main
Ray Publish 0.1.0 66c7ad5
{
  "slug": "pca9554bbshp",
  "version": "0.1.0",
  "type": "component",
  "description": "NXP Semicon I/O Expanders, HVQFN-16(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "communication interface chip",
    "pca9554bbshp",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pca9554bbshp.kicad_sym",
    "pca9554bbshp.kicad_mod",
    "pca9554bbshp.glb",
    "pca9554bbshp.step",
    "pca9554bbshp.lbr",
    "docs/hero.png",
    "docs/pca9554bbshp-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "pca9554bbshp-hero.glb",
    "pca9554bbshp-hero.overlay.json",
    "pca9554bbshp-etched.glb"
  ],
  "component": {
    "mpn": "PCA9554BBSHP",
    "manufacturer": "NXP Semicon",
    "package": "HVQFN-16(3x3)",
    "pin_count": 17,
    "category": "Communication Interface Chip",
    "subcategory": "I/O Expanders",
    "datasheet": "https://www.nxp.com/docs/en/data-sheet/PCA9554B_PCA9554C.pdf",
    "parts": {
      "symbol": "pca9554bbshp.kicad_sym",
      "footprint": "pca9554bbshp.kicad_mod",
      "model_3d": "pca9554bbshp-hero.glb",
      "model_3d_plain": "pca9554bbshp-etched.glb",
      "model_3d_step": "pca9554bbshp-etched.step",
      "model_3d_step_plain": "pca9554bbshp.step",
      "lbr": "pca9554bbshp.lbr"
    },
    "distributor_links": {
      "lcsc": "C3188097",
      "digikey": "568-PCA9554BBSHPTR-ND",
      "mouser": "771-PCA9554BBSHP"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T17:12:45Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "568-PCA9554BBSHPTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "771-PCA9554BBSHP",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "A2",
        "type": "input",
        "description": "Hardware address input 2, held HIGH or LOW to select one of the eight possible slave addresses."
      },
      {
        "number": "2",
        "name": "P0",
        "type": "bidirectional",
        "description": "Port P input/output 0; all I/Os are configured as inputs at power-on and have weak pull-up resistors."
      },
      {
        "number": "3",
        "name": "P1",
        "type": "bidirectional",
        "description": "Port P input/output 1; all I/Os are configured as inputs at power-on and have weak pull-up resistors."
      },
      {
        "number": "4",
        "name": "P2",
        "type": "bidirectional",
        "description": "Port P input/output 2; all I/Os are configured as inputs at power-on and have weak pull-up resistors."
      },
      {
        "number": "5",
        "name": "P3",
        "type": "bidirectional",
        "description": "Port P input/output 3; all I/Os are configured as inputs at power-on and have weak pull-up resistors."
      },
      {
        "number": "6",
        "name": "VSS",
        "type": "power_in",
        "description": "Supply ground; must be connected to supply ground for proper device operation and is also connected to the exposed center pad."
      },
      {
        "number": "7",
        "name": "P4",
        "type": "bidirectional",
        "description": "Port P input/output 4; all I/Os are configured as inputs at power-on and have weak pull-up resistors."
      },
      {
        "number": "8",
        "name": "P5",
        "type": "bidirectional",
        "description": "Port P input/output 5; all I/Os are configured as inputs at power-on and have weak pull-up resistors."
      },
      {
        "number": "9",
        "name": "P6",
        "type": "bidirectional",
        "description": "Port P input/output 6; all I/Os are configured as inputs at power-on and have weak pull-up resistors."
      },
      {
        "number": "10",
        "name": "P7",
        "type": "bidirectional",
        "description": "Port P input/output 7; all I/Os are configured as inputs at power-on and have weak pull-up resistors."
      },
      {
        "number": "11",
        "name": "INT",
        "type": "output",
        "description": "Open-drain interrupt output, activated when any input state differs from its corresponding Input Port register state."
      },
      {
        "number": "12",
        "name": "SCL",
        "type": "input",
        "description": "I2C-bus serial clock line."
      },
      {
        "number": "13",
        "name": "SDA",
        "type": "bidirectional",
        "description": "I2C-bus serial data line."
      },
      {
        "number": "14",
        "name": "VDD",
        "type": "power_in",
        "description": "Supply voltage; the device operates over a wide VDD range of 1.65 V to 5.5 V."
      },
      {
        "number": "15",
        "name": "A0",
        "type": "input",
        "description": "Hardware address input 0, held HIGH or LOW to select one of the eight possible slave addresses."
      },
      {
        "number": "16",
        "name": "A1",
        "type": "input",
        "description": "Hardware address input 1, held HIGH or LOW to select one of the eight possible slave addresses."
      },
      {
        "number": "17",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The HVQFN16 package has an exposed center thermal pad that is connected to VSS, but the datasheet te; Pin numbers and pin-to-pad mapping were taken from the HVQFN16 column of Table 3 (page 4). The VSS e",
          "exposed pad 17 added from the footprint"
        ],
        "pages_sent": 6,
        "cost_usd": 0.0483,
        "at": "2026-10-28T17:12:15"
      },
      "datasheet": {
        "url": "https://www.nxp.com/docs/en/data-sheet/PCA9554B_PCA9554C.pdf",
        "pages": 36,
        "sha256": "b422826330a23422",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pca9554bbshp.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b32e528bf0799efacfbfd0e6175a168fff91b5905ee4d3720cfee9527a156853",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pca9554bbshp-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          3.0,
          3.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "68f48af8cbc72ff004631d0dbde5d1640ef502ed2911c40925560a52c2e43f61",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}