← Commit history

Publish 0.1.2

Ray ·cde9bc87bd · ·parent aa460e5
3 files changed +168−168
README.md+85−85
@@ -2,40 +2,40 @@  **Texas Instruments** · Audio Interface ICs · SSOP-28 -PCM2906CDBR from Texas Instruments, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+PCM2906CDBR from Texas Instruments, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | D+ | bidirectional | USB differential input/output plus, LV-TTL level. |-| 2 | D- | bidirectional | USB differential input/output minus, LV-TTL level. |-| 3 | VBUS | power_in | Connect to USB power (VBUS); the VBUS voltage range is 4.35 V to 5.25 V with 5 V typical. |-| 4 | DGNDU | power_in | Digital ground for the USB transceiver. |-| 5 | HID0 | input | HID key state input (mute), active-high; 3.3-V CMOS-level input with internal pulldown. |-| 6 | HID1 | input | HID key state input (volume up), active-high; 3.3-V CMOS-level input with internal pulldown. |-| 7 | HID2 | input | HID key state input (volume down), active-high; 3.3-V CMOS-level input with internal pulldown. |-| 8 | SEL0 | input | Must be set to high; TTL Schmitt trigger input, 5-V tolerant. |-| 9 | SEL1 | input | Must be set to high; TTL Schmitt trigger input, 5-V tolerant. |-| 10 | VCCCI | power_out | Internal analog power supply for the codec, 3.1 V to 3.5 V (3.3 V typical); connect a decoupling capacitor to GND. |-| 11 | AGNDC | power_in | Analog ground for the codec. |-| 12 | VINL | input | ADC analog input for the L-channel, absolute voltage limited to -0.3 V to (VCCCI + 0.3 V) and less than 4 V. |-| 13 | VINR | input | ADC analog input for the R-channel, absolute voltage limited to -0.3 V to (VCCCI + 0.3 V) and less than 4 V. |-| 14 | VCOM | passive | Common node for ADC/DAC at VCCCI/2; connect a decoupling capacitor to GND. |-| 15 | VOUTR | output | DAC analog output for the R-channel, 0.6 VCCCI Vpp with 0.5 VCCCI center voltage, AC-coupled into a 10 kΩ load. |-| 16 | VOUTL | output | DAC analog output for the L-channel, 0.6 VCCCI Vpp with 0.5 VCCCI center voltage, AC-coupled into a 10 kΩ load. |-| 17 | VCCP1I | power_out | Internal analog power supply for the PLL, 3.1 V to 3.5 V; connect a decoupling capacitor to GND. |-| 18 | AGNDP | power_in | Analog ground for the PLL. |-| 19 | VCCP2I | power_out | Internal analog power supply for the PLL, 3.1 V to 3.5 V; connect a decoupling capacitor to GND. |-| 20 | XTO | output | Crystal oscillator output for the 12 MHz clock source. |-| 21 | XTI | input | Crystal oscillator input, 3.3-V CMOS-level input; input clock 11.994 MHz to 12.006 MHz (12 MHz nominal). |-| 22 | AGNDX | power_in | Analog ground for the oscillator. |-| 23 | VCCXI | power_out | Internal analog power supply for the oscillator, 3.1 V to 3.5 V; connect a decoupling capacitor to GND. |-| 24 | DIN | input | S/PDIF input; 3.3-V CMOS-level input with internal pulldown, 5-V tolerant. |-| 25 | DOUT | output | S/PDIF output. |-| 26 | DGND | power_in | Digital ground. |-| 27 | VDDI | power_out | Internal digital power supply, 3.1 V to 3.5 V; connect a decoupling capacitor to GND. |-| 28 | SSPND | output | Suspend flag, active-low (Low: suspend, High: operational); outputs VOH 2.8 V minimum and VOL 0.3 V to 0.5 V depending on load. |+| 1 | D+ | bidirectional | USB full-speed differential data line (plus), LV-TTL level, absolute maximum range -0.3 V to (VDDI + 0.3 V) and less than 4 V. |+| 2 | D- | bidirectional | USB full-speed differential data line (minus), LV-TTL level, absolute maximum range -0.3 V to (VDDI + 0.3 V) and less than 4 V. |+| 3 | VBUS | power_in | Connects to USB bus power (VBUS), with a 4.35 V to 5.25 V operating range (5 V typical) and an absolute maximum of 6.5 V. |+| 4 | DGNDU | power_in | Digital ground for the USB transceiver, with ground voltage differences limited to ±0.1 V. |+| 5 | HID0 | input | HID key state input for mute, active-high, 3.3-V CMOS level with internal pulldown, reported to the host as a consumer control. |+| 6 | HID1 | input | HID key state input for volume up, active-high, 3.3-V CMOS level with internal pulldown, reported to the host as a consumer control. |+| 7 | HID2 | input | HID key state input for volume down, active-high, 3.3-V CMOS level with internal pulldown, reported to the host as a consumer control. |+| 8 | SEL0 | input | Must be set high; TTL Schmitt-trigger input, 5-V tolerant. |+| 9 | SEL1 | input | Must be set high; TTL Schmitt-trigger input, 5-V tolerant. |+| 10 | VCCCI | power_out | Internal analog power supply for the codec (3.1 V to 3.5 V), requires a decoupling capacitor to GND. |+| 11 | AGNDC | power_in | Analog ground for the codec, with ground voltage differences limited to ±0.1 V. |+| 12 | VINL | input | ADC analog input for the L channel, input voltage 0.6 VCCCI Vpp centered at 0.5 VCCCI, input impedance 30 kΩ. |+| 13 | VINR | input | ADC analog input for the R channel, input voltage 0.6 VCCCI Vpp centered at 0.5 VCCCI, input impedance 30 kΩ. |+| 14 | VCOM | passive | Common reference for ADC/DAC at VCCCI/2, requires a decoupling capacitor to GND. |+| 15 | VOUTR | output | DAC analog output for the R channel, 0.6 VCCCI Vpp centered at 0.5 VCCCI, with a 10 kΩ AC-coupled load minimum impedance. |+| 16 | VOUTL | output | DAC analog output for the L channel, 0.6 VCCCI Vpp centered at 0.5 VCCCI, with a 10 kΩ AC-coupled load minimum impedance. |+| 17 | VCCP1I | power_out | Internal analog power supply for the PLL (3.1 V to 3.5 V), requires a decoupling capacitor to GND. |+| 18 | AGNDP | power_in | Analog ground for the PLL, with ground voltage differences limited to ±0.1 V. |+| 19 | VCCP2I | power_out | Internal analog power supply for the PLL (3.1 V to 3.5 V), requires a decoupling capacitor to GND. |+| 20 | XTO | output | Crystal oscillator output for the 12-MHz resonator; must be left open when an external clock drives XTI. |+| 21 | XTI | input | Crystal oscillator input or external 12-MHz clock input (11.994 MHz to 12.006 MHz), 3.3-V CMOS level. |+| 22 | AGNDX | power_in | Analog ground for the oscillator, with ground voltage differences limited to ±0.1 V. |+| 23 | VCCXI | power_out | Internal analog power supply for the oscillator (3.1 V to 3.5 V), requires a decoupling capacitor to GND. |+| 24 | DIN | input | S/PDIF input, 3.3-V CMOS level with internal pulldown, 5-V tolerant. |+| 25 | DOUT | output | S/PDIF output, with VOH of at least 2.8 V and VOL of at most 0.3 V at the specified test loads. |+| 26 | DGND | power_in | Digital ground, with ground voltage differences limited to ±0.1 V. |+| 27 | VDDI | power_out | Internal digital power supply (3.1 V to 3.5 V), requires a decoupling capacitor to GND. |+| 28 | SSPND | output | Suspend flag, active-low (low: suspend, high: operational), with VOH of at least 2.8 V and VOL of at most 0.5 V. |  ## Key specifications @@ -52,66 +52,66 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply voltage, VBUS |  | -0.3 |  | 6.5 | V |  | 2 |+| Input logic level, pins D+, D- (footnote 1) | VIH | 2 | 3.3 |  | VDC |  | 3 |+| Input logic level, pins D+, D- (footnote 1) | VIL |  |  | 0.8 | VDC |  | 3 |+| Input logic level, pins XTI, HID0-HID2 (footnotes 2, 3) | VIH | 2.52 | 3.3 |  | VDC |  | 3 |+| Input logic level, pins XTI, HID0-HID2 (footnotes 2, 3) | VIL |  |  | 0.9 | VDC |  | 3 |+| Input logic level, pins SEL0, SEL1 (footnote 4) | VIH | 2 | 5.25 |  | VDC |  | 3 |+| Input logic level, pins SEL0, SEL1 (footnote 4) | VIL |  |  | 0.8 | VDC |  | 3 |+| Input logic level, pin DIN (footnote 5) | VIH | 2.52 | 5.25 |  | VDC |  | 3 |+| Input logic level, pin DIN (footnote 5) | VIL |  |  | 0.9 | VDC |  | 3 |+| Input logic current, pins D+, D-, XTI, SEL0, SEL1 (footnotes 1, 2, 4) high | IIH | -10 |  | 10 | μA | VIN = 3.3 V | 3 |+| Input logic current, pins D+, D-, XTI, SEL0, SEL1 (footnotes 1, 2, 4) low | IIL | -10 |  | 10 | μA | VIN = 0 V | 3 |+| Input logic current, pins HID0-HID2 (footnote 3) high | IIH | 50 | 80 |  | μA | VIN = 3.3 V | 3 |+| Input logic current, pins HID0-HID2 (footnote 3) low | IIL | -10 |  | 10 | μA | VIN = 0 V | 3 |+| Input logic current, pin DIN (footnote 5) high | IIH | 65 | 100 |  | μA | VIN = 3.3 V | 3 |+| Input logic current, pin DIN (footnote 5) low | IIL | -10 |  | 10 | μA | VIN = 0 V | 3 |+| Output logic level, pins D+, D- (footnote 1) high | VOH | 2.8 |  |  | VDC |  | 3 |+| Output logic level, pins D+, D- (footnote 1) low | VOL |  |  | 0.3 | VDC |  | 3 |+| Output logic level, pin DOUT (footnote 6) high | VOH | 2.8 |  |  | VDC | IOH = -4 mA | 3 |+| Output logic level, pin DOUT (footnote 6) low | VOL |  |  | 0.5 | VDC | IOL = 4 mA | 3 |+| Output logic level, pin SSPND (footnote 7) high | VOH | 2.8 |  |  | VDC | IOH = -2 mA | 3 |+| Output logic level, pin SSPND (footnote 7) low | VOL |  |  | 0.5 | VDC | IOL = 2 mA | 3 |+| Input clock frequency, XTI |  | 11.994 | 12 | 12.006 | MHz |  | 3 |+| ADC gain mismatch, channel-to-channel |  | -5 | 1 | 5 | % of FSR |  | 4 |+| ADC gain error |  | -10 | 2 | 10 | % of FSR |  | 4 |+| ADC bipolar zero error |  | 0 |  | 0 | % of FSR |  | 4 |+| ADC total harmonic distortion + noise, THD+N | THD+N |  | 0.01 | 0.02 | % | VIN = -1 dB, VCCCI = 3.67 V | 4 |+| ADC total harmonic distortion + noise, THD+N (footnote 10) | THD+N |  |  | 0.1 | % | VIN = -1 dB | 4 |+| ADC digital filter passband ripple |  | -0.05 |  | 0.05 | dB |  | 4 |+| ADC dynamic range |  | 81 | 89 |  | dB | A-weighted | 4 |+| ADC signal-to-noise ratio | SNR | 81 | 89 |  | dB | A-weighted | 4 |+| ADC channel separation |  | 80 | 85 |  | dB |  | 4 |+| DAC gain mismatch, channel-to-channel |  | -5 | 1 | 5 | % of FSR |  | 5 |+| DAC gain error |  | -10 | 2 | 10 | % of FSR |  | 5 |+| DAC bipolar zero error |  | -2 |  | 2 | % of FSR |  | 5 |+| DAC total harmonic distortion + noise, THD+N | THD+N |  | 0.005 | 0.016 | % | VOUT = 0 dB | 5 |+| DAC dynamic range |  | 87 | 93 |  | dB | EIAJ, A-weighted | 5 |+| DAC signal-to-noise ratio | SNR | 90 | 96 |  | dB | EIAJ, A-weighted | 5 |+| DAC channel separation |  | 86 | 92 |  | dB |  | 5 |+| DAC digital filter passband ripple |  | -0.1 |  | 0.1 | dB |  | 5 |+| VBUS voltage range | VBUS | 4.35 | 5 | 5.25 | VDC |  | 5 |+| Supply current, ADC, DAC operation |  |  | 56 | 67 | mA | ADC, DAC operation | 5 |+| Supply current, suspend mode |  |  |  | 250 | μA | Suspend mode | 5 |+| Power dissipation, ADC, DAC operation | PD |  | 280 | 352 | mW | ADC, DAC operation | 5 |+| Power dissipation, suspend mode | PD |  |  | 1.25 | mW | Suspend mode | 5 |+| Internal power-supply voltage (pins 10, 17, 19, 23, 27) |  | 3.1 | 3.3 | 3.5 | VDC |  | 5 |+| Operating temperature range |  | -25 |  | 85 | °C |  | 5 |+| Supply voltage, VBUS | VBUS | -0.3 |  | 6.5 | V |  | 2 | | Ground voltage differences, AGNDC, AGNDP, AGNDX, DGND, DGNDU |  | -0.1 |  | 0.1 | V |  | 2 |-| Digital input voltage, SEL0, SEL1, DIN | V | -0.3 |  | 6.5 | V |  | 2 |-| Digital input voltage, D+, D-, HID0, HID1, HID2, XTI, XTO, DOUT, SSPND | V | -0.3 |  | 4 | V | Printed max is (VDDI + 0.3) < 4 | 2 |-| Analog input voltage, VINL, VINR, VCOM, VOUTR, VOUTL | V | -0.3 |  | 4 | V | Printed max is (VCCCI + 0.3) < 4 | 2 |-| Supply voltage, VCCCI, VCCP1I, VCCP2I, VCCXI, VDDI |  | -0.3 |  | 4 | V |  | 2 |+| Digital input voltage, SEL0, SEL1, DIN |  | -0.3 |  | 6.5 | V |  | 2 |+| Digital input voltage, D+, D-, HID0, HID1, HID2, XTI, XTO, DOUT, SSPND |  | -0.3 |  | 4 | V |  | 2 |+| Analog input voltage, VINL, VINR, VCOM, VOUTR, VOUTL |  | -0.3 |  | 4 | V |  | 2 |+| Supply voltage, internal (VCCCI, VCCP1I, VCCP2I, VCCXI, VDDI) | VCCCI, VCCP1I, VCCP2I, VCCXI, VDDI | -0.3 |  | 4 | V |  | 2 | | Input current (any pins except supplies) |  | -10 |  | 10 | mA |  | 2 | | Ambient temperature under bias |  | -40 |  | 125 | °C |  | 2 | | Storage temperature | Tstg | -55 |  | 150 | °C |  | 2 | | Junction temperature | TJ |  |  | 150 | °C |  | 2 |-| Lead temperature (soldering, 5 s) |  |  |  | 260 | °C | Soldering, 5 s | 2 |-| Package temperature (IR reflow, peak) |  |  |  | 250 | °C | IR reflow, peak | 2 |-| Digital input high voltage, pins 1, 2 (D+, D-) | VIH | 2 |  | 3.3 | VDC | Footnote (1): pins 1, 2 D+, D- | 3 |-| Digital input low voltage, pins 1, 2 (D+, D-) | VIL |  |  | 0.8 | VDC | Footnote (1): pins 1, 2 D+, D- | 3 |-| Digital input high voltage, XTI and HID0-HID2 | VIH | 2.52 |  | 3.3 | VDC | Footnote (2) pin 21 XTI; footnote (3) pins 5, 6, 7 HID0-HID2 | 3 |-| Digital input low voltage, XTI and HID0-HID2 | VIL |  |  | 0.9 | VDC | Footnote (2) pin 21 XTI; footnote (3) pins 5, 6, 7 HID0-HID2 | 3 |-| Digital input high voltage, SEL0, SEL1 | VIH | 2 |  | 5.25 | VDC | Footnote (4): pins 8, 9 SEL0, SEL1 | 3 |-| Digital input low voltage, SEL0, SEL1 | VIL |  |  | 0.8 | VDC | Footnote (4): pins 8, 9 SEL0, SEL1 | 3 |-| Digital input high voltage, DIN | VIH | 2.52 |  | 5.25 | VDC | Footnote (5): pin 24 DIN | 3 |-| Digital input low voltage, DIN | VIL |  |  | 0.9 | VDC | Footnote (5): pin 24 DIN | 3 |-| Input logic current high, pins 1, 2, 8, 9 | IIH | -10 |  | 10 | μA | VIN = 3.3 V | 3 |-| Input logic current low, pins 1, 2, 8, 9 | IIL | -10 |  | 10 | μA | VIN = 0 V | 3 |-| Input logic current high, pins 5, 6, 7 | IIH | 50 |  | 80 | μA | VIN = 3.3 V | 3 |-| Input logic current low, pins 5, 6, 7 | IIL | -10 |  | 10 | μA | VIN = 0 V | 3 |-| Input logic current high, pin 24 DIN | IIH | 65 |  | 100 | μA | VIN = 3.3 V | 3 |-| Input logic current low, pin 24 DIN | IIL | -10 |  | 10 | μA | VIN = 0 V | 3 |-| Output logic high voltage, pins 1, 2 | VOH | 2.8 |  |  | VDC | Footnote (1): pins 1, 2 D+, D- | 3 |-| Output logic low voltage, pins 1, 2 | VOL |  |  | 0.3 | VDC | Footnote (1): pins 1, 2 D+, D- | 3 |-| Output logic high voltage, pin 25 DOUT | VOH | 2.8 |  |  | VDC | IOH = -4 mA | 3 |-| Output logic low voltage, pin 25 DOUT | VOL |  |  | 0.5 | VDC | IOL = 4 mA | 3 |-| Output logic high voltage, pin 28 SSPND | VOH | 2.8 |  |  | VDC | IOH = -2 mA | 3 |-| Output logic low voltage, pin 28 SSPND | VOL |  |  | 0.5 | VDC | IOL = 2 mA | 3 |-| Input clock frequency, XTI |  | 11.994 | 12 | 12.006 | MHz |  | 3 |-| Gain mismatch, channel-to-channel (ADC) |  | -5 | 1 | 5 | % of FSR | channel-to-channel | 4 |-| Gain error (ADC) |  | -10 | 2 | 10 | % of FSR |  | 4 |-| Bipolar zero error (ADC) |  | 0 | 0 | 0 | % of FSR |  | 4 |-| Total harmonic distortion + noise (ADC) | THD+N |  | 0.01 | 0.02 | % | VIN = -1 dB, VCCCI = 3.67 V (external regulator, footnote 9) | 4 |-| Dynamic range (ADC) |  | 81 | 89 |  | dB | A-weighted | 4 |-| Signal-to-noise ratio (ADC) | SNR | 81 | 89 |  | dB | A-weighted | 4 |-| Channel separation (ADC) |  | 80 | 85 |  | dB |  | 4 |-| Passband ripple (ADC digital filter) |  | -0.05 |  | 0.05 | dB | ADC digital filter | 4 |-| Stop-band attenuation (ADC digital filter) |  |  | -65 |  | dB | ADC digital filter | 4 |-| Gain mismatch, channel-to-channel (DAC) |  | -5 | 1 | 5 | % of FSR | channel-to-channel | 5 |-| Gain error (DAC) |  | -10 | 2 | 10 | % of FSR |  | 5 |-| Bipolar zero error (DAC) |  | -2 | 2 | 2 | % of FSR |  | 5 |-| Total harmonic distortion + noise (DAC) | THD+N |  | 0.005 | 0.016 | % | VOUT = 0 dB | 5 |-| Dynamic range (DAC) |  | 87 | 93 |  | dB | EIAJ, A-weighted | 5 |-| Signal-to-noise ratio (DAC) | SNR | 90 | 96 |  | dB | EIAJ, A-weighted | 5 |-| Channel separation (DAC) |  | 86 | 92 |  | dB |  | 5 |-| Passband ripple (DAC digital filter) |  | -0.1 |  | 0.1 | dB | DAC digital filter | 5 |-| Stop-band attenuation (DAC digital filter) |  |  | -43 |  | dB | DAC digital filter | 5 |-| VBUS voltage range |  | 4.35 | 5 | 5.25 | VDC |  | 5 |-| Supply current, ADC and DAC operation |  |  | 56 | 67 | mA | ADC, DAC operation | 5 |-| Supply current, suspend mode |  |  | 250 |  | μA | In USB suspend state | 5 |-| Power dissipation, ADC and DAC operation | PD |  | 280 | 352 | mW | ADC, DAC operation | 5 |-| Internal power-supply voltage |  | 3.1 | 3.3 | 3.5 | VDC | Pins 10, 17, 19, 23, 27: VCCCI, VCCP1I, VCCP2I, VCCXI, VDDI | 5 |-| Operating temperature range |  | -25 |  | 85 | °C |  | 5 |-| Junction-to-ambient thermal resistance | θJA |  | 64.5 |  | °C/W | DB (SSOP) 28 pins | 2 |-| Junction-to-case (top) thermal resistance | θJCtop |  | 24.5 |  | °C/W | DB (SSOP) 28 pins | 2 |-| Junction-to-board thermal resistance | θJB |  | 25.4 |  | °C/W | DB (SSOP) 28 pins | 2 |+| Lead temperature (soldering) |  |  |  | 260 | °C | soldering, 5 s | 2 |+| Package temperature (IR reflow, peak) |  |  |  | 250 | °C |  | 2 |+| Junction-to-ambient thermal resistance | θJA |  | 64.5 |  | °C/W |  | 2 |+| Junction-to-case (top) thermal resistance | θJCtop |  | 24.5 |  | °C/W |  | 2 |+| Junction-to-board thermal resistance | θJB |  | 25.4 |  | °C/W |  | 2 |  ## CAD (KiCad official) @@ -124,7 +124,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/pcm2906c.pdf) (34 pp, sha256 `62824baa1014b78d`, retrieved 2026-11-12, tier: manufacturer)+- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/pcm2906c.pdf) (34 pp, sha256 `62824baa1014b78d`, retrieved 2026-11-13, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
package.json+40−41
@@ -1,6 +1,6 @@ {   "slug": "pcm2906cdbr",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",   "description": "Texas Instruments Audio Interface ICs, SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -28,8 +28,7 @@     "viewers/symbol.html",     "viewers/footprint.html",     "pcm2906cdbr-hero.glb",-    "pcm2906cdbr-hero.overlay.json",-    "pcm2906cdbr-etched.glb"+    "pcm2906cdbr-hero.overlay.json"   ],   "component": {     "mpn": "PCM2906CDBR",@@ -43,7 +42,7 @@       "symbol": "pcm2906cdbr.kicad_sym",       "footprint": "pcm2906cdbr.kicad_mod",       "model_3d": "pcm2906cdbr-hero.glb",-      "model_3d_plain": "pcm2906cdbr-etched.glb",+      "model_3d_plain": "pcm2906cdbr.glb",       "model_3d_step": "pcm2906cdbr-etched.step",       "model_3d_step_plain": "pcm2906cdbr.step",       "lbr": "pcm2906cdbr.lbr"@@ -54,7 +53,7 @@       "mouser": "595-PCM2906CDBR"     },     "distributor_check": {-      "checked_at": "2026-11-12T08:01:31Z",+      "checked_at": "2026-11-13T01:44:13Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-PCM2906CDBRTR-ND",@@ -70,169 +69,169 @@         "number": "1",         "name": "D+",         "type": "bidirectional",-        "description": "USB differential input/output plus, LV-TTL level."+        "description": "USB full-speed differential data line (plus), LV-TTL level, absolute maximum range -0.3 V to (VDDI + 0.3 V) and less than 4 V."       },       {         "number": "2",         "name": "D–",         "type": "bidirectional",-        "description": "USB differential input/output minus, LV-TTL level."+        "description": "USB full-speed differential data line (minus), LV-TTL level, absolute maximum range -0.3 V to (VDDI + 0.3 V) and less than 4 V."       },       {         "number": "3",         "name": "VBUS",         "type": "power_in",-        "description": "Connect to USB power (VBUS); the VBUS voltage range is 4.35 V to 5.25 V with 5 V typical."+        "description": "Connects to USB bus power (VBUS), with a 4.35 V to 5.25 V operating range (5 V typical) and an absolute maximum of 6.5 V."       },       {         "number": "4",         "name": "DGNDU",         "type": "power_in",-        "description": "Digital ground for the USB transceiver."+        "description": "Digital ground for the USB transceiver, with ground voltage differences limited to ±0.1 V."       },       {         "number": "5",         "name": "HID0",         "type": "input",-        "description": "HID key state input (mute), active-high; 3.3-V CMOS-level input with internal pulldown."+        "description": "HID key state input for mute, active-high, 3.3-V CMOS level with internal pulldown, reported to the host as a consumer control."       },       {         "number": "6",         "name": "HID1",         "type": "input",-        "description": "HID key state input (volume up), active-high; 3.3-V CMOS-level input with internal pulldown."+        "description": "HID key state input for volume up, active-high, 3.3-V CMOS level with internal pulldown, reported to the host as a consumer control."       },       {         "number": "7",         "name": "HID2",         "type": "input",-        "description": "HID key state input (volume down), active-high; 3.3-V CMOS-level input with internal pulldown."+        "description": "HID key state input for volume down, active-high, 3.3-V CMOS level with internal pulldown, reported to the host as a consumer control."       },       {         "number": "8",         "name": "SEL0",         "type": "input",-        "description": "Must be set to high; TTL Schmitt trigger input, 5-V tolerant."+        "description": "Must be set high; TTL Schmitt-trigger input, 5-V tolerant."       },       {         "number": "9",         "name": "SEL1",         "type": "input",-        "description": "Must be set to high; TTL Schmitt trigger input, 5-V tolerant."+        "description": "Must be set high; TTL Schmitt-trigger input, 5-V tolerant."       },       {         "number": "10",         "name": "VCCCI",         "type": "power_out",-        "description": "Internal analog power supply for the codec, 3.1 V to 3.5 V (3.3 V typical); connect a decoupling capacitor to GND."+        "description": "Internal analog power supply for the codec (3.1 V to 3.5 V), requires a decoupling capacitor to GND."       },       {         "number": "11",         "name": "AGNDC",         "type": "power_in",-        "description": "Analog ground for the codec."+        "description": "Analog ground for the codec, with ground voltage differences limited to ±0.1 V."       },       {         "number": "12",         "name": "VINL",         "type": "input",-        "description": "ADC analog input for the L-channel, absolute voltage limited to -0.3 V to (VCCCI + 0.3 V) and less than 4 V."+        "description": "ADC analog input for the L channel, input voltage 0.6 VCCCI Vpp centered at 0.5 VCCCI, input impedance 30 kΩ."       },       {         "number": "13",         "name": "VINR",         "type": "input",-        "description": "ADC analog input for the R-channel, absolute voltage limited to -0.3 V to (VCCCI + 0.3 V) and less than 4 V."+        "description": "ADC analog input for the R channel, input voltage 0.6 VCCCI Vpp centered at 0.5 VCCCI, input impedance 30 kΩ."       },       {         "number": "14",         "name": "VCOM",         "type": "passive",-        "description": "Common node for ADC/DAC at VCCCI/2; connect a decoupling capacitor to GND."+        "description": "Common reference for ADC/DAC at VCCCI/2, requires a decoupling capacitor to GND."       },       {         "number": "15",         "name": "VOUTR",         "type": "output",-        "description": "DAC analog output for the R-channel, 0.6 VCCCI Vpp with 0.5 VCCCI center voltage, AC-coupled into a 10 kΩ load."+        "description": "DAC analog output for the R channel, 0.6 VCCCI Vpp centered at 0.5 VCCCI, with a 10 kΩ AC-coupled load minimum impedance."       },       {         "number": "16",         "name": "VOUTL",         "type": "output",-        "description": "DAC analog output for the L-channel, 0.6 VCCCI Vpp with 0.5 VCCCI center voltage, AC-coupled into a 10 kΩ load."+        "description": "DAC analog output for the L channel, 0.6 VCCCI Vpp centered at 0.5 VCCCI, with a 10 kΩ AC-coupled load minimum impedance."       },       {         "number": "17",         "name": "VCCP1I",         "type": "power_out",-        "description": "Internal analog power supply for the PLL, 3.1 V to 3.5 V; connect a decoupling capacitor to GND."+        "description": "Internal analog power supply for the PLL (3.1 V to 3.5 V), requires a decoupling capacitor to GND."       },       {         "number": "18",         "name": "AGNDP",         "type": "power_in",-        "description": "Analog ground for the PLL."+        "description": "Analog ground for the PLL, with ground voltage differences limited to ±0.1 V."       },       {         "number": "19",         "name": "VCCP2I",         "type": "power_out",-        "description": "Internal analog power supply for the PLL, 3.1 V to 3.5 V; connect a decoupling capacitor to GND."+        "description": "Internal analog power supply for the PLL (3.1 V to 3.5 V), requires a decoupling capacitor to GND."       },       {         "number": "20",         "name": "XTO",         "type": "output",-        "description": "Crystal oscillator output for the 12 MHz clock source."+        "description": "Crystal oscillator output for the 12-MHz resonator; must be left open when an external clock drives XTI."       },       {         "number": "21",         "name": "XTI",         "type": "input",-        "description": "Crystal oscillator input, 3.3-V CMOS-level input; input clock 11.994 MHz to 12.006 MHz (12 MHz nominal)."+        "description": "Crystal oscillator input or external 12-MHz clock input (11.994 MHz to 12.006 MHz), 3.3-V CMOS level."       },       {         "number": "22",         "name": "AGNDX",         "type": "power_in",-        "description": "Analog ground for the oscillator."+        "description": "Analog ground for the oscillator, with ground voltage differences limited to ±0.1 V."       },       {         "number": "23",         "name": "VCCXI",         "type": "power_out",-        "description": "Internal analog power supply for the oscillator, 3.1 V to 3.5 V; connect a decoupling capacitor to GND."+        "description": "Internal analog power supply for the oscillator (3.1 V to 3.5 V), requires a decoupling capacitor to GND."       },       {         "number": "24",         "name": "DIN",         "type": "input",-        "description": "S/PDIF input; 3.3-V CMOS-level input with internal pulldown, 5-V tolerant."+        "description": "S/PDIF input, 3.3-V CMOS level with internal pulldown, 5-V tolerant."       },       {         "number": "25",         "name": "DOUT",         "type": "output",-        "description": "S/PDIF output."+        "description": "S/PDIF output, with VOH of at least 2.8 V and VOL of at most 0.3 V at the specified test loads."       },       {         "number": "26",         "name": "DGND",         "type": "power_in",-        "description": "Digital ground."+        "description": "Digital ground, with ground voltage differences limited to ±0.1 V."       },       {         "number": "27",         "name": "VDDI",         "type": "power_out",-        "description": "Internal digital power supply, 3.1 V to 3.5 V; connect a decoupling capacitor to GND."+        "description": "Internal digital power supply (3.1 V to 3.5 V), requires a decoupling capacitor to GND."       },       {         "number": "28",         "name": "SSPND",         "type": "output",-        "description": "Suspend flag, active-low (Low: suspend, High: operational); outputs VOH 2.8 V minimum and VOL 0.3 V to 0.5 V depending on load."+        "description": "Suspend flag, active-low (low: suspend, high: operational), with VOH of at least 2.8 V and VOL of at most 0.5 V."       }     ],     "provenance": {@@ -246,11 +245,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet gives these as internal supplies or the internal common node with decoupling requireme; KiCad ERC has no analog class. Analog inputs are typed input and analog outputs are typed output, fo; The datasheet lists D+ and D- as I/O, so I typed them bidirectional. The datasheet only specifies LV"+          "extractor flagged: Datasheet calls these internal supplies (3.1 to 3.5 V) fed from the internal 5-V to 3.3-V regulator,; VCOM is an internal reference node (VCCCI/2) that only needs a decoupling capacitor; typed as passiv; Datasheet gives LV-TTL level and absolute-maximum limits but no separate DC logic thresholds for D+/"         ],-        "pages_sent": 9,-        "cost_usd": 0.06,-        "at": "2026-11-12T08:01:03"+        "pages_sent": 34,+        "cost_usd": 0.1273,+        "at": "2026-11-13T01:43:52"       },       "datasheet": {         "url": "https://www.ti.com/lit/ds/symlink/pcm2906c.pdf",@@ -287,7 +286,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -305,13 +304,13 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "97816fb6a3a1632cfd69e33bc385e31c03e22b9212eeab33df60583c81fd49c8",-        "checked": "2026-11-12",+        "sha256": "4063f533d1ff5bddb37ba812d14959f6414ed8eda354ebf069987bb09e8fa296",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "DB0028A (SSOP-28, DB)",+      "package_code": "DB0028A",       "source_page": 31,       "D": {         "nom_mm": 10.2,
page.json+43−42
@@ -4,7 +4,7 @@   "slug": "pcm2906cdbr",   "title": "PCM2906CDBR",   "brief": "Texas Instruments Audio Interface ICs, SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.1",+  "version": "0.1.2",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -25,7 +25,7 @@       "symbol": "pcm2906cdbr.kicad_sym",       "footprint": "pcm2906cdbr.kicad_mod",       "model_3d": "pcm2906cdbr-hero.glb",-      "model_3d_plain": "pcm2906cdbr-etched.glb",+      "model_3d_plain": "pcm2906cdbr.glb",       "model_3d_step": "pcm2906cdbr-etched.step",       "model_3d_step_plain": "pcm2906cdbr.step",       "lbr": "pcm2906cdbr.lbr"@@ -36,7 +36,7 @@       "mouser": "595-PCM2906CDBR"     },     "distributor_check": {-      "checked_at": "2026-11-12T08:01:31Z",+      "checked_at": "2026-11-13T01:44:13Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-PCM2906CDBRTR-ND",@@ -52,169 +52,169 @@         "number": "1",         "name": "D+",         "type": "bidirectional",-        "description": "USB differential input/output plus, LV-TTL level."+        "description": "USB full-speed differential data line (plus), LV-TTL level, absolute maximum range -0.3 V to (VDDI + 0.3 V) and less than 4 V."       },       {         "number": "2",         "name": "D–",         "type": "bidirectional",-        "description": "USB differential input/output minus, LV-TTL level."+        "description": "USB full-speed differential data line (minus), LV-TTL level, absolute maximum range -0.3 V to (VDDI + 0.3 V) and less than 4 V."       },       {         "number": "3",         "name": "VBUS",         "type": "power_in",-        "description": "Connect to USB power (VBUS); the VBUS voltage range is 4.35 V to 5.25 V with 5 V typical."+        "description": "Connects to USB bus power (VBUS), with a 4.35 V to 5.25 V operating range (5 V typical) and an absolute maximum of 6.5 V."       },       {         "number": "4",         "name": "DGNDU",         "type": "power_in",-        "description": "Digital ground for the USB transceiver."+        "description": "Digital ground for the USB transceiver, with ground voltage differences limited to ±0.1 V."       },       {         "number": "5",         "name": "HID0",         "type": "input",-        "description": "HID key state input (mute), active-high; 3.3-V CMOS-level input with internal pulldown."+        "description": "HID key state input for mute, active-high, 3.3-V CMOS level with internal pulldown, reported to the host as a consumer control."       },       {         "number": "6",         "name": "HID1",         "type": "input",-        "description": "HID key state input (volume up), active-high; 3.3-V CMOS-level input with internal pulldown."+        "description": "HID key state input for volume up, active-high, 3.3-V CMOS level with internal pulldown, reported to the host as a consumer control."       },       {         "number": "7",         "name": "HID2",         "type": "input",-        "description": "HID key state input (volume down), active-high; 3.3-V CMOS-level input with internal pulldown."+        "description": "HID key state input for volume down, active-high, 3.3-V CMOS level with internal pulldown, reported to the host as a consumer control."       },       {         "number": "8",         "name": "SEL0",         "type": "input",-        "description": "Must be set to high; TTL Schmitt trigger input, 5-V tolerant."+        "description": "Must be set high; TTL Schmitt-trigger input, 5-V tolerant."       },       {         "number": "9",         "name": "SEL1",         "type": "input",-        "description": "Must be set to high; TTL Schmitt trigger input, 5-V tolerant."+        "description": "Must be set high; TTL Schmitt-trigger input, 5-V tolerant."       },       {         "number": "10",         "name": "VCCCI",         "type": "power_out",-        "description": "Internal analog power supply for the codec, 3.1 V to 3.5 V (3.3 V typical); connect a decoupling capacitor to GND."+        "description": "Internal analog power supply for the codec (3.1 V to 3.5 V), requires a decoupling capacitor to GND."       },       {         "number": "11",         "name": "AGNDC",         "type": "power_in",-        "description": "Analog ground for the codec."+        "description": "Analog ground for the codec, with ground voltage differences limited to ±0.1 V."       },       {         "number": "12",         "name": "VINL",         "type": "input",-        "description": "ADC analog input for the L-channel, absolute voltage limited to -0.3 V to (VCCCI + 0.3 V) and less than 4 V."+        "description": "ADC analog input for the L channel, input voltage 0.6 VCCCI Vpp centered at 0.5 VCCCI, input impedance 30 kΩ."       },       {         "number": "13",         "name": "VINR",         "type": "input",-        "description": "ADC analog input for the R-channel, absolute voltage limited to -0.3 V to (VCCCI + 0.3 V) and less than 4 V."+        "description": "ADC analog input for the R channel, input voltage 0.6 VCCCI Vpp centered at 0.5 VCCCI, input impedance 30 kΩ."       },       {         "number": "14",         "name": "VCOM",         "type": "passive",-        "description": "Common node for ADC/DAC at VCCCI/2; connect a decoupling capacitor to GND."+        "description": "Common reference for ADC/DAC at VCCCI/2, requires a decoupling capacitor to GND."       },       {         "number": "15",         "name": "VOUTR",         "type": "output",-        "description": "DAC analog output for the R-channel, 0.6 VCCCI Vpp with 0.5 VCCCI center voltage, AC-coupled into a 10 kΩ load."+        "description": "DAC analog output for the R channel, 0.6 VCCCI Vpp centered at 0.5 VCCCI, with a 10 kΩ AC-coupled load minimum impedance."       },       {         "number": "16",         "name": "VOUTL",         "type": "output",-        "description": "DAC analog output for the L-channel, 0.6 VCCCI Vpp with 0.5 VCCCI center voltage, AC-coupled into a 10 kΩ load."+        "description": "DAC analog output for the L channel, 0.6 VCCCI Vpp centered at 0.5 VCCCI, with a 10 kΩ AC-coupled load minimum impedance."       },       {         "number": "17",         "name": "VCCP1I",         "type": "power_out",-        "description": "Internal analog power supply for the PLL, 3.1 V to 3.5 V; connect a decoupling capacitor to GND."+        "description": "Internal analog power supply for the PLL (3.1 V to 3.5 V), requires a decoupling capacitor to GND."       },       {         "number": "18",         "name": "AGNDP",         "type": "power_in",-        "description": "Analog ground for the PLL."+        "description": "Analog ground for the PLL, with ground voltage differences limited to ±0.1 V."       },       {         "number": "19",         "name": "VCCP2I",         "type": "power_out",-        "description": "Internal analog power supply for the PLL, 3.1 V to 3.5 V; connect a decoupling capacitor to GND."+        "description": "Internal analog power supply for the PLL (3.1 V to 3.5 V), requires a decoupling capacitor to GND."       },       {         "number": "20",         "name": "XTO",         "type": "output",-        "description": "Crystal oscillator output for the 12 MHz clock source."+        "description": "Crystal oscillator output for the 12-MHz resonator; must be left open when an external clock drives XTI."       },       {         "number": "21",         "name": "XTI",         "type": "input",-        "description": "Crystal oscillator input, 3.3-V CMOS-level input; input clock 11.994 MHz to 12.006 MHz (12 MHz nominal)."+        "description": "Crystal oscillator input or external 12-MHz clock input (11.994 MHz to 12.006 MHz), 3.3-V CMOS level."       },       {         "number": "22",         "name": "AGNDX",         "type": "power_in",-        "description": "Analog ground for the oscillator."+        "description": "Analog ground for the oscillator, with ground voltage differences limited to ±0.1 V."       },       {         "number": "23",         "name": "VCCXI",         "type": "power_out",-        "description": "Internal analog power supply for the oscillator, 3.1 V to 3.5 V; connect a decoupling capacitor to GND."+        "description": "Internal analog power supply for the oscillator (3.1 V to 3.5 V), requires a decoupling capacitor to GND."       },       {         "number": "24",         "name": "DIN",         "type": "input",-        "description": "S/PDIF input; 3.3-V CMOS-level input with internal pulldown, 5-V tolerant."+        "description": "S/PDIF input, 3.3-V CMOS level with internal pulldown, 5-V tolerant."       },       {         "number": "25",         "name": "DOUT",         "type": "output",-        "description": "S/PDIF output."+        "description": "S/PDIF output, with VOH of at least 2.8 V and VOL of at most 0.3 V at the specified test loads."       },       {         "number": "26",         "name": "DGND",         "type": "power_in",-        "description": "Digital ground."+        "description": "Digital ground, with ground voltage differences limited to ±0.1 V."       },       {         "number": "27",         "name": "VDDI",         "type": "power_out",-        "description": "Internal digital power supply, 3.1 V to 3.5 V; connect a decoupling capacitor to GND."+        "description": "Internal digital power supply (3.1 V to 3.5 V), requires a decoupling capacitor to GND."       },       {         "number": "28",         "name": "SSPND",         "type": "output",-        "description": "Suspend flag, active-low (Low: suspend, High: operational); outputs VOH 2.8 V minimum and VOL 0.3 V to 0.5 V depending on load."+        "description": "Suspend flag, active-low (low: suspend, high: operational), with VOH of at least 2.8 V and VOL of at most 0.5 V."       }     ],     "provenance": {@@ -228,11 +228,11 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The datasheet gives these as internal supplies or the internal common node with decoupling requireme; KiCad ERC has no analog class. Analog inputs are typed input and analog outputs are typed output, fo; The datasheet lists D+ and D- as I/O, so I typed them bidirectional. The datasheet only specifies LV"+          "extractor flagged: Datasheet calls these internal supplies (3.1 to 3.5 V) fed from the internal 5-V to 3.3-V regulator,; VCOM is an internal reference node (VCCCI/2) that only needs a decoupling capacitor; typed as passiv; Datasheet gives LV-TTL level and absolute-maximum limits but no separate DC logic thresholds for D+/"         ],-        "pages_sent": 9,-        "cost_usd": 0.06,-        "at": "2026-11-12T08:01:03"+        "pages_sent": 34,+        "cost_usd": 0.1273,+        "at": "2026-11-13T01:43:52"       },       "datasheet": {         "url": "https://www.ti.com/lit/ds/symlink/pcm2906c.pdf",@@ -269,7 +269,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -287,13 +287,13 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "97816fb6a3a1632cfd69e33bc385e31c03e22b9212eeab33df60583c81fd49c8",-        "checked": "2026-11-12",+        "sha256": "4063f533d1ff5bddb37ba812d14959f6414ed8eda354ebf069987bb09e8fa296",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "DB0028A (SSOP-28, DB)",+      "package_code": "DB0028A",       "source_page": 31,       "D": {         "nom_mm": 10.2,@@ -1110,10 +1110,11 @@     "viewers/symbol.html",     "viewers/footprint.html",     "pcm2906cdbr-hero.glb",-    "pcm2906cdbr-hero.overlay.json",-    "pcm2906cdbr-etched.glb"+    "pcm2906cdbr-hero.overlay.json"   ],   "visibility": {     "public": true-  }+  },+  "description": "Texas Instruments Audio Interface ICs, SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file