main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers pga2311ua: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
pga2311ua-etched.glb pga2311ua: factory component page (tier=mfr) · Ray
pga2311ua-etched.step pga2311ua: factory component page (tier=mfr) · Ray
pga2311ua-hero.glb pga2311ua: hero GLB from the etched model (keeps the MPN mark) · Ray
pga2311ua-hero.overlay.json pga2311ua: hero GLB from the etched model (keeps the MPN mark) · Ray
pga2311ua.glb Publish 0.1.0 · Ray
pga2311ua.kicad_mod Publish 0.1.0 · Ray
pga2311ua.kicad_sym Publish 0.1.0 · Ray
pga2311ua.lbr Publish 0.1.0 · Ray
pga2311ua.step Publish 0.1.0 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 16 pins · Ray

PGA2311UA

Texas Instruments · Audio Power OpAmps · SOIC-16-300mil

PGA2311UA from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 ZCEN input Zero-crossing enable input (active high); when LOW zero-crossing detection is disabled and when HIGH it is enabled.
2 CS input Chip-select input (active low); data can be written to the device only while CS is LOW.
3 SDI input Serial data input, latched on the rising edge of SCLK, carrying the 16-bit gain word (8 bits per channel).
4 VD+ power_in Digital power supply, +5 V, with a recommended operating range of 4.75 V to 5.25 V.
5 DGND power_in Digital ground, to be kept on a separate ground plane from the analog ground and joined at a single point.
6 SCLK input Serial clock input with a specified frequency range of 0 to 6.25 MHz.
7 SDO output Serial data output used for daisy-chaining, a tri-state output that is high-impedance when CS is HIGH.
8 MUTE input Mute control input (active low) that disconnects the output buffers and terminates the outputs with 10-kΩ resistors to ground.
9 VINR input Analog input for the right channel, which should be driven from a source impedance of 600 Ω or less for optimal performance.
10 AGNDR power_in Analog ground for the right channel, referenced for the unbalanced right-channel input and output.
11 VOUTR output Analog output for the right channel, which can swing within 1.25 V of the analog supplies and drive 660-Ω loads without buffering.
12 VA+ power_in Positive analog power supply, +5 V, with a recommended operating range of 4.75 V to 5.25 V.
13 VA- power_in Negative analog power supply, -5 V, with a recommended operating range of -4.75 V to -5.25 V.
14 VOUTL output Analog output for the left channel, which can swing within 1.25 V of the analog supplies and drive 660-Ω loads without buffering.
15 AGNDL power_in Analog ground for the left channel, referenced for the unbalanced left-channel input and output.
16 VINL input Analog input for the left channel, which should be driven from a source impedance of 600 Ω or less for optimal performance.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-16-300mil
Category Amplifiers
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Gain error -0.05 0.05 dB Gain setting = 31.5 dB 5
Gain matching -0.05 0.05 dB 5
Dynamic range 116 120 dB VIN = AGND, gain = 0 dB 5
THD+N (A-grade) 0.0002 0.0004 % VIN = 2 Vrms, f = 1 kHz; PGA2311PA, UA (A-grade) 5
Output noise 2.5 4 μVRMS VIN = AGND, gain = 0 dB 5
Offset voltage 0.25 0.5 mV VIN = AGND, gain = 0 dB 5
High-level input voltage VIH 2 V 5
Low-level input voltage VIL -0.3 0.8 V 5
Low-level output voltage VOL 0.4 V IO = -3.2 mA 5
Input leakage current 1 10 µA 5
Serial clock (SCLK) frequency fSCLK 0 6.25 MHz 5
Positive analog power supply operating voltage VA+ 4.75 5 5.25 V 6
Negative analog power supply operating voltage VA- -4.75 -5 -5.25 V 6
Digital power supply operating voltage VD+ 4.75 5 5.25 V 6
Quiescent current, positive analog supply IA+ 8 10 mA VA+ = +5 V 6
Quiescent current, negative analog supply IA- 10 12 mA VA- = -5 V 6
Quiescent current, digital supply ID+ 0.5 1 mA VD+ = +5 V 6
Operating temperature TA -40 25 85 °C 4
Supply voltage VA+ VA+ 5.5 V 4
Supply voltage VA- VA- -5.5 V 4
Supply voltage VD+ VD+ 5.5 V 4
Digital input voltage -0.3 V 4
Operating temperature (absolute maximum) TA -40 85 °C 4
Junction temperature TJ 150 °C 4
Storage temperature Tstg -65 150 °C 4
Junction-to-ambient thermal resistance RθJA RθJA 83 °C/W DW (SOIC) 16-pin package 4
Junction-to-case (top) thermal resistance RθJC(top) RθJC(top) 44 °C/W DW (SOIC) 16-pin package 4
Junction-to-board thermal resistance RθJB RθJB 40.5 °C/W DW (SOIC) 16-pin package 4
Junction-to-top characterization parameter ψJT ψJT 11.5 °C/W DW (SOIC) 16-pin package 4
Junction-to-board characterization parameter ψJB ψJB 40.2 °C/W DW (SOIC) 16-pin package 4
Input resistance 10 kΩ 5
Input capacitance (A-grade) 7 pF PGA2311PA, UA (A-grade) 5

CAD (KiCad official)

  • Symbol: PGA2311UA
  • Footprint: Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm
  • 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
  • 3D model files: pga2311ua-etched.step / pga2311ua-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pga2311ua.step / pga2311ua.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (27 pp, sha256 17b42f9e9b169986, retrieved 2026-11-20)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF