← Commit history

Publish 0.1.1

Ray ·beab5530e6 · ·parent 40db08a
4 files changed +839−827
README.md+75−70
@@ -10,32 +10,32 @@ PCM2906CDBR from Texas Instruments, in a SSOP-28. Pinout and pin descriptions ex |---|---|---|---| | 1 | D+ | bidirectional | USB differential input/output plus, LV-TTL level. | | 2 | D- | bidirectional | USB differential input/output minus, LV-TTL level. |-| 3 | VBUS | power_in | Connect to USB power (VBUS); supply range 4.35 to 5.25 V, 5 V typical. |+| 3 | VBUS | power_in | Connect to USB power (VBUS); the VBUS voltage range is 4.35 V to 5.25 V with 5 V typical. | | 4 | DGNDU | power_in | Digital ground for the USB transceiver. |-| 5 | HID0 | input | HID key state input (mute), active-high, 3.3-V CMOS-level input with internal pulldown. |-| 6 | HID1 | input | HID key state input (volume up), active-high, 3.3-V CMOS-level input with internal pulldown. |-| 7 | HID2 | input | HID key state input (volume down), active-high, 3.3-V CMOS-level input with internal pulldown. |+| 5 | HID0 | input | HID key state input (mute), active-high; 3.3-V CMOS-level input with internal pulldown. |+| 6 | HID1 | input | HID key state input (volume up), active-high; 3.3-V CMOS-level input with internal pulldown. |+| 7 | HID2 | input | HID key state input (volume down), active-high; 3.3-V CMOS-level input with internal pulldown. | | 8 | SEL0 | input | Must be set to high; TTL Schmitt trigger input, 5-V tolerant. | | 9 | SEL1 | input | Must be set to high; TTL Schmitt trigger input, 5-V tolerant. |-| 10 | VCCCI | power_out | Internal analog power supply for codec (about 3.3 V); connect a decoupling capacitor to GND. |-| 11 | AGNDC | power_in | Analog ground for codec. |-| 12 | VINL | input | ADC analog input for L-channel. |-| 13 | VINR | input | ADC analog input for R-channel. |-| 14 | VCOM | passive | Common for ADC/DAC (VCCCI/2); connect a decoupling capacitor to GND. |-| 15 | VOUTR | output | DAC analog output for R-channel. |-| 16 | VOUTL | output | DAC analog output for L-channel. |-| 17 | VCCP1I | power_out | Internal analog power supply for PLL (about 3.3 V); connect a decoupling capacitor to GND. |-| 18 | AGNDP | power_in | Analog ground for PLL. |-| 19 | VCCP2I | power_out | Internal analog power supply for PLL (about 3.3 V); connect a decoupling capacitor to GND. |-| 20 | XTO | output | Crystal oscillator output. |-| 21 | XTI | input | Crystal oscillator input, 3.3-V CMOS level; 12 MHz clock source. |-| 22 | AGNDX | power_in | Analog ground for oscillator. |-| 23 | VCCXI | power_out | Internal analog power supply for oscillator (about 3.3 V); connect a decoupling capacitor to GND. |-| 24 | DIN | input | S/PDIF input, 3.3-V CMOS-level with internal pulldown, 5-V tolerant. |+| 10 | VCCCI | power_out | Internal analog power supply for the codec, 3.1 V to 3.5 V (3.3 V typical); connect a decoupling capacitor to GND. |+| 11 | AGNDC | power_in | Analog ground for the codec. |+| 12 | VINL | input | ADC analog input for the L-channel, absolute voltage limited to -0.3 V to (VCCCI + 0.3 V) and less than 4 V. |+| 13 | VINR | input | ADC analog input for the R-channel, absolute voltage limited to -0.3 V to (VCCCI + 0.3 V) and less than 4 V. |+| 14 | VCOM | passive | Common node for ADC/DAC at VCCCI/2; connect a decoupling capacitor to GND. |+| 15 | VOUTR | output | DAC analog output for the R-channel, 0.6 VCCCI Vpp with 0.5 VCCCI center voltage, AC-coupled into a 10 kΩ load. |+| 16 | VOUTL | output | DAC analog output for the L-channel, 0.6 VCCCI Vpp with 0.5 VCCCI center voltage, AC-coupled into a 10 kΩ load. |+| 17 | VCCP1I | power_out | Internal analog power supply for the PLL, 3.1 V to 3.5 V; connect a decoupling capacitor to GND. |+| 18 | AGNDP | power_in | Analog ground for the PLL. |+| 19 | VCCP2I | power_out | Internal analog power supply for the PLL, 3.1 V to 3.5 V; connect a decoupling capacitor to GND. |+| 20 | XTO | output | Crystal oscillator output for the 12 MHz clock source. |+| 21 | XTI | input | Crystal oscillator input, 3.3-V CMOS-level input; input clock 11.994 MHz to 12.006 MHz (12 MHz nominal). |+| 22 | AGNDX | power_in | Analog ground for the oscillator. |+| 23 | VCCXI | power_out | Internal analog power supply for the oscillator, 3.1 V to 3.5 V; connect a decoupling capacitor to GND. |+| 24 | DIN | input | S/PDIF input; 3.3-V CMOS-level input with internal pulldown, 5-V tolerant. | | 25 | DOUT | output | S/PDIF output. | | 26 | DGND | power_in | Digital ground. |-| 27 | VDDI | power_out | Internal digital power supply (about 3.3 V); connect a decoupling capacitor to GND. |-| 28 | SSPND | output | Suspend flag, active-low (Low: suspend, High: operational). |+| 27 | VDDI | power_out | Internal digital power supply, 3.1 V to 3.5 V; connect a decoupling capacitor to GND. |+| 28 | SSPND | output | Suspend flag, active-low (Low: suspend, High: operational); outputs VOH 2.8 V minimum and VOL 0.3 V to 0.5 V depending on load. |  ## Key specifications @@ -52,61 +52,66 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply voltage | VBUS | -0.3 |  | 6.5 | V |  | 2 |-| Ground voltage differences |  | -0.1 |  | 0.1 | V | AGNDC, AGNDP, AGNDX, DGND, DGNDU | 2 |-| Digital input voltage SEL0, SEL1, DIN |  | -0.3 |  | 6.5 | V | SEL0, SEL1, DIN | 2 |-| Digital input voltage D+, D-, HID0-2, XTI, XTO, DOUT, SSPND |  | -0.3 |  | 4 | V | -0.3 to (VDDI + 0.3) < 4 | 2 |-| Analog input voltage VINL, VINR, VCOM, VOUTR, VOUTL |  | -0.3 |  | 4 | V | -0.3 to (VCCCI + 0.3) < 4 | 2 |-| Supply voltage VCCCI, VCCP1I, VCCP2I, VCCXI, VDDI |  | -0.3 |  | 4 | V |  | 2 |+| Supply voltage, VBUS |  | -0.3 |  | 6.5 | V |  | 2 |+| Ground voltage differences, AGNDC, AGNDP, AGNDX, DGND, DGNDU |  | -0.1 |  | 0.1 | V |  | 2 |+| Digital input voltage, SEL0, SEL1, DIN | V | -0.3 |  | 6.5 | V |  | 2 |+| Digital input voltage, D+, D-, HID0, HID1, HID2, XTI, XTO, DOUT, SSPND | V | -0.3 |  | 4 | V | Printed max is (VDDI + 0.3) < 4 | 2 |+| Analog input voltage, VINL, VINR, VCOM, VOUTR, VOUTL | V | -0.3 |  | 4 | V | Printed max is (VCCCI + 0.3) < 4 | 2 |+| Supply voltage, VCCCI, VCCP1I, VCCP2I, VCCXI, VDDI |  | -0.3 |  | 4 | V |  | 2 | | Input current (any pins except supplies) |  | -10 |  | 10 | mA |  | 2 | | Ambient temperature under bias |  | -40 |  | 125 | °C |  | 2 | | Storage temperature | Tstg | -55 |  | 150 | °C |  | 2 | | Junction temperature | TJ |  |  | 150 | °C |  | 2 |-| Lead temperature (soldering, 5s) |  |  |  | 260 | °C |  | 2 |-| Package temperature (IR reflow, peak) |  |  |  | 250 | °C |  | 2 |-| Input logic level high (D+, D-) | VIH | 2 |  | 3.3 | VDC | Pins 1, 2 | 3 |-| Input logic level low (D+, D-) | VIL |  |  | 0.8 | VDC | Pins 1, 2 | 3 |-| Input logic level high (XTI) | VIH | 2.52 |  | 3.3 | VDC | Pin 21 | 3 |-| Input logic level low (XTI) | VIL |  |  | 0.9 | VDC | Pin 21 | 3 |-| Input logic level high (SEL0, SEL1) | VIH | 2 |  | 5.25 | VDC | Pins 8, 9 | 3 |-| Input logic level low (SEL0, SEL1) | VIL |  |  | 0.8 | VDC | Pins 8, 9 | 3 |-| Input logic level high (DIN) | VIH | 2.52 |  | 5.25 | VDC | Pin 24 | 3 |-| Input logic level low (DIN) | VIL |  |  | 0.9 | VDC | Pin 24 | 3 |-| Input logic current high (D+, D-, XTI, SEL0, SEL1) | IIH | -10 |  | 10 | μA | VIN = 3.3 V | 3 |-| Input logic current low (D+, D-, XTI, SEL0, SEL1) | IIL | -10 |  | 10 | μA | VIN = 0 V | 3 |-| Input logic current high (HID0-2) | IIH |  | 50 | 80 | μA | VIN = 3.3 V | 3 |-| Input logic current low (HID0-2) | IIL | -10 |  | 10 | μA | VIN = 0 V | 3 |-| Input logic current high (DIN) | IIH |  | 65 | 100 | μA | VIN = 3.3 V | 3 |-| Input logic current low (DIN) | IIL | -10 |  | 10 | μA | VIN = 0 V | 3 |-| Output logic level high (D+, D-) | VOH | 2.8 |  |  | VDC |  | 3 |-| Output logic level low (D+, D-) | VOL |  |  | 0.3 | VDC |  | 3 |-| Output logic level high (DOUT) | VOH | 2.8 |  |  | VDC | IOH = -4 mA | 3 |-| Output logic level low (DOUT) | VOL |  |  | 0.5 | VDC | IOL = 4 mA | 3 |-| Output logic level high (SSPND) | VOH | 2.8 |  |  | VDC | IOH = -2 mA | 3 |-| Output logic level low (SSPND) | VOL |  |  | 0.5 | VDC | IOL = 2 mA | 3 |+| Lead temperature (soldering, 5 s) |  |  |  | 260 | °C | Soldering, 5 s | 2 |+| Package temperature (IR reflow, peak) |  |  |  | 250 | °C | IR reflow, peak | 2 |+| Digital input high voltage, pins 1, 2 (D+, D-) | VIH | 2 |  | 3.3 | VDC | Footnote (1): pins 1, 2 D+, D- | 3 |+| Digital input low voltage, pins 1, 2 (D+, D-) | VIL |  |  | 0.8 | VDC | Footnote (1): pins 1, 2 D+, D- | 3 |+| Digital input high voltage, XTI and HID0-HID2 | VIH | 2.52 |  | 3.3 | VDC | Footnote (2) pin 21 XTI; footnote (3) pins 5, 6, 7 HID0-HID2 | 3 |+| Digital input low voltage, XTI and HID0-HID2 | VIL |  |  | 0.9 | VDC | Footnote (2) pin 21 XTI; footnote (3) pins 5, 6, 7 HID0-HID2 | 3 |+| Digital input high voltage, SEL0, SEL1 | VIH | 2 |  | 5.25 | VDC | Footnote (4): pins 8, 9 SEL0, SEL1 | 3 |+| Digital input low voltage, SEL0, SEL1 | VIL |  |  | 0.8 | VDC | Footnote (4): pins 8, 9 SEL0, SEL1 | 3 |+| Digital input high voltage, DIN | VIH | 2.52 |  | 5.25 | VDC | Footnote (5): pin 24 DIN | 3 |+| Digital input low voltage, DIN | VIL |  |  | 0.9 | VDC | Footnote (5): pin 24 DIN | 3 |+| Input logic current high, pins 1, 2, 8, 9 | IIH | -10 |  | 10 | μA | VIN = 3.3 V | 3 |+| Input logic current low, pins 1, 2, 8, 9 | IIL | -10 |  | 10 | μA | VIN = 0 V | 3 |+| Input logic current high, pins 5, 6, 7 | IIH | 50 |  | 80 | μA | VIN = 3.3 V | 3 |+| Input logic current low, pins 5, 6, 7 | IIL | -10 |  | 10 | μA | VIN = 0 V | 3 |+| Input logic current high, pin 24 DIN | IIH | 65 |  | 100 | μA | VIN = 3.3 V | 3 |+| Input logic current low, pin 24 DIN | IIL | -10 |  | 10 | μA | VIN = 0 V | 3 |+| Output logic high voltage, pins 1, 2 | VOH | 2.8 |  |  | VDC | Footnote (1): pins 1, 2 D+, D- | 3 |+| Output logic low voltage, pins 1, 2 | VOL |  |  | 0.3 | VDC | Footnote (1): pins 1, 2 D+, D- | 3 |+| Output logic high voltage, pin 25 DOUT | VOH | 2.8 |  |  | VDC | IOH = -4 mA | 3 |+| Output logic low voltage, pin 25 DOUT | VOL |  |  | 0.5 | VDC | IOL = 4 mA | 3 |+| Output logic high voltage, pin 28 SSPND | VOH | 2.8 |  |  | VDC | IOH = -2 mA | 3 |+| Output logic low voltage, pin 28 SSPND | VOL |  |  | 0.5 | VDC | IOL = 2 mA | 3 | | Input clock frequency, XTI |  | 11.994 | 12 | 12.006 | MHz |  | 3 |-| ADC gain mismatch, channel-to-channel |  |  | 1 | 5 | % of FSR |  | 4 |-| ADC gain error |  |  | 2 | 10 | % of FSR |  | 4 |-| ADC THD+N | THD+N |  | 0.01 | 0.02 | % | VIN = -1 dB, VCCCI = 3.67 V, external regulator | 4 |-| ADC dynamic range |  | 81 | 89 |  | dB | A-weighted | 4 |-| ADC SNR | SNR | 81 | 89 |  | dB | A-weighted | 4 |-| ADC channel separation |  | 80 | 85 |  | dB |  | 4 |-| DAC gain mismatch, channel-to-channel |  |  | 1 | 5 | % of FSR |  | 5 |-| DAC gain error |  |  | 2 | 10 | % of FSR |  | 5 |-| DAC THD+N | THD+N |  | 0.005 | 0.016 | % | VOUT = 0 dB | 5 |-| DAC dynamic range |  | 87 | 93 |  | dB | EIAJ, A-weighted | 5 |-| DAC SNR | SNR | 90 | 96 |  | dB | EIAJ, A-weighted | 5 |-| DAC channel separation |  | 86 | 92 |  | dB |  | 5 |-| Supply voltage range | VBUS | 4.35 | 5 | 5.25 | VDC |  | 5 |-| Supply current, ADC/DAC operation |  |  | 56 | 67 | mA | ADC, DAC operation | 5 |-| Supply current, suspend mode |  |  | 250 |  | μA | Suspend mode, USB suspend state | 5 |-| Power dissipation, ADC/DAC operation | PD |  | 280 | 352 | mW | ADC, DAC operation | 5 |-| Power dissipation, suspend mode | PD |  | 1.25 |  | mW | Suspend mode, USB suspend state | 5 |-| Internal power-supply voltage |  | 3.1 | 3.3 | 3.5 | VDC | VCCCI, VCCP1I, VCCP2I, VCCXI, VDDI | 5 |+| Gain mismatch, channel-to-channel (ADC) |  | -5 | 1 | 5 | % of FSR | channel-to-channel | 4 |+| Gain error (ADC) |  | -10 | 2 | 10 | % of FSR |  | 4 |+| Bipolar zero error (ADC) |  | 0 | 0 | 0 | % of FSR |  | 4 |+| Total harmonic distortion + noise (ADC) | THD+N |  | 0.01 | 0.02 | % | VIN = -1 dB, VCCCI = 3.67 V (external regulator, footnote 9) | 4 |+| Dynamic range (ADC) |  | 81 | 89 |  | dB | A-weighted | 4 |+| Signal-to-noise ratio (ADC) | SNR | 81 | 89 |  | dB | A-weighted | 4 |+| Channel separation (ADC) |  | 80 | 85 |  | dB |  | 4 |+| Passband ripple (ADC digital filter) |  | -0.05 |  | 0.05 | dB | ADC digital filter | 4 |+| Stop-band attenuation (ADC digital filter) |  |  | -65 |  | dB | ADC digital filter | 4 |+| Gain mismatch, channel-to-channel (DAC) |  | -5 | 1 | 5 | % of FSR | channel-to-channel | 5 |+| Gain error (DAC) |  | -10 | 2 | 10 | % of FSR |  | 5 |+| Bipolar zero error (DAC) |  | -2 | 2 | 2 | % of FSR |  | 5 |+| Total harmonic distortion + noise (DAC) | THD+N |  | 0.005 | 0.016 | % | VOUT = 0 dB | 5 |+| Dynamic range (DAC) |  | 87 | 93 |  | dB | EIAJ, A-weighted | 5 |+| Signal-to-noise ratio (DAC) | SNR | 90 | 96 |  | dB | EIAJ, A-weighted | 5 |+| Channel separation (DAC) |  | 86 | 92 |  | dB |  | 5 |+| Passband ripple (DAC digital filter) |  | -0.1 |  | 0.1 | dB | DAC digital filter | 5 |+| Stop-band attenuation (DAC digital filter) |  |  | -43 |  | dB | DAC digital filter | 5 |+| VBUS voltage range |  | 4.35 | 5 | 5.25 | VDC |  | 5 |+| Supply current, ADC and DAC operation |  |  | 56 | 67 | mA | ADC, DAC operation | 5 |+| Supply current, suspend mode |  |  | 250 |  | μA | In USB suspend state | 5 |+| Power dissipation, ADC and DAC operation | PD |  | 280 | 352 | mW | ADC, DAC operation | 5 |+| Internal power-supply voltage |  | 3.1 | 3.3 | 3.5 | VDC | Pins 10, 17, 19, 23, 27: VCCCI, VCCP1I, VCCP2I, VCCXI, VDDI | 5 | | Operating temperature range |  | -25 |  | 85 | °C |  | 5 | | Junction-to-ambient thermal resistance | θJA |  | 64.5 |  | °C/W | DB (SSOP) 28 pins | 2 |-| Junction-to-case (top) thermal resistance | θJCtop |  | 24.5 |  | °C/W |  | 2 |-| Junction-to-board thermal resistance | θJB |  | 25.4 |  | °C/W |  | 2 |+| Junction-to-case (top) thermal resistance | θJCtop |  | 24.5 |  | °C/W | DB (SSOP) 28 pins | 2 |+| Junction-to-board thermal resistance | θJB |  | 25.4 |  | °C/W | DB (SSOP) 28 pins | 2 |  ## CAD (KiCad official) @@ -120,7 +125,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing:  - **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/pcm2906c.pdf) (34 pp, sha256 `62824baa1014b78d`, retrieved 2026-11-12, tier: manufacturer)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0).  [Datasheet PDF](docs/pcm2906cdbr-datasheet.pdf)
package.json+29−29
@@ -1,6 +1,6 @@ {   "slug": "pcm2906cdbr",-  "version": "0.1.0",+  "version": "0.1.1",   "type": "component",   "description": "Texas Instruments Audio Interface ICs, SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -54,7 +54,7 @@       "mouser": "595-PCM2906CDBR"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:59:27Z",+      "checked_at": "2026-11-12T08:01:31Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-PCM2906CDBRTR-ND",@@ -82,7 +82,7 @@         "number": "3",         "name": "VBUS",         "type": "power_in",-        "description": "Connect to USB power (VBUS); supply range 4.35 to 5.25 V, 5 V typical."+        "description": "Connect to USB power (VBUS); the VBUS voltage range is 4.35 V to 5.25 V with 5 V typical."       },       {         "number": "4",@@ -94,19 +94,19 @@         "number": "5",         "name": "HID0",         "type": "input",-        "description": "HID key state input (mute), active-high, 3.3-V CMOS-level input with internal pulldown."+        "description": "HID key state input (mute), active-high; 3.3-V CMOS-level input with internal pulldown."       },       {         "number": "6",         "name": "HID1",         "type": "input",-        "description": "HID key state input (volume up), active-high, 3.3-V CMOS-level input with internal pulldown."+        "description": "HID key state input (volume up), active-high; 3.3-V CMOS-level input with internal pulldown."       },       {         "number": "7",         "name": "HID2",         "type": "input",-        "description": "HID key state input (volume down), active-high, 3.3-V CMOS-level input with internal pulldown."+        "description": "HID key state input (volume down), active-high; 3.3-V CMOS-level input with internal pulldown."       },       {         "number": "8",@@ -124,91 +124,91 @@         "number": "10",         "name": "VCCCI",         "type": "power_out",-        "description": "Internal analog power supply for codec (about 3.3 V); connect a decoupling capacitor to GND."+        "description": "Internal analog power supply for the codec, 3.1 V to 3.5 V (3.3 V typical); connect a decoupling capacitor to GND."       },       {         "number": "11",         "name": "AGNDC",         "type": "power_in",-        "description": "Analog ground for codec."+        "description": "Analog ground for the codec."       },       {         "number": "12",         "name": "VINL",         "type": "input",-        "description": "ADC analog input for L-channel."+        "description": "ADC analog input for the L-channel, absolute voltage limited to -0.3 V to (VCCCI + 0.3 V) and less than 4 V."       },       {         "number": "13",         "name": "VINR",         "type": "input",-        "description": "ADC analog input for R-channel."+        "description": "ADC analog input for the R-channel, absolute voltage limited to -0.3 V to (VCCCI + 0.3 V) and less than 4 V."       },       {         "number": "14",         "name": "VCOM",         "type": "passive",-        "description": "Common for ADC/DAC (VCCCI/2); connect a decoupling capacitor to GND."+        "description": "Common node for ADC/DAC at VCCCI/2; connect a decoupling capacitor to GND."       },       {         "number": "15",         "name": "VOUTR",         "type": "output",-        "description": "DAC analog output for R-channel."+        "description": "DAC analog output for the R-channel, 0.6 VCCCI Vpp with 0.5 VCCCI center voltage, AC-coupled into a 10 kΩ load."       },       {         "number": "16",         "name": "VOUTL",         "type": "output",-        "description": "DAC analog output for L-channel."+        "description": "DAC analog output for the L-channel, 0.6 VCCCI Vpp with 0.5 VCCCI center voltage, AC-coupled into a 10 kΩ load."       },       {         "number": "17",         "name": "VCCP1I",         "type": "power_out",-        "description": "Internal analog power supply for PLL (about 3.3 V); connect a decoupling capacitor to GND."+        "description": "Internal analog power supply for the PLL, 3.1 V to 3.5 V; connect a decoupling capacitor to GND."       },       {         "number": "18",         "name": "AGNDP",         "type": "power_in",-        "description": "Analog ground for PLL."+        "description": "Analog ground for the PLL."       },       {         "number": "19",         "name": "VCCP2I",         "type": "power_out",-        "description": "Internal analog power supply for PLL (about 3.3 V); connect a decoupling capacitor to GND."+        "description": "Internal analog power supply for the PLL, 3.1 V to 3.5 V; connect a decoupling capacitor to GND."       },       {         "number": "20",         "name": "XTO",         "type": "output",-        "description": "Crystal oscillator output."+        "description": "Crystal oscillator output for the 12 MHz clock source."       },       {         "number": "21",         "name": "XTI",         "type": "input",-        "description": "Crystal oscillator input, 3.3-V CMOS level; 12 MHz clock source."+        "description": "Crystal oscillator input, 3.3-V CMOS-level input; input clock 11.994 MHz to 12.006 MHz (12 MHz nominal)."       },       {         "number": "22",         "name": "AGNDX",         "type": "power_in",-        "description": "Analog ground for oscillator."+        "description": "Analog ground for the oscillator."       },       {         "number": "23",         "name": "VCCXI",         "type": "power_out",-        "description": "Internal analog power supply for oscillator (about 3.3 V); connect a decoupling capacitor to GND."+        "description": "Internal analog power supply for the oscillator, 3.1 V to 3.5 V; connect a decoupling capacitor to GND."       },       {         "number": "24",         "name": "DIN",         "type": "input",-        "description": "S/PDIF input, 3.3-V CMOS-level with internal pulldown, 5-V tolerant."+        "description": "S/PDIF input; 3.3-V CMOS-level input with internal pulldown, 5-V tolerant."       },       {         "number": "25",@@ -226,13 +226,13 @@         "number": "27",         "name": "VDDI",         "type": "power_out",-        "description": "Internal digital power supply (about 3.3 V); connect a decoupling capacitor to GND."+        "description": "Internal digital power supply, 3.1 V to 3.5 V; connect a decoupling capacitor to GND."       },       {         "number": "28",         "name": "SSPND",         "type": "output",-        "description": "Suspend flag, active-low (Low: suspend, High: operational)."+        "description": "Suspend flag, active-low (Low: suspend, High: operational); outputs VOH 2.8 V minimum and VOL 0.3 V to 0.5 V depending on load."       }     ],     "provenance": {@@ -240,17 +240,17 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pin types for VCCCI, VCCP1I, VCCP2I, VCCXI, VDDI are inferred as power_out (internal regulator outpu; PCM2906CDBR is the tape-and-reel version of the PCM2906CDB; same 28-pin SSOP (DB) pinout."+          "extractor flagged: The datasheet gives these as internal supplies or the internal common node with decoupling requireme; KiCad ERC has no analog class. Analog inputs are typed input and analog outputs are typed output, fo; The datasheet lists D+ and D- as I/O, so I typed them bidirectional. The datasheet only specifies LV"         ],         "pages_sent": 9,-        "cost_usd": 0.1065,-        "at": "2026-11-12T04:59:16"+        "cost_usd": 0.06,+        "at": "2026-11-12T08:01:03"       },       "datasheet": {         "url": "https://www.ti.com/lit/ds/symlink/pcm2906c.pdf",@@ -305,13 +305,13 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "e77e0f33516cc04487986a0d01aec8f17ea5cdbf8d5245e70325a4f9afac060b",+        "sha256": "97816fb6a3a1632cfd69e33bc385e31c03e22b9212eeab33df60583c81fd49c8",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "DB0028A",+      "package_code": "DB0028A (SSOP-28, DB)",       "source_page": 31,       "D": {         "nom_mm": 10.2,
page.json+32−30
@@ -4,7 +4,7 @@   "slug": "pcm2906cdbr",   "title": "PCM2906CDBR",   "brief": "Texas Instruments Audio Interface ICs, SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.0",+  "version": "0.1.1",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -36,7 +36,7 @@       "mouser": "595-PCM2906CDBR"     },     "distributor_check": {-      "checked_at": "2026-11-12T04:59:27Z",+      "checked_at": "2026-11-12T08:01:31Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-PCM2906CDBRTR-ND",@@ -64,7 +64,7 @@         "number": "3",         "name": "VBUS",         "type": "power_in",-        "description": "Connect to USB power (VBUS); supply range 4.35 to 5.25 V, 5 V typical."+        "description": "Connect to USB power (VBUS); the VBUS voltage range is 4.35 V to 5.25 V with 5 V typical."       },       {         "number": "4",@@ -76,19 +76,19 @@         "number": "5",         "name": "HID0",         "type": "input",-        "description": "HID key state input (mute), active-high, 3.3-V CMOS-level input with internal pulldown."+        "description": "HID key state input (mute), active-high; 3.3-V CMOS-level input with internal pulldown."       },       {         "number": "6",         "name": "HID1",         "type": "input",-        "description": "HID key state input (volume up), active-high, 3.3-V CMOS-level input with internal pulldown."+        "description": "HID key state input (volume up), active-high; 3.3-V CMOS-level input with internal pulldown."       },       {         "number": "7",         "name": "HID2",         "type": "input",-        "description": "HID key state input (volume down), active-high, 3.3-V CMOS-level input with internal pulldown."+        "description": "HID key state input (volume down), active-high; 3.3-V CMOS-level input with internal pulldown."       },       {         "number": "8",@@ -106,91 +106,91 @@         "number": "10",         "name": "VCCCI",         "type": "power_out",-        "description": "Internal analog power supply for codec (about 3.3 V); connect a decoupling capacitor to GND."+        "description": "Internal analog power supply for the codec, 3.1 V to 3.5 V (3.3 V typical); connect a decoupling capacitor to GND."       },       {         "number": "11",         "name": "AGNDC",         "type": "power_in",-        "description": "Analog ground for codec."+        "description": "Analog ground for the codec."       },       {         "number": "12",         "name": "VINL",         "type": "input",-        "description": "ADC analog input for L-channel."+        "description": "ADC analog input for the L-channel, absolute voltage limited to -0.3 V to (VCCCI + 0.3 V) and less than 4 V."       },       {         "number": "13",         "name": "VINR",         "type": "input",-        "description": "ADC analog input for R-channel."+        "description": "ADC analog input for the R-channel, absolute voltage limited to -0.3 V to (VCCCI + 0.3 V) and less than 4 V."       },       {         "number": "14",         "name": "VCOM",         "type": "passive",-        "description": "Common for ADC/DAC (VCCCI/2); connect a decoupling capacitor to GND."+        "description": "Common node for ADC/DAC at VCCCI/2; connect a decoupling capacitor to GND."       },       {         "number": "15",         "name": "VOUTR",         "type": "output",-        "description": "DAC analog output for R-channel."+        "description": "DAC analog output for the R-channel, 0.6 VCCCI Vpp with 0.5 VCCCI center voltage, AC-coupled into a 10 kΩ load."       },       {         "number": "16",         "name": "VOUTL",         "type": "output",-        "description": "DAC analog output for L-channel."+        "description": "DAC analog output for the L-channel, 0.6 VCCCI Vpp with 0.5 VCCCI center voltage, AC-coupled into a 10 kΩ load."       },       {         "number": "17",         "name": "VCCP1I",         "type": "power_out",-        "description": "Internal analog power supply for PLL (about 3.3 V); connect a decoupling capacitor to GND."+        "description": "Internal analog power supply for the PLL, 3.1 V to 3.5 V; connect a decoupling capacitor to GND."       },       {         "number": "18",         "name": "AGNDP",         "type": "power_in",-        "description": "Analog ground for PLL."+        "description": "Analog ground for the PLL."       },       {         "number": "19",         "name": "VCCP2I",         "type": "power_out",-        "description": "Internal analog power supply for PLL (about 3.3 V); connect a decoupling capacitor to GND."+        "description": "Internal analog power supply for the PLL, 3.1 V to 3.5 V; connect a decoupling capacitor to GND."       },       {         "number": "20",         "name": "XTO",         "type": "output",-        "description": "Crystal oscillator output."+        "description": "Crystal oscillator output for the 12 MHz clock source."       },       {         "number": "21",         "name": "XTI",         "type": "input",-        "description": "Crystal oscillator input, 3.3-V CMOS level; 12 MHz clock source."+        "description": "Crystal oscillator input, 3.3-V CMOS-level input; input clock 11.994 MHz to 12.006 MHz (12 MHz nominal)."       },       {         "number": "22",         "name": "AGNDX",         "type": "power_in",-        "description": "Analog ground for oscillator."+        "description": "Analog ground for the oscillator."       },       {         "number": "23",         "name": "VCCXI",         "type": "power_out",-        "description": "Internal analog power supply for oscillator (about 3.3 V); connect a decoupling capacitor to GND."+        "description": "Internal analog power supply for the oscillator, 3.1 V to 3.5 V; connect a decoupling capacitor to GND."       },       {         "number": "24",         "name": "DIN",         "type": "input",-        "description": "S/PDIF input, 3.3-V CMOS-level with internal pulldown, 5-V tolerant."+        "description": "S/PDIF input; 3.3-V CMOS-level input with internal pulldown, 5-V tolerant."       },       {         "number": "25",@@ -208,13 +208,13 @@         "number": "27",         "name": "VDDI",         "type": "power_out",-        "description": "Internal digital power supply (about 3.3 V); connect a decoupling capacitor to GND."+        "description": "Internal digital power supply, 3.1 V to 3.5 V; connect a decoupling capacitor to GND."       },       {         "number": "28",         "name": "SSPND",         "type": "output",-        "description": "Suspend flag, active-low (Low: suspend, High: operational)."+        "description": "Suspend flag, active-low (Low: suspend, High: operational); outputs VOH 2.8 V minimum and VOL 0.3 V to 0.5 V depending on load."       }     ],     "provenance": {@@ -222,17 +222,17 @@       "factory_chain": {         "factory": "2.0.0",         "extractor": "extract_pins 0.3",-        "primary_model": "claude-sonnet-5-5",+        "primary_model": "claude-haiku-5-5",         "primary_mode": "text",         "consensus_model": "claude-sonnet-5-5",         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: Pin types for VCCCI, VCCP1I, VCCP2I, VCCXI, VDDI are inferred as power_out (internal regulator outpu; PCM2906CDBR is the tape-and-reel version of the PCM2906CDB; same 28-pin SSOP (DB) pinout."+          "extractor flagged: The datasheet gives these as internal supplies or the internal common node with decoupling requireme; KiCad ERC has no analog class. Analog inputs are typed input and analog outputs are typed output, fo; The datasheet lists D+ and D- as I/O, so I typed them bidirectional. The datasheet only specifies LV"         ],         "pages_sent": 9,-        "cost_usd": 0.1065,-        "at": "2026-11-12T04:59:16"+        "cost_usd": 0.06,+        "at": "2026-11-12T08:01:03"       },       "datasheet": {         "url": "https://www.ti.com/lit/ds/symlink/pcm2906c.pdf",@@ -287,13 +287,13 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "e77e0f33516cc04487986a0d01aec8f17ea5cdbf8d5245e70325a4f9afac060b",+        "sha256": "97816fb6a3a1632cfd69e33bc385e31c03e22b9212eeab33df60583c81fd49c8",         "checked": "2026-11-12",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],     "package_dims": {-      "package_code": "DB0028A",+      "package_code": "DB0028A (SSOP-28, DB)",       "source_page": 31,       "D": {         "nom_mm": 10.2,@@ -1055,5 +1055,7 @@   ],   "visibility": {     "public": true-  }+  },+  "description": "Texas Instruments Audio Interface ICs, SSOP-28. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file
pcm2906cdbr-hero.overlay.json+703−698
@@ -1,700 +1,705 @@ {-  "spec": "adom-hero 1.4",-  "mpn": "PCM2906CDBR",-  "kind": "component + footprint reference art",-  "board_use": false,-  "plane_z_mm": -0.02,-  "units": "metre",-  "upAxis": "Z",-  "layers": {-    "pad_outlines": {-      "material": "Footprint pads - teal dashed outlines - 50 percent opacity",-      "rgba": [-        0.0,-        0.902,-        0.863,-        0.5-      ],-      "pads": 28,-      "span_mm": 8.9,-      "dash_mm": 0.2225,-      "gap_mm": 0.1335,-      "pad_stroke_mm": 0.0534-    },-    "silkscreen": {-      "material": "Silkscreen reference lines - 30 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.3-      ],-      "footprint_items": 7,-      "pin1": {-        "source": "footprint silkscreen",-        "pad": "1"-      }-    },-    "signal_names": {-      "material": "Signal names - 50 percent opacity",-      "rgba": [-        0.92,-        0.96,-        1.0,-        0.5-      ],-      "font": "DejaVu Sans Mono",-      "labels": 28,-      "sides": "top + mirrored underside (single-sided)",-      "fallback_to_pad_number": 0-    }-  },-  "align": {-    "ok": true,-    "centre_offset_mm": 0.0,-    "tolerance_mm": 0.712,-    "orientation_flipped": false,-    "contacts_bbox_mm": [-      -3.9,-      3.9,-      -4.906,-      4.906-    ],-    "pads_bbox_mm": [-      -4.45,-      4.45,-      -4.425,-      4.425-    ],-    "seating_z_mm": 0.0-  },-  "sources": {-    "glb": "pcm2906cdbr-etched.glb",-    "glb_sha256": "c33a2dedbd0b806e5f98daa7066310295f7b6202d9876cc6e1416a4c53fc2612",-    "footprint": "pcm2906cdbr.kicad_mod",-    "footprint_sha256": "bbb0d0449b996c0ad096ca837fee38110e319360b863de5c7df6a964f6140d98",-    "pins": "page.json component.pins",-    "pins_sha256": "a4de833fe50a60ee29504520b7bba4f55c3cf97e1cd6e7380457493944a9b9b0"-  },-  "generator": "adom-wiki 1.8.22 (component_hero)",-  "labels": [-    {-      "pad": "1",-      "text": "D+",-      "x": -4.55,-      "y": -4.225,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "2",-      "text": "D–",-      "x": -4.55,-      "y": -3.575,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "3",-      "text": "VBUS",-      "x": -4.55,-      "y": -2.925,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "4",-      "text": "DGNDU",-      "x": -4.55,-      "y": -2.275,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "5",-      "text": "HID0",-      "x": -4.55,-      "y": -1.625,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "6",-      "text": "HID1",-      "x": -4.55,-      "y": -0.975,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "7",-      "text": "HID2",-      "x": -4.55,-      "y": -0.325,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "8",-      "text": "SEL0",-      "x": -4.55,-      "y": 0.325,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "9",-      "text": "SEL1",-      "x": -4.55,-      "y": 0.975,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "10",-      "text": "VCCCI",-      "x": -4.55,-      "y": 1.625,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "11",-      "text": "AGNDC",-      "x": -4.55,-      "y": 2.275,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "12",-      "text": "VINL",-      "x": -4.55,-      "y": 2.925,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "13",-      "text": "VINR",-      "x": -4.55,-      "y": 3.575,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "14",-      "text": "VCOM",-      "x": -4.55,-      "y": 4.225,-      "align": "right",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "15",-      "text": "VOUTR",-      "x": 4.55,-      "y": 4.225,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "16",-      "text": "VOUTL",-      "x": 4.55,-      "y": 3.575,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "17",-      "text": "VCCP1I",-      "x": 4.55,-      "y": 2.925,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "18",-      "text": "AGNDP",-      "x": 4.55,-      "y": 2.275,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "19",-      "text": "VCCP2I",-      "x": 4.55,-      "y": 1.625,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "20",-      "text": "XTO",-      "x": 4.55,-      "y": 0.975,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "21",-      "text": "XTI",-      "x": 4.55,-      "y": 0.325,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "22",-      "text": "AGNDX",-      "x": 4.55,-      "y": -0.325,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "23",-      "text": "VCCXI",-      "x": 4.55,-      "y": -0.975,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "24",-      "text": "DIN",-      "x": 4.55,-      "y": -1.625,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "25",-      "text": "DOUT",-      "x": 4.55,-      "y": -2.275,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "26",-      "text": "DGND",-      "x": 4.55,-      "y": -2.925,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "27",-      "text": "VDDI",-      "x": 4.55,-      "y": -3.575,-      "align": "left",-      "vertical": false,-      "h": 0.325-    },-    {-      "pad": "28",-      "text": "SSPND",-      "x": 4.55,-      "y": -4.225,-      "align": "left",-      "vertical": false,-      "h": 0.325-    }+ "spec": "adom-hero 1.4",+ "mpn": "PCM2906CDBR",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+  "pad_outlines": {+   "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+   "rgba": [+    0.0,+    0.902,+    0.863,+    0.5+   ],+   "pads": 28,+   "span_mm": 8.9,+   "dash_mm": 0.2225,+   "gap_mm": 0.1335,+   "pad_stroke_mm": 0.0534+  },+  "silkscreen": {+   "material": "Silkscreen reference lines - 30 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.3+   ],+   "footprint_items": 7,+   "pin1": {+    "source": "footprint silkscreen",+    "pad": "1"+   }+  },+  "signal_names": {+   "material": "Signal names - 50 percent opacity",+   "rgba": [+    0.92,+    0.96,+    1.0,+    0.5+   ],+   "font": "DejaVu Sans Mono",+   "labels": 28,+   "sides": "top + mirrored underside (single-sided)",+   "omitted": null,+   "fallback_to_pad_number": 0+  }+ },+ "align": {+  "ok": true,+  "board_underside": true,+  "electrical_pads_without_contact": [],+  "mounting_pads_left_out": [],+  "centre_offset_mm": 0.0,+  "over_pads": true,+  "tolerance_mm": 0.712,+  "orientation_flipped": false,+  "contacts_bbox_mm": [+   -3.9,+   3.9,+   -4.906,+   4.906   ],-  "pads": [-    {-      "number": "1",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -4.225-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "2",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -3.575-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "3",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -2.925-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "4",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -2.275-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "5",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -1.625-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "6",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -0.975-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "7",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        -0.325-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "8",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        0.325-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "9",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        0.975-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "10",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        1.625-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "11",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        2.275-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "12",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        2.925-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "13",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        3.575-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "14",-      "shape": "roundrect",-      "center_mm": [-        -3.5,-        4.225-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "15",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        4.225-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "16",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        3.575-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "17",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        2.925-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "18",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        2.275-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "19",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        1.625-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "20",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        0.975-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "21",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        0.325-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "22",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -0.325-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "23",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -0.975-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "24",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -1.625-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "25",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -2.275-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "26",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -2.925-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "27",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -3.575-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    },-    {-      "number": "28",-      "shape": "roundrect",-      "center_mm": [-        3.5,-        -4.225-      ],-      "size_mm": [-        1.9,-        0.4-      ],-      "rot": 0.0-    }-  ]-}+  "pads_bbox_mm": [+   -4.45,+   4.45,+   -4.425,+   4.425+  ],+  "seating_z_mm": 0.0+ },+ "sources": {+  "glb": "pcm2906cdbr-etched.glb",+  "glb_sha256": "c33a2dedbd0b806e5f98daa7066310295f7b6202d9876cc6e1416a4c53fc2612",+  "footprint": "pcm2906cdbr.kicad_mod",+  "footprint_sha256": "bbb0d0449b996c0ad096ca837fee38110e319360b863de5c7df6a964f6140d98",+  "pins": "page.json component.pins",+  "pins_sha256": "a4de833fe50a60ee29504520b7bba4f55c3cf97e1cd6e7380457493944a9b9b0"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+  {+   "pad": "1",+   "text": "D+",+   "x": -4.55,+   "y": -4.225,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "2",+   "text": "D\u2013",+   "x": -4.55,+   "y": -3.575,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "3",+   "text": "VBUS",+   "x": -4.55,+   "y": -2.925,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "4",+   "text": "DGNDU",+   "x": -4.55,+   "y": -2.275,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "5",+   "text": "HID0",+   "x": -4.55,+   "y": -1.625,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "6",+   "text": "HID1",+   "x": -4.55,+   "y": -0.975,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "7",+   "text": "HID2",+   "x": -4.55,+   "y": -0.325,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "8",+   "text": "SEL0",+   "x": -4.55,+   "y": 0.325,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "9",+   "text": "SEL1",+   "x": -4.55,+   "y": 0.975,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "10",+   "text": "VCCCI",+   "x": -4.55,+   "y": 1.625,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "11",+   "text": "AGNDC",+   "x": -4.55,+   "y": 2.275,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "12",+   "text": "VINL",+   "x": -4.55,+   "y": 2.925,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "13",+   "text": "VINR",+   "x": -4.55,+   "y": 3.575,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "14",+   "text": "VCOM",+   "x": -4.55,+   "y": 4.225,+   "align": "right",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "15",+   "text": "VOUTR",+   "x": 4.55,+   "y": 4.225,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "16",+   "text": "VOUTL",+   "x": 4.55,+   "y": 3.575,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "17",+   "text": "VCCP1I",+   "x": 4.55,+   "y": 2.925,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "18",+   "text": "AGNDP",+   "x": 4.55,+   "y": 2.275,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "19",+   "text": "VCCP2I",+   "x": 4.55,+   "y": 1.625,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "20",+   "text": "XTO",+   "x": 4.55,+   "y": 0.975,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "21",+   "text": "XTI",+   "x": 4.55,+   "y": 0.325,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "22",+   "text": "AGNDX",+   "x": 4.55,+   "y": -0.325,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "23",+   "text": "VCCXI",+   "x": 4.55,+   "y": -0.975,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "24",+   "text": "DIN",+   "x": 4.55,+   "y": -1.625,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "25",+   "text": "DOUT",+   "x": 4.55,+   "y": -2.275,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "26",+   "text": "DGND",+   "x": 4.55,+   "y": -2.925,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "27",+   "text": "VDDI",+   "x": 4.55,+   "y": -3.575,+   "align": "left",+   "vertical": false,+   "h": 0.325+  },+  {+   "pad": "28",+   "text": "SSPND",+   "x": 4.55,+   "y": -4.225,+   "align": "left",+   "vertical": false,+   "h": 0.325+  }+ ],+ "pads": [+  {+   "number": "1",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -4.225+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "2",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -3.575+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "3",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -2.925+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "4",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -2.275+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "5",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -1.625+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "6",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -0.975+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "7",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    -0.325+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "8",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    0.325+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "9",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    0.975+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "10",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    1.625+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "11",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    2.275+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "12",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    2.925+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "13",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    3.575+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "14",+   "shape": "roundrect",+   "center_mm": [+    -3.5,+    4.225+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "15",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    4.225+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "16",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    3.575+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "17",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    2.925+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "18",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    2.275+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "19",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    1.625+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "20",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    0.975+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "21",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    0.325+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "22",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -0.325+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "23",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -0.975+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "24",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -1.625+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "25",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -2.275+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "26",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -2.925+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "27",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -3.575+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  },+  {+   "number": "28",+   "shape": "roundrect",+   "center_mm": [+    3.5,+    -4.225+   ],+   "size_mm": [+    1.9,+    0.4+   ],+   "rot": 0.0+  }+ ]+}\ No newline at end of file