Generated by kicad-footprint-generator · KiCad file format 20260206
PCM3500E
Texas Instruments · Audio Interface ICs · SSOP-24
PCM3500E from Texas Instruments, in a SSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCOM | output | Common-mode voltage output at 0.5VCC that must be decoupled to ground through a capacitor and is unbuffered, so it should drive only a high-impedance load. |
| 2 | VREF1 | passive | Reference voltage 1 decoupling pin at 0.99VCC that must be connected to ground through a capacitor and is not to be used to bias external circuits. |
| 3 | VREF2 | passive | Reference voltage 2 decoupling pin at 0.2VCC that must be connected to ground through a capacitor and is not to be used to bias external circuits. |
| 4 | VIN | power_in | Analog input to the ADC, to be AC-coupled to external circuitry. |
| 5 | AGND | power_in | Analog ground for the ADC input signal. |
| 6 | M/S | input | Master/slave select: logic 0 selects Slave Mode and logic 1 selects Master Mode for the serial interface; Schmitt-trigger input with internal pull-down. |
| 7 | TSC | input | Time slot mode control: logic 0 disables Time Slot Mode and logic 1 enables it; Schmitt-trigger input with internal pull-down. |
| 8 | BCK | bidirectional | Bit clock for the serial interface, an input in Slave Mode and an output in Master Mode; Schmitt-trigger input. |
| 9 | FS | bidirectional | Frame sync for the serial interface, an input in Slave Mode and an output in Master Mode; Schmitt-trigger input. |
| 10 | DIN | input | Serial data input used to write 16-bit data to the DAC; Schmitt-trigger input. |
| 11 | DOUT | output | Serial data output on which the ADC outputs 16-bit data; tri-state output in Time Slot Mode. |
| 12 | FSO | output | Frame sync output that is active only when Time Slot Mode is enabled and is high impedance when TSC = 0. |
| 13 | VDD | power_in | Digital power supply for the ADC and DAC digital section, serial interface and mode control logic, specified at 2.7V to 3.6V and not internally connected to VCC. |
| 14 | DGND | power_in | Digital ground, internally connected through the substrate to analog ground. |
| 15 | SCKIO | bidirectional | System clock input/output that is a clock output when using the crystal oscillator or XTI as input, and a system clock input when XTI is tied to ground; Schmitt-trigger input. |
| 16 | XTO | output | Crystal oscillator output. |
| 17 | XTI | input | Crystal oscillator input or external system clock input; Schmitt-trigger input. |
| 18 | HPFD | input | High-pass filter disable: logic 1 disables the HPF function in the ADC; Schmitt-trigger input with internal pull-down. |
| 19 | LOOP | input | ADC-to-DAC loop-back control: logic 1 feeds the ADC data to the DAC input; Schmitt-trigger input with internal pull-down. |
| 20 | PDWN | input | Power-down and reset control: logic 0 enables Power-Down Mode and the PCM3500 is reset on the rising edge; Schmitt-trigger input with internal pull-down. |
| 21 | AGND | power_in | Analog ground for the DAC output signal. |
| 22 | VOUT | output | Analog output from the DAC output filter, to be AC-coupled to external circuitry. |
| 23 | AGND | power_in | Analog ground for the internal analog circuitry. |
| 24 | VCC | power_in | Analog power supply for the ADC and DAC analog circuitry, specified at 2.7V to 3.6V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-24 |
| Category | Interface |
| Pins | 24 |
CAD (KiCad official)
- Symbol:
PCM3500E - Footprint:
Package_SO:SSOP-24_5.3x8.2mm_P0.65mm - 3D model: SSOP-24 (KiCad packages3D, STEP)
- 3D model files:
pcm3500e-etched.step/pcm3500e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pcm3500e.step/pcm3500e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
c56f5218a9fdd469, retrieved 2026-10-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).