← Commit history

Initial commit: component/pcm4202dbr

Ray ·db83736e97 ·
2 files changed +339
README.mdadded+64
@@ -0,0 +1,64 @@+# PCM4202DBR++**Texas Instruments** · ADCs/DACs - Special Purpose · SSOP-28++PCM4202DBR from Texas Instruments, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | VREFL | output | Left channel voltage reference output; connect 0.1µF X7R ceramic and 33µF tantalum decoupling capacitors to AGNDL; unbuffered output, do not use to bias external circuitry. |+| 2 | AGNDL | power_in | Left channel reference ground; connect to analog ground plane. |+| 3 | VCOML | output | Left channel DC common-mode voltage output, 2.5V typical; use for biasing external input buffer circuitry with load greater than 1MΩ impedance or buffer with voltage follower. |+| 4 | VINL+ | input | Left channel non-inverting analog input; accepts 6.0VPP full-scale differential input corresponding to 2.12VRMS; 3kΩ average input impedance. |+| 5 | VINL− | input | Left channel inverting analog input; accepts 6.0VPP full-scale differential input corresponding to 2.12VRMS; 3kΩ average input impedance. |+| 6 | FMT0 | input | Audio data format selection control pin; digital input for I2S, left-justified, or right-justified format selection. |+| 7 | FMT1 | input | Audio data format selection control pin; digital input for I2S, left-justified, or right-justified format selection. |+| 8 | S/M | input | Audio serial port slave/master mode selection; 0 selects Master mode, 1 selects Slave mode. |+| 9 | FS0 | input | Sampling mode selection control input; used with FS1 and FS2 to configure PCM sampling rate or DSD output data rate. |+| 10 | FS1 | input | Sampling mode selection control input; used with FS0 and FS2 to configure PCM sampling rate or DSD output data rate. |+| 11 | FS2 | input | Sampling mode selection control input; used with FS0 and FS1 to configure PCM sampling rate or DSD output data rate. |+| 12 | HPFD | input | High-pass filter disable control input; active high to disable digital high-pass filter for DC removal in PCM mode. |+| 13 | DGND | power_in | Digital ground; connect to digital power supply ground plane. |+| 14 | VDD | power_in | Digital power supply input, +3.3V nominal. |+| 15 | DATA/DSDR | output | Audio serial port output for 24-bit linear PCM left and right channel data or right channel 1-bit DSD data. |+| 16 | BCK/DSDL | bidirectional | Audio serial port bit clock input in slave mode, bit clock output in master mode; alternatively left channel DSD data output when in DSD mode. |+| 17 | LRCK/DSDBCK | bidirectional | Audio serial port left/right clock input in slave mode, word clock output in master mode; alternatively DSD data clock output when in DSD mode. |+| 18 | SCKI | input | System clock input; external clock required to derive modulator oversampling and digital subsystem clocks; frequency determines PCM sampling rate and DSD data rate. |+| 19 | RST | input | Reset/power-down control input, active low with internal pull-up resistor; used for asynchronous reset and power-down mode operation. |+| 20 | CLIPR | output | Right channel clipping flag output, active high; indicates output clipping has occurred in PCM output mode. |+| 21 | CLIPL | output | Left channel clipping flag output, active high; indicates output clipping has occurred in PCM output mode. |+| 22 | VCC | power_in | Analog power supply input, +5V nominal; required for analog signal path and delta-sigma modulator operation. |+| 23 | AGND | power_in | Analog ground; connect to analog power supply ground plane. |+| 24 | VINR− | input | Right channel inverting analog input; accepts 6.0VPP full-scale differential input corresponding to 2.12VRMS; 3kΩ average input impedance. |+| 25 | VINR+ | input | Right channel non-inverting analog input; accepts 6.0VPP full-scale differential input corresponding to 2.12VRMS; 3kΩ average input impedance. |+| 26 | VCOMR | output | Right channel DC common-mode voltage output, 2.5V typical; use for biasing external input buffer circuitry with load greater than 1MΩ impedance or buffer with voltage follower. |+| 27 | AGNDR | power_in | Right channel reference ground; connect to analog ground plane. |+| 28 | VREFR | output | Right channel voltage reference output; connect 0.1µF X7R ceramic and 33µF tantalum decoupling capacitors to AGNDR; unbuffered output, do not use to bias external circuitry. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SSOP-28 |+| Category | Data Acquisition |+| Pins | 28 |++## CAD (KiCad official)++- Symbol: `PCM4202DBR`+- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`+- 3D model: SSOP-28 (KiCad packages3D, STEP)+- 3D model files: `pcm4202dbr-etched.step` / `pcm4202dbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pcm4202dbr.step` / `pcm4202dbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/pcm4202) (32 pp, sha256 `1b228e85a19f451f`, retrieved 2026-10-01, tier: lcsc)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/pcm4202dbr-datasheet.pdf)
page.jsonadded+275
@@ -0,0 +1,275 @@+{+  "slug": "pcm4202dbr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments ADCs/DACs - Special Purpose, SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "data acquisition",+    "pcm4202dbr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "pcm4202dbr.kicad_sym",+    "pcm4202dbr.kicad_mod",+    "pcm4202dbr.glb",+    "pcm4202dbr.step",+    "pcm4202dbr.lbr",+    "docs/hero.png",+    "docs/pcm4202dbr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "PCM4202DBR",+    "manufacturer": "Texas Instruments",+    "package": "SSOP-28",+    "pin_count": 28,+    "category": "Data Acquisition",+    "subcategory": "ADCs/DACs - Special Purpose",+    "datasheet": "https://www.ti.com/cn/lit/gpn/pcm4202",+    "parts": {+      "symbol": "pcm4202dbr.kicad_sym",+      "footprint": "pcm4202dbr.kicad_mod",+      "model_3d": "pcm4202dbr-etched.glb",+      "model_3d_plain": "pcm4202dbr.glb",+      "model_3d_step": "pcm4202dbr-etched.step",+      "model_3d_step_plain": "pcm4202dbr.step",+      "lbr": "pcm4202dbr.lbr"+    },+    "distributor_links": {+      "lcsc": "C524003",+      "digikey": "296-41379-2-ND",+      "mouser": "595-PCM4202DBR"+    },+    "distributor_check": {+      "checked_at": "2026-10-01T05:54:33Z",+      "source": "Component Ocean /api/assign-pns",+      "digikey": {+        "pn": "296-41379-2-ND",+        "status": "found"+      },+      "mouser": {+        "pn": "595-PCM4202DBR",+        "status": "found"+      }+    },+    "pins": [+      {+        "number": "1",+        "name": "VREFL",+        "type": "output",+        "description": "Left channel voltage reference output; connect 0.1µF X7R ceramic and 33µF tantalum decoupling capacitors to AGNDL; unbuffered output, do not use to bias external circuitry."+      },+      {+        "number": "2",+        "name": "AGNDL",+        "type": "power_in",+        "description": "Left channel reference ground; connect to analog ground plane."+      },+      {+        "number": "3",+        "name": "VCOML",+        "type": "output",+        "description": "Left channel DC common-mode voltage output, 2.5V typical; use for biasing external input buffer circuitry with load greater than 1MΩ impedance or buffer with voltage follower."+      },+      {+        "number": "4",+        "name": "VINL+",+        "type": "input",+        "description": "Left channel non-inverting analog input; accepts 6.0VPP full-scale differential input corresponding to 2.12VRMS; 3kΩ average input impedance."+      },+      {+        "number": "5",+        "name": "VINL−",+        "type": "input",+        "description": "Left channel inverting analog input; accepts 6.0VPP full-scale differential input corresponding to 2.12VRMS; 3kΩ average input impedance."+      },+      {+        "number": "6",+        "name": "FMT0",+        "type": "input",+        "description": "Audio data format selection control pin; digital input for I2S, left-justified, or right-justified format selection."+      },+      {+        "number": "7",+        "name": "FMT1",+        "type": "input",+        "description": "Audio data format selection control pin; digital input for I2S, left-justified, or right-justified format selection."+      },+      {+        "number": "8",+        "name": "S/M",+        "type": "input",+        "description": "Audio serial port slave/master mode selection; 0 selects Master mode, 1 selects Slave mode."+      },+      {+        "number": "9",+        "name": "FS0",+        "type": "input",+        "description": "Sampling mode selection control input; used with FS1 and FS2 to configure PCM sampling rate or DSD output data rate."+      },+      {+        "number": "10",+        "name": "FS1",+        "type": "input",+        "description": "Sampling mode selection control input; used with FS0 and FS2 to configure PCM sampling rate or DSD output data rate."+      },+      {+        "number": "11",+        "name": "FS2",+        "type": "input",+        "description": "Sampling mode selection control input; used with FS0 and FS1 to configure PCM sampling rate or DSD output data rate."+      },+      {+        "number": "12",+        "name": "HPFD",+        "type": "input",+        "description": "High-pass filter disable control input; active high to disable digital high-pass filter for DC removal in PCM mode."+      },+      {+        "number": "13",+        "name": "DGND",+        "type": "power_in",+        "description": "Digital ground; connect to digital power supply ground plane."+      },+      {+        "number": "14",+        "name": "VDD",+        "type": "power_in",+        "description": "Digital power supply input, +3.3V nominal."+      },+      {+        "number": "15",+        "name": "DATA/DSDR",+        "type": "output",+        "description": "Audio serial port output for 24-bit linear PCM left and right channel data or right channel 1-bit DSD data."+      },+      {+        "number": "16",+        "name": "BCK/DSDL",+        "type": "bidirectional",+        "description": "Audio serial port bit clock input in slave mode, bit clock output in master mode; alternatively left channel DSD data output when in DSD mode."+      },+      {+        "number": "17",+        "name": "LRCK/DSDBCK",+        "type": "bidirectional",+        "description": "Audio serial port left/right clock input in slave mode, word clock output in master mode; alternatively DSD data clock output when in DSD mode."+      },+      {+        "number": "18",+        "name": "SCKI",+        "type": "input",+        "description": "System clock input; external clock required to derive modulator oversampling and digital subsystem clocks; frequency determines PCM sampling rate and DSD data rate."+      },+      {+        "number": "19",+        "name": "RST",+        "type": "input",+        "description": "Reset/power-down control input, active low with internal pull-up resistor; used for asynchronous reset and power-down mode operation."+      },+      {+        "number": "20",+        "name": "CLIPR",+        "type": "output",+        "description": "Right channel clipping flag output, active high; indicates output clipping has occurred in PCM output mode."+      },+      {+        "number": "21",+        "name": "CLIPL",+        "type": "output",+        "description": "Left channel clipping flag output, active high; indicates output clipping has occurred in PCM output mode."+      },+      {+        "number": "22",+        "name": "VCC",+        "type": "power_in",+        "description": "Analog power supply input, +5V nominal; required for analog signal path and delta-sigma modulator operation."+      },+      {+        "number": "23",+        "name": "AGND",+        "type": "power_in",+        "description": "Analog ground; connect to analog power supply ground plane."+      },+      {+        "number": "24",+        "name": "VINR−",+        "type": "input",+        "description": "Right channel inverting analog input; accepts 6.0VPP full-scale differential input corresponding to 2.12VRMS; 3kΩ average input impedance."+      },+      {+        "number": "25",+        "name": "VINR+",+        "type": "input",+        "description": "Right channel non-inverting analog input; accepts 6.0VPP full-scale differential input corresponding to 2.12VRMS; 3kΩ average input impedance."+      },+      {+        "number": "26",+        "name": "VCOMR",+        "type": "output",+        "description": "Right channel DC common-mode voltage output, 2.5V typical; use for biasing external input buffer circuitry with load greater than 1MΩ impedance or buffer with voltage follower."+      },+      {+        "number": "27",+        "name": "AGNDR",+        "type": "power_in",+        "description": "Right channel reference ground; connect to analog ground plane."+      },+      {+        "number": "28",+        "name": "VREFR",+        "type": "output",+        "description": "Right channel voltage reference output; connect 0.1µF X7R ceramic and 33µF tantalum decoupling capacitors to AGNDR; unbuffered output, do not use to bias external circuitry."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.3",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.3",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 10,+        "cost_usd": 0.1153,+        "at": "2026-10-01T05:54:14"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/pcm4202",+        "pages": 32,+        "sha256": "1b228e85a19f451f",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 28,+        "described": 28,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file