main
Ray
Publish 0.1.0
e1da72f
PCM2903CDB
Texas Instruments · Audio Interface ICs · SSOP-28-208mil
PCM2903CDB from Texas Instruments, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D+ | bidirectional | USB differential input/output plus at LV-TTL level. |
| 2 | D- | bidirectional | USB differential input/output minus at LV-TTL level. |
| 3 | VBUS | power_in | Must be connected to VDD. |
| 4 | DGNDU | power_in | Digital ground for the USB transceiver. |
| 5 | HID0 | input | HID key state input (mute), active-high, 3.3-V CMOS-level input with internal pulldown. |
| 6 | HID1 | input | HID key state input (volume up), active-high, 3.3-V CMOS-level input with internal pulldown. |
| 7 | HID2 | input | HID key state input (volume down), active-high, 3.3-V CMOS-level input with internal pulldown. |
| 8 | SEL0 | input | Must be set to high; TTL Schmitt trigger input, 5-V tolerant. |
| 9 | SEL1 | input | Connected to the USB port of VBUS; TTL Schmitt trigger input, 5-V tolerant. |
| 10 | VCCC | power_in | Analog power supply for the codec; connect a decoupling capacitor to GND. |
| 11 | AGNDC | power_in | Analog ground for the codec. |
| 12 | VINL | input | ADC analog input for the L-channel. |
| 13 | VINR | input | ADC analog input for the R-channel. |
| 14 | VCOM | passive | Common for ADC/DAC at VCCC/2; connect a decoupling capacitor to GND. |
| 15 | VOUTR | output | DAC analog output for the R-channel. |
| 16 | VOUTL | output | DAC analog output for the L-channel. |
| 17 | VCCP1 | power_in | Analog power supply for the PLL; connect a decoupling capacitor to GND. |
| 18 | AGNDP | power_in | Analog ground for the PLL. |
| 19 | VCCP2 | power_in | Analog power supply for the PLL; connect a decoupling capacitor to GND. |
| 20 | XTO | output | Crystal oscillator output. |
| 21 | XTI | input | Crystal oscillator input, 3.3-V CMOS-level input. |
| 22 | AGNDX | power_in | Analog ground for the oscillator. |
| 23 | VCCX | power_in | Analog power supply for the oscillator; connect a decoupling capacitor to GND. |
| 24 | DIN | input | S/PDIF input, 3.3-V CMOS-level input with internal pulldown, 5-V tolerant. |
| 25 | DOUT | output | S/PDIF output. |
| 26 | DGND | power_in | Digital ground. |
| 27 | VDD | power_in | Digital power supply; connect a decoupling capacitor to GND. |
| 28 | SSPND | output | Suspend flag, active-low (Low: suspend, High: operational). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-28-208mil |
| Category | Interface |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCCC, VCCP1, VCCP2, VCCX, VDD | -0.3 | 4 | V | 5 | |||
| Supply voltage differences VCCC, VCCP1, VCCP2, VCCX, VDD | -0.1 | 0.1 | V | 5 | |||
| Ground voltage differences AGNDC, AGNDP, AGNDX, DGND, DGNDU | -0.1 | 0.1 | V | 5 | |||
| Digital input voltage SEL0, SEL1, DIN | -0.3 | 6.5 | V | 5 | |||
| Digital input voltage D+, D-, HID0, HID1, HID2, XTI, XTO, DOUT, SSPND | -0.3 | V | max (VDD + 0.3) and < 4 V | 5 | |||
| Analog input voltage VINL, VINR, VCOM, VOUTR, VOUTL | -0.3 | V | max (VCCC + 0.3) and < 4 V | 5 | |||
| Input current (any pins except supplies) | -10 | 10 | mA | 5 | |||
| Ambient temperature under bias | -40 | 125 | °C | 5 | |||
| Junction temperature | TJ | 150 | °C | 5 | |||
| Lead temperature (soldering, 5 s) | 260 | °C | soldering, 5 s | 5 | |||
| Package temperature (IR reflow, peak) | 250 | °C | IR reflow, peak | 5 | |||
| Storage temperature | Tstg | -55 | 150 | °C | 5 | ||
| Supply voltage | 3 | 3.3 | 3.6 | V | 5 | ||
| Supply current ADC, DAC operation | 54 | 70 | mA | ADC, DAC operation | 5 | ||
| USB suspend state supply current | 250 | µA | USB suspend state | 5 | |||
| Ambient temperature | 0 | 25 | 85 | °C | 5 | ||
| Junction-to-ambient thermal resistance | RθJA | 64.5 | °C/W | 5 | |||
| Junction-to-case (top) thermal resistance | RθJC(top) | 24.5 | °C/W | 5 | |||
| Junction-to-board thermal resistance | RθJB | 25.4 | °C/W | 5 | |||
| Junction-to-top characterization parameter | ψJT | 2 | °C/W | 5 | |||
| Junction-to-board characterization parameter | ψJB | 25 | °C/W | 5 | |||
| High-level input voltage D+, D- | VIH | 2 | V | D+, D-; max VDD | 6 | ||
| High-level input voltage SEL0, SEL1 | VIH | 2 | 5.25 | V | SEL0, SEL1 | 6 | |
| High-level input voltage DIN | VIH | 5.25 | V | DIN | 6 | ||
| Low-level input voltage D+, D- | VIL | 0.8 | V | D+, D- | 6 | ||
| Low-level input voltage SEL0, SEL1 | VIL | 0.8 | V | SEL0, SEL1 | 6 | ||
| High-level input current D+, D-, XTI, SEL0, SEL1, HID0, HID1, HID2 | IIH | -10 | 10 | µA | VIN = 3.3 V | 6 | |
| High-level input current HID0, HID1, HID2 | IIH | 50 | 80 | µA | VIN = 3.3 V | 6 | |
| High-level input current DIN | IIH | 65 | 100 | µA | VIN = 3.3 V | 6 | |
| Low-level input current D+, D-, XTI, SEL0, SEL1, HID0, HID1, HID2, DIN | IIL | -10 | 10 | µA | VIN = 0 V | 6 | |
| High-level output voltage D+, D-, DOUT | VOH | 2.8 | V | IOH = -4 mA | 6 | ||
| High-level output voltage SSPND | VOH | 2.8 | V | IOH = -2 mA | 6 | ||
| Low-level output voltage D+, D- | VOL | 0.3 | V | 6 | |||
| Low-level output voltage DOUT | VOL | 0.5 | V | IOL = 4 mA | 6 | ||
| Low-level output voltage SSPND | VOL | 0.5 | V | IOL = 2 mA | 6 | ||
| Input clock frequency XTI | 11.994 | 12 | 12.006 | MHz | 6 | ||
| ADC gain mismatch, channel-to-channel | -5 | 5 | % of FSR | 6 | |||
| ADC gain error | -10 | 10 | % of FSR | 6 | |||
| ADC THD+N | THD+N | 0.01 | 0.02 | % | VIN = -1 dB | 6 | |
| ADC dynamic range | 81 | 89 | dB | A-weighted | 7 | ||
| ADC SNR | SNR | 81 | 89 | dB | A-weighted | 7 | |
| ADC channel separation | 80 | 85 | dB | 7 | |||
| ADC passband ripple | -0.05 | 0.05 | dB | 7 | |||
| DAC gain mismatch, channel-to-channel | -5 | 5 | % of FSR | 7 | |||
| DAC gain error | -10 | 10 | % of FSR | 7 | |||
| DAC bipolar zero error | -2 | 2 | % of FSR | 7 | |||
| DAC THD+N | THD+N | 0.005 | 0.016 | % | VOUT = 0 dB | 7 | |
| DAC dynamic range | 87 | 93 | dB | EIAJ, A-weighted | 7 | ||
| DAC SNR | SNR | 90 | 96 | dB | EIAJ, A-weighted | 7 | |
| DAC channel separation | 86 | 92 | dB | 7 | |||
| DAC passband ripple | -0.1 | 0.1 | dB | 7 | |||
| Supply voltage range VDD, VCCC, VCCP1, VCCP2, VCCX | 3 | 3.3 | 3.6 | V | VDD, VCCC, VCCP1, VCCP2, VCCX | 8 | |
| Supply current ADC, DAC operation | 54 | 70 | mA | ADC, DAC operation | 8 | ||
| Supply current suspend mode | 250 | µA | Suspend mode | 8 | |||
| Power dissipation ADC, DAC operation | PD | 178 | 252 | mW | ADC, DAC operation | 8 | |
| Operating temperature range | -25 | 85 | °C | 8 |
CAD (KiCad official)
- Symbol:
PCM2903CDB - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pcm2903cdb-etched.step/pcm2903cdb-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pcm2903cdb.step/pcm2903cdb.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
f4aae6d56c023551, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# PCM2903CDB
**Texas Instruments** · Audio Interface ICs · SSOP-28-208mil
PCM2903CDB from Texas Instruments, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | D+ | bidirectional | USB differential input/output plus at LV-TTL level. |
| 2 | D- | bidirectional | USB differential input/output minus at LV-TTL level. |
| 3 | VBUS | power_in | Must be connected to VDD. |
| 4 | DGNDU | power_in | Digital ground for the USB transceiver. |
| 5 | HID0 | input | HID key state input (mute), active-high, 3.3-V CMOS-level input with internal pulldown. |
| 6 | HID1 | input | HID key state input (volume up), active-high, 3.3-V CMOS-level input with internal pulldown. |
| 7 | HID2 | input | HID key state input (volume down), active-high, 3.3-V CMOS-level input with internal pulldown. |
| 8 | SEL0 | input | Must be set to high; TTL Schmitt trigger input, 5-V tolerant. |
| 9 | SEL1 | input | Connected to the USB port of VBUS; TTL Schmitt trigger input, 5-V tolerant. |
| 10 | VCCC | power_in | Analog power supply for the codec; connect a decoupling capacitor to GND. |
| 11 | AGNDC | power_in | Analog ground for the codec. |
| 12 | VINL | input | ADC analog input for the L-channel. |
| 13 | VINR | input | ADC analog input for the R-channel. |
| 14 | VCOM | passive | Common for ADC/DAC at VCCC/2; connect a decoupling capacitor to GND. |
| 15 | VOUTR | output | DAC analog output for the R-channel. |
| 16 | VOUTL | output | DAC analog output for the L-channel. |
| 17 | VCCP1 | power_in | Analog power supply for the PLL; connect a decoupling capacitor to GND. |
| 18 | AGNDP | power_in | Analog ground for the PLL. |
| 19 | VCCP2 | power_in | Analog power supply for the PLL; connect a decoupling capacitor to GND. |
| 20 | XTO | output | Crystal oscillator output. |
| 21 | XTI | input | Crystal oscillator input, 3.3-V CMOS-level input. |
| 22 | AGNDX | power_in | Analog ground for the oscillator. |
| 23 | VCCX | power_in | Analog power supply for the oscillator; connect a decoupling capacitor to GND. |
| 24 | DIN | input | S/PDIF input, 3.3-V CMOS-level input with internal pulldown, 5-V tolerant. |
| 25 | DOUT | output | S/PDIF output. |
| 26 | DGND | power_in | Digital ground. |
| 27 | VDD | power_in | Digital power supply; connect a decoupling capacitor to GND. |
| 28 | SSPND | output | Suspend flag, active-low (Low: suspend, High: operational). |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-28-208mil |
| Category | Interface |
| Pins | 28 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCCC, VCCP1, VCCP2, VCCX, VDD | | -0.3 | | 4 | V | | 5 |
| Supply voltage differences VCCC, VCCP1, VCCP2, VCCX, VDD | | -0.1 | | 0.1 | V | | 5 |
| Ground voltage differences AGNDC, AGNDP, AGNDX, DGND, DGNDU | | -0.1 | | 0.1 | V | | 5 |
| Digital input voltage SEL0, SEL1, DIN | | -0.3 | | 6.5 | V | | 5 |
| Digital input voltage D+, D-, HID0, HID1, HID2, XTI, XTO, DOUT, SSPND | | -0.3 | | | V | max (VDD + 0.3) and < 4 V | 5 |
| Analog input voltage VINL, VINR, VCOM, VOUTR, VOUTL | | -0.3 | | | V | max (VCCC + 0.3) and < 4 V | 5 |
| Input current (any pins except supplies) | | -10 | | 10 | mA | | 5 |
| Ambient temperature under bias | | -40 | | 125 | °C | | 5 |
| Junction temperature | TJ | | | 150 | °C | | 5 |
| Lead temperature (soldering, 5 s) | | | | 260 | °C | soldering, 5 s | 5 |
| Package temperature (IR reflow, peak) | | | | 250 | °C | IR reflow, peak | 5 |
| Storage temperature | Tstg | -55 | | 150 | °C | | 5 |
| Supply voltage | | 3 | 3.3 | 3.6 | V | | 5 |
| Supply current ADC, DAC operation | | | 54 | 70 | mA | ADC, DAC operation | 5 |
| USB suspend state supply current | | | | 250 | µA | USB suspend state | 5 |
| Ambient temperature | | 0 | 25 | 85 | °C | | 5 |
| Junction-to-ambient thermal resistance | RθJA | | 64.5 | | °C/W | | 5 |
| Junction-to-case (top) thermal resistance | RθJC(top) | | 24.5 | | °C/W | | 5 |
| Junction-to-board thermal resistance | RθJB | | 25.4 | | °C/W | | 5 |
| Junction-to-top characterization parameter | ψJT | | 2 | | °C/W | | 5 |
| Junction-to-board characterization parameter | ψJB | | 25 | | °C/W | | 5 |
| High-level input voltage D+, D- | VIH | 2 | | | V | D+, D-; max VDD | 6 |
| High-level input voltage SEL0, SEL1 | VIH | 2 | | 5.25 | V | SEL0, SEL1 | 6 |
| High-level input voltage DIN | VIH | | | 5.25 | V | DIN | 6 |
| Low-level input voltage D+, D- | VIL | | | 0.8 | V | D+, D- | 6 |
| Low-level input voltage SEL0, SEL1 | VIL | | | 0.8 | V | SEL0, SEL1 | 6 |
| High-level input current D+, D-, XTI, SEL0, SEL1, HID0, HID1, HID2 | IIH | -10 | | 10 | µA | VIN = 3.3 V | 6 |
| High-level input current HID0, HID1, HID2 | IIH | | 50 | 80 | µA | VIN = 3.3 V | 6 |
| High-level input current DIN | IIH | | 65 | 100 | µA | VIN = 3.3 V | 6 |
| Low-level input current D+, D-, XTI, SEL0, SEL1, HID0, HID1, HID2, DIN | IIL | -10 | | 10 | µA | VIN = 0 V | 6 |
| High-level output voltage D+, D-, DOUT | VOH | 2.8 | | | V | IOH = -4 mA | 6 |
| High-level output voltage SSPND | VOH | 2.8 | | | V | IOH = -2 mA | 6 |
| Low-level output voltage D+, D- | VOL | | | 0.3 | V | | 6 |
| Low-level output voltage DOUT | VOL | | | 0.5 | V | IOL = 4 mA | 6 |
| Low-level output voltage SSPND | VOL | | | 0.5 | V | IOL = 2 mA | 6 |
| Input clock frequency XTI | | 11.994 | 12 | 12.006 | MHz | | 6 |
| ADC gain mismatch, channel-to-channel | | -5 | | 5 | % of FSR | | 6 |
| ADC gain error | | -10 | | 10 | % of FSR | | 6 |
| ADC THD+N | THD+N | | 0.01 | 0.02 | % | VIN = -1 dB | 6 |
| ADC dynamic range | | 81 | 89 | | dB | A-weighted | 7 |
| ADC SNR | SNR | 81 | 89 | | dB | A-weighted | 7 |
| ADC channel separation | | 80 | 85 | | dB | | 7 |
| ADC passband ripple | | -0.05 | | 0.05 | dB | | 7 |
| DAC gain mismatch, channel-to-channel | | -5 | | 5 | % of FSR | | 7 |
| DAC gain error | | -10 | | 10 | % of FSR | | 7 |
| DAC bipolar zero error | | -2 | | 2 | % of FSR | | 7 |
| DAC THD+N | THD+N | | 0.005 | 0.016 | % | VOUT = 0 dB | 7 |
| DAC dynamic range | | 87 | 93 | | dB | EIAJ, A-weighted | 7 |
| DAC SNR | SNR | 90 | 96 | | dB | EIAJ, A-weighted | 7 |
| DAC channel separation | | 86 | 92 | | dB | | 7 |
| DAC passband ripple | | -0.1 | | 0.1 | dB | | 7 |
| Supply voltage range VDD, VCCC, VCCP1, VCCP2, VCCX | | 3 | 3.3 | 3.6 | V | VDD, VCCC, VCCP1, VCCP2, VCCX | 8 |
| Supply current ADC, DAC operation | | | 54 | 70 | mA | ADC, DAC operation | 8 |
| Supply current suspend mode | | | | 250 | µA | Suspend mode | 8 |
| Power dissipation ADC, DAC operation | PD | | 178 | 252 | mW | ADC, DAC operation | 8 |
| Operating temperature range | | -25 | | 85 | °C | | 8 |
## CAD (KiCad official)
- Symbol: `PCM2903CDB`
- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`
- 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files: `pcm2903cdb-etched.step` / `pcm2903cdb-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `pcm2903cdb.step` / `pcm2903cdb.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/pcm2903c.pdf) (36 pp, sha256 `f4aae6d56c023551`, retrieved 2026-11-05, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/pcm2903cdb-datasheet.pdf)