main
Ray Set visibility: public a4675e8
{
  "schema_version": 1,
  "type": "component",
  "slug": "pcm3500e",
  "title": "PCM3500E",
  "brief": "Texas Instruments Audio Interface ICs, SSOP-24. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "pcm3500e",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "PCM3500E",
    "manufacturer": "Texas Instruments",
    "package": "SSOP-24",
    "pin_count": 24,
    "category": "Interface",
    "subcategory": "Audio Interface ICs",
    "datasheet": "https://www.ti.com/cn/lit/gpn/pcm3500",
    "parts": {
      "symbol": "pcm3500e.kicad_sym",
      "footprint": "pcm3500e.kicad_mod",
      "model_3d": "pcm3500e-hero.glb",
      "model_3d_plain": "pcm3500e.glb",
      "model_3d_step": "pcm3500e-etched.step",
      "model_3d_step_plain": "pcm3500e.step",
      "lbr": "pcm3500e.lbr"
    },
    "distributor_links": {
      "lcsc": "C4990448",
      "digikey": "296-43496-5-ND",
      "mouser": "595-PCM3500E"
    },
    "distributor_check": {
      "checked_at": "2026-10-12T12:08:27Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-43496-5-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "595-PCM3500E",
        "status": "found",
        "lifecycle": "End of Life"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VCOM",
        "type": "output",
        "description": "Common-mode voltage output at 0.5VCC that must be decoupled to ground through a capacitor and is unbuffered, so it should drive only a high-impedance load."
      },
      {
        "number": "2",
        "name": "VREF1",
        "type": "passive",
        "description": "Reference voltage 1 decoupling pin at 0.99VCC that must be connected to ground through a capacitor and is not to be used to bias external circuits."
      },
      {
        "number": "3",
        "name": "VREF2",
        "type": "passive",
        "description": "Reference voltage 2 decoupling pin at 0.2VCC that must be connected to ground through a capacitor and is not to be used to bias external circuits."
      },
      {
        "number": "4",
        "name": "VIN",
        "type": "power_in",
        "description": "Analog input to the ADC, to be AC-coupled to external circuitry."
      },
      {
        "number": "5",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground for the ADC input signal."
      },
      {
        "number": "6",
        "name": "M/S",
        "type": "input",
        "description": "Master/slave select: logic 0 selects Slave Mode and logic 1 selects Master Mode for the serial interface; Schmitt-trigger input with internal pull-down."
      },
      {
        "number": "7",
        "name": "TSC",
        "type": "input",
        "description": "Time slot mode control: logic 0 disables Time Slot Mode and logic 1 enables it; Schmitt-trigger input with internal pull-down."
      },
      {
        "number": "8",
        "name": "BCK",
        "type": "bidirectional",
        "description": "Bit clock for the serial interface, an input in Slave Mode and an output in Master Mode; Schmitt-trigger input."
      },
      {
        "number": "9",
        "name": "FS",
        "type": "bidirectional",
        "description": "Frame sync for the serial interface, an input in Slave Mode and an output in Master Mode; Schmitt-trigger input."
      },
      {
        "number": "10",
        "name": "DIN",
        "type": "input",
        "description": "Serial data input used to write 16-bit data to the DAC; Schmitt-trigger input."
      },
      {
        "number": "11",
        "name": "DOUT",
        "type": "output",
        "description": "Serial data output on which the ADC outputs 16-bit data; tri-state output in Time Slot Mode."
      },
      {
        "number": "12",
        "name": "FSO",
        "type": "output",
        "description": "Frame sync output that is active only when Time Slot Mode is enabled and is high impedance when TSC = 0."
      },
      {
        "number": "13",
        "name": "VDD",
        "type": "power_in",
        "description": "Digital power supply for the ADC and DAC digital section, serial interface and mode control logic, specified at 2.7V to 3.6V and not internally connected to VCC."
      },
      {
        "number": "14",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground, internally connected through the substrate to analog ground."
      },
      {
        "number": "15",
        "name": "SCKIO",
        "type": "bidirectional",
        "description": "System clock input/output that is a clock output when using the crystal oscillator or XTI as input, and a system clock input when XTI is tied to ground; Schmitt-trigger input."
      },
      {
        "number": "16",
        "name": "XTO",
        "type": "output",
        "description": "Crystal oscillator output."
      },
      {
        "number": "17",
        "name": "XTI",
        "type": "input",
        "description": "Crystal oscillator input or external system clock input; Schmitt-trigger input."
      },
      {
        "number": "18",
        "name": "HPFD",
        "type": "input",
        "description": "High-pass filter disable: logic 1 disables the HPF function in the ADC; Schmitt-trigger input with internal pull-down."
      },
      {
        "number": "19",
        "name": "LOOP",
        "type": "input",
        "description": "ADC-to-DAC loop-back control: logic 1 feeds the ADC data to the DAC input; Schmitt-trigger input with internal pull-down."
      },
      {
        "number": "20",
        "name": "PDWN",
        "type": "input",
        "description": "Power-down and reset control: logic 0 enables Power-Down Mode and the PCM3500 is reset on the rising edge; Schmitt-trigger input with internal pull-down."
      },
      {
        "number": "21",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground for the DAC output signal."
      },
      {
        "number": "22",
        "name": "VOUT",
        "type": "output",
        "description": "Analog output from the DAC output filter, to be AC-coupled to external circuitry."
      },
      {
        "number": "23",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground for the internal analog circuitry."
      },
      {
        "number": "24",
        "name": "VCC",
        "type": "power_in",
        "description": "Analog power supply for the ADC and DAC analog circuitry, specified at 2.7V to 3.6V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin-number conflicts in the datasheet: the Applications section (page 21) assigns AGNDs to pins 5, 2; The pin table gives no I/O type for VREF1 and VREF2 (shown as '—'); 'passive' was chosen because the; FSO is listed as OUT in the pin table but the text says it is set to high impedance when Time Slot M"
        ],
        "pages_sent": 11,
        "cost_usd": 0.0738,
        "at": "2026-10-12T12:08:07"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/pcm3500",
        "pages": 30,
        "sha256": "c56f5218a9fdd469",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 24,
        "described": 24,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pcm3500e.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          8.2,
          2.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "77dd0a1fc7e70e9eda1bfde9dde937dc6e391803cff9978790523c850c85a21d",
        "checked": "2026-10-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pcm3500e-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          8.2,
          2.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "c44fc9c0da98ffa362cc05131f39622b941339c9fc1bd45c3bfaab3784974625",
        "checked": "2026-10-12",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "SSOP-24",
      "Category": "Interface",
      "Pins": "24"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "pcm3500e"
  ],
  "discovery_pitch": "PCM3500E (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pcm3500e.kicad_sym",
    "pcm3500e.kicad_mod",
    "pcm3500e.glb",
    "pcm3500e.step",
    "pcm3500e.lbr",
    "docs/hero.png",
    "docs/pcm3500e-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "pcm3500e-hero.glb",
    "pcm3500e-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}