mA 6
Pull-up current source 55 85 125 μA 6
Pull-down current source 15 25 40 μA 6
Output low voltage (SDA, SCL, PRG) 0.4 V 6

CAD (KiCad official)

  • Symbol: PGA309
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: pga309-etched.step / pga309-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pga309.step / pga309.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Tokmas datasheet (11 pp, sha256 35ae103ef73a1af2, retrieved 2026-10-27, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF