Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PCM2903CDB

Texas Instruments · Audio Interface ICs · SSOP-28-208mil

PCM2903CDB from Texas Instruments, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 D+ bidirectional USB differential input/output plus at LV-TTL level.
2 D- bidirectional USB differential input/output minus at LV-TTL level.
3 VBUS power_in Must be connected to VDD.
4 DGNDU power_in Digital ground for the USB transceiver.
5 HID0 input HID key state input (mute), active-high, 3.3-V CMOS-level input with internal pulldown.
6 HID1 input HID key state input (volume up), active-high, 3.3-V CMOS-level input with internal pulldown.
7 HID2 input HID key state input (volume down), active-high, 3.3-V CMOS-level input with internal pulldown.
8 SEL0 input Must be set to high; TTL Schmitt trigger input, 5-V tolerant.
9 SEL1 input Connected to the USB port of VBUS; TTL Schmitt trigger input, 5-V tolerant.
10 VCCC power_in Analog power supply for the codec; connect a decoupling capacitor to GND.
11 AGNDC power_in Analog ground for the codec.
12 VINL input ADC analog input for the L-channel.
13 VINR input ADC analog input for the R-channel.
14 VCOM passive Common for ADC/DAC at VCCC/2; connect a decoupling capacitor to GND.
15 VOUTR output DAC analog output for the R-channel.
16 VOUTL output DAC analog output for the L-channel.
17 VCCP1 power_in Analog power supply for the PLL; connect a decoupling capacitor to GND.
18 AGNDP power_in Analog ground for the PLL.
19 VCCP2 power_in Analog power supply for the PLL; connect a decoupling capacitor to GND.
20 XTO output Crystal oscillator output.
21 XTI input Crystal oscillator input, 3.3-V CMOS-level input.
22 AGNDX power_in Analog ground for the oscillator.
23 VCCX power_in Analog power supply for the oscillator; connect a decoupling capacitor to GND.
24 DIN input S/PDIF input, 3.3-V CMOS-level input with internal pulldown, 5-V tolerant.
25 DOUT output S/PDIF output.
26 DGND power_in Digital ground.
27 VDD power_in Digital power supply; connect a decoupling capacitor to GND.
28 SSPND output Suspend flag, active-low (Low: suspend, High: operational).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SSOP-28-208mil
Category Interface
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCCC, VCCP1, VCCP2, VCCX, VDD -0.3 4 V 5
Supply voltage differences VCCC, VCCP1, VCCP2, VCCX, VDD -0.1 0.1 V 5
Ground voltage differences AGNDC, AGNDP, AGNDX, DGND, DGNDU -0.1 0.1 V 5
Digital input voltage SEL0, SEL1, DIN -0.3 6.5 V 5
Digital input voltage D+, D-, HID0, HID1, HID2, XTI, XTO, DOUT, SSPND -0.3 V max (VDD + 0.3) and < 4 V 5
Analog input voltage VINL, VINR, VCOM, VOUTR, VOUTL -0.3 V max (VCCC + 0.3) and < 4 V 5
Input current (any pins except supplies) -10 10 mA 5
Ambient temperature under bias -40 125 °C 5
Junction temperature TJ 150 °C 5
Lead temperature (soldering, 5 s) 260 °C soldering, 5 s 5
Package temperature (IR reflow, peak) 250 °C IR reflow, peak 5
Storage temperature Tstg -55 150 °C 5
Supply voltage 3 3.3 3.6 V 5
Supply current ADC, DAC operation 54 70 mA ADC, DAC operation 5
USB suspend state supply current 250 µA USB suspend state 5
Ambient temperature 0 25 85 °C 5
Junction-to-ambient thermal resistance RθJA 64.5 °C/W 5
Junction-to-case (top) thermal resistance RθJC(top) 24.5 °C/W 5
Junction-to-board thermal resistance RθJB 25.4 °C/W 5
Junction-to-top characterization parameter ψJT 2 °C/W 5
Junction-to-board characterization parameter ψJB 25 °C/W 5
High-level input voltage D+, D- VIH 2 V D+, D-; max VDD 6
High-level input voltage SEL0, SEL1 VIH 2 5.25 V SEL0, SEL1 6
High-level input voltage DIN VIH 5.25 V DIN 6
Low-level input voltage D+, D- VIL 0.8 V D+, D- 6
Low-level input voltage SEL0, SEL1 VIL 0.8 V SEL0, SEL1 6
High-level input current D+, D-, XTI, SEL0, SEL1, HID0, HID1, HID2 IIH -10 10 µA VIN = 3.3 V 6
High-level input current HID0, HID1, HID2 IIH 50 80 µA VIN = 3.3 V 6
High-level input current DIN IIH 65 100 µA VIN = 3.3 V 6
Low-level input current D+, D-, XTI, SEL0, SEL1, HID0, HID1, HID2, DIN IIL -10 10 µA VIN = 0 V 6
High-level output voltage D+, D-, DOUT VOH 2.8 V IOH = -4 mA 6
High-level output voltage SSPND VOH 2.8 V IOH = -2 mA 6
Low-level output voltage D+, D- VOL 0.3 V 6
Low-level output voltage DOUT VOL 0.5 V IOL = 4 mA 6
Low-level output voltage SSPND VOL 0.5 V IOL = 2 mA 6
Input clock frequency XTI 11.994 12 12.006 MHz 6
ADC gain mismatch, channel-to-channel -5 5 % of FSR 6
ADC gain error -10 10 % of FSR 6
ADC THD+N THD+N 0.01 0.02 % VIN = -1 dB 6
ADC dynamic range 81 89 dB A-weighted 7
ADC SNR SNR 81 89 dB A-weighted 7
ADC channel separation 80 85 dB 7
ADC passband ripple -0.05 0.05 dB 7
DAC gain mismatch, channel-to-channel -5 5 % of FSR 7
DAC gain error -10 10 % of FSR 7
DAC bipolar zero error -2 2 % of FSR 7
DAC THD+N THD+N 0.005 0.016 % VOUT = 0 dB 7
DAC dynamic range 87 93 dB EIAJ, A-weighted 7
DAC SNR SNR 90 96 dB EIAJ, A-weighted 7
DAC channel separation 86 92 dB 7
DAC passband ripple -0.1 0.1 dB 7
Supply voltage range VDD, VCCC, VCCP1, VCCP2, VCCX 3 3.3 3.6 V VDD, VCCC, VCCP1, VCCP2, VCCX 8
Supply current ADC, DAC operation 54 70 mA ADC, DAC operation 8
Supply current suspend mode 250 µA Suspend mode 8
Power dissipation ADC, DAC operation PD 178 252 mW ADC, DAC operation 8
Operating temperature range -25 85 °C 8

CAD (KiCad official)

  • Symbol: PCM2903CDB
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: pcm2903cdb-etched.step / pcm2903cdb-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pcm2903cdb.step / pcm2903cdb.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (36 pp, sha256 f4aae6d56c023551, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF