main
Ray
Publish 0.1.0
b8de9b1
PGA2311UA
Texas Instruments · Audio Power OpAmps · SOIC-16-300mil
PGA2311UA from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ZCEN | input | Zero-crossing enable input (active high); when LOW zero-crossing detection is disabled and when HIGH it is enabled. |
| 2 | CS | input | Chip-select input (active low); data can be written to the device only while CS is LOW. |
| 3 | SDI | input | Serial data input, latched on the rising edge of SCLK, carrying the 16-bit gain word (8 bits per channel). |
| 4 | VD+ | power_in | Digital power supply, +5 V, with a recommended operating range of 4.75 V to 5.25 V. |
| 5 | DGND | power_in | Digital ground, to be kept on a separate ground plane from the analog ground and joined at a single point. |
| 6 | SCLK | input | Serial clock input with a specified frequency range of 0 to 6.25 MHz. |
| 7 | SDO | output | Serial data output used for daisy-chaining, a tri-state output that is high-impedance when CS is HIGH. |
| 8 | MUTE | input | Mute control input (active low) that disconnects the output buffers and terminates the outputs with 10-kΩ resistors to ground. |
| 9 | VINR | input | Analog input for the right channel, which should be driven from a source impedance of 600 Ω or less for optimal performance. |
| 10 | AGNDR | power_in | Analog ground for the right channel, referenced for the unbalanced right-channel input and output. |
| 11 | VOUTR | output | Analog output for the right channel, which can swing within 1.25 V of the analog supplies and drive 660-Ω loads without buffering. |
| 12 | VA+ | power_in | Positive analog power supply, +5 V, with a recommended operating range of 4.75 V to 5.25 V. |
| 13 | VA- | power_in | Negative analog power supply, -5 V, with a recommended operating range of -4.75 V to -5.25 V. |
| 14 | VOUTL | output | Analog output for the left channel, which can swing within 1.25 V of the analog supplies and drive 660-Ω loads without buffering. |
| 15 | AGNDL | power_in | Analog ground for the left channel, referenced for the unbalanced left-channel input and output. |
| 16 | VINL | input | Analog input for the left channel, which should be driven from a source impedance of 600 Ω or less for optimal performance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Amplifiers |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Gain error | -0.05 | 0.05 | dB | Gain setting = 31.5 dB | 5 | ||
| Gain matching | -0.05 | 0.05 | dB | 5 | |||
| Dynamic range | 116 | 120 | dB | VIN = AGND, gain = 0 dB | 5 | ||
| THD+N (A-grade) | 0.0002 | 0.0004 | % | VIN = 2 Vrms, f = 1 kHz; PGA2311PA, UA (A-grade) | 5 | ||
| Output noise | 2.5 | 4 | μVRMS | VIN = AGND, gain = 0 dB | 5 | ||
| Offset voltage | 0.25 | 0.5 | mV | VIN = AGND, gain = 0 dB | 5 | ||
| High-level input voltage | VIH | 2 | V | 5 | |||
| Low-level input voltage | VIL | -0.3 | 0.8 | V | 5 | ||
| Low-level output voltage | VOL | 0.4 | V | IO = -3.2 mA | 5 | ||
| Input leakage current | 1 | 10 | µA | 5 | |||
| Serial clock (SCLK) frequency | fSCLK | 0 | 6.25 | MHz | 5 | ||
| Positive analog power supply operating voltage | VA+ | 4.75 | 5 | 5.25 | V | 6 | |
| Negative analog power supply operating voltage | VA- | -4.75 | -5 | -5.25 | V | 6 | |
| Digital power supply operating voltage | VD+ | 4.75 | 5 | 5.25 | V | 6 | |
| Quiescent current, positive analog supply | IA+ | 8 | 10 | mA | VA+ = +5 V | 6 | |
| Quiescent current, negative analog supply | IA- | 10 | 12 | mA | VA- = -5 V | 6 | |
| Quiescent current, digital supply | ID+ | 0.5 | 1 | mA | VD+ = +5 V | 6 | |
| Operating temperature | TA | -40 | 25 | 85 | °C | 4 | |
| Supply voltage VA+ | VA+ | 5.5 | V | 4 | |||
| Supply voltage VA- | VA- | -5.5 | V | 4 | |||
| Supply voltage VD+ | VD+ | 5.5 | V | 4 | |||
| Digital input voltage | -0.3 | V | 4 | ||||
| Operating temperature (absolute maximum) | TA | -40 | 85 | °C | 4 | ||
| Junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance RθJA | RθJA | 83 | °C/W | DW (SOIC) 16-pin package | 4 | ||
| Junction-to-case (top) thermal resistance RθJC(top) | RθJC(top) | 44 | °C/W | DW (SOIC) 16-pin package | 4 | ||
| Junction-to-board thermal resistance RθJB | RθJB | 40.5 | °C/W | DW (SOIC) 16-pin package | 4 | ||
| Junction-to-top characterization parameter ψJT | ψJT | 11.5 | °C/W | DW (SOIC) 16-pin package | 4 | ||
| Junction-to-board characterization parameter ψJB | ψJB | 40.2 | °C/W | DW (SOIC) 16-pin package | 4 | ||
| Input resistance | 10 | kΩ | 5 | ||||
| Input capacitance (A-grade) | 7 | pF | PGA2311PA, UA (A-grade) | 5 |
CAD (KiCad official)
- Symbol:
PGA2311UA - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
pga2311ua-etched.step/pga2311ua-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pga2311ua.step/pga2311ua.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
17b42f9e9b169986, retrieved 2026-11-20) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PGA2311UA
**Texas Instruments** · Audio Power OpAmps · SOIC-16-300mil
PGA2311UA from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | ZCEN | input | Zero-crossing enable input (active high); when LOW zero-crossing detection is disabled and when HIGH it is enabled. |
| 2 | CS | input | Chip-select input (active low); data can be written to the device only while CS is LOW. |
| 3 | SDI | input | Serial data input, latched on the rising edge of SCLK, carrying the 16-bit gain word (8 bits per channel). |
| 4 | VD+ | power_in | Digital power supply, +5 V, with a recommended operating range of 4.75 V to 5.25 V. |
| 5 | DGND | power_in | Digital ground, to be kept on a separate ground plane from the analog ground and joined at a single point. |
| 6 | SCLK | input | Serial clock input with a specified frequency range of 0 to 6.25 MHz. |
| 7 | SDO | output | Serial data output used for daisy-chaining, a tri-state output that is high-impedance when CS is HIGH. |
| 8 | MUTE | input | Mute control input (active low) that disconnects the output buffers and terminates the outputs with 10-kΩ resistors to ground. |
| 9 | VINR | input | Analog input for the right channel, which should be driven from a source impedance of 600 Ω or less for optimal performance. |
| 10 | AGNDR | power_in | Analog ground for the right channel, referenced for the unbalanced right-channel input and output. |
| 11 | VOUTR | output | Analog output for the right channel, which can swing within 1.25 V of the analog supplies and drive 660-Ω loads without buffering. |
| 12 | VA+ | power_in | Positive analog power supply, +5 V, with a recommended operating range of 4.75 V to 5.25 V. |
| 13 | VA- | power_in | Negative analog power supply, -5 V, with a recommended operating range of -4.75 V to -5.25 V. |
| 14 | VOUTL | output | Analog output for the left channel, which can swing within 1.25 V of the analog supplies and drive 660-Ω loads without buffering. |
| 15 | AGNDL | power_in | Analog ground for the left channel, referenced for the unbalanced left-channel input and output. |
| 16 | VINL | input | Analog input for the left channel, which should be driven from a source impedance of 600 Ω or less for optimal performance. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Amplifiers |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Gain error | | -0.05 | | 0.05 | dB | Gain setting = 31.5 dB | 5 |
| Gain matching | | -0.05 | | 0.05 | dB | | 5 |
| Dynamic range | | 116 | 120 | | dB | VIN = AGND, gain = 0 dB | 5 |
| THD+N (A-grade) | | | 0.0002 | 0.0004 | % | VIN = 2 Vrms, f = 1 kHz; PGA2311PA, UA (A-grade) | 5 |
| Output noise | | | 2.5 | 4 | μVRMS | VIN = AGND, gain = 0 dB | 5 |
| Offset voltage | | | 0.25 | 0.5 | mV | VIN = AGND, gain = 0 dB | 5 |
| High-level input voltage | VIH | 2 | | | V | | 5 |
| Low-level input voltage | VIL | -0.3 | | 0.8 | V | | 5 |
| Low-level output voltage | VOL | | | 0.4 | V | IO = -3.2 mA | 5 |
| Input leakage current | | | 1 | 10 | µA | | 5 |
| Serial clock (SCLK) frequency | fSCLK | 0 | | 6.25 | MHz | | 5 |
| Positive analog power supply operating voltage | VA+ | 4.75 | 5 | 5.25 | V | | 6 |
| Negative analog power supply operating voltage | VA- | -4.75 | -5 | -5.25 | V | | 6 |
| Digital power supply operating voltage | VD+ | 4.75 | 5 | 5.25 | V | | 6 |
| Quiescent current, positive analog supply | IA+ | | 8 | 10 | mA | VA+ = +5 V | 6 |
| Quiescent current, negative analog supply | IA- | | 10 | 12 | mA | VA- = -5 V | 6 |
| Quiescent current, digital supply | ID+ | | 0.5 | 1 | mA | VD+ = +5 V | 6 |
| Operating temperature | TA | -40 | 25 | 85 | °C | | 4 |
| Supply voltage VA+ | VA+ | | | 5.5 | V | | 4 |
| Supply voltage VA- | VA- | -5.5 | | | V | | 4 |
| Supply voltage VD+ | VD+ | | | 5.5 | V | | 4 |
| Digital input voltage | | -0.3 | | | V | | 4 |
| Operating temperature (absolute maximum) | TA | -40 | | 85 | °C | | 4 |
| Junction temperature | TJ | | | 150 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Junction-to-ambient thermal resistance RθJA | RθJA | | 83 | | °C/W | DW (SOIC) 16-pin package | 4 |
| Junction-to-case (top) thermal resistance RθJC(top) | RθJC(top) | | 44 | | °C/W | DW (SOIC) 16-pin package | 4 |
| Junction-to-board thermal resistance RθJB | RθJB | | 40.5 | | °C/W | DW (SOIC) 16-pin package | 4 |
| Junction-to-top characterization parameter ψJT | ψJT | | 11.5 | | °C/W | DW (SOIC) 16-pin package | 4 |
| Junction-to-board characterization parameter ψJB | ψJB | | 40.2 | | °C/W | DW (SOIC) 16-pin package | 4 |
| Input resistance | | | 10 | | kΩ | | 5 |
| Input capacitance (A-grade) | | | 7 | | pF | PGA2311PA, UA (A-grade) | 5 |
## CAD (KiCad official)
- Symbol: `PGA2311UA`
- Footprint: `Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm`
- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files: `pga2311ua-etched.step` / `pga2311ua-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pga2311ua.step` / `pga2311ua.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/pga2311.pdf) (27 pp, sha256 `17b42f9e9b169986`, retrieved 2026-11-20)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pga2311ua-datasheet.pdf)