3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPCA9554BBSHP
NXP Semicon · I/O Expanders · HVQFN-16(3x3)
PCA9554BBSHP from NXP Semicon, in a HVQFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A2 | input | Hardware address input 2, held HIGH or LOW to select one of the eight possible slave addresses. |
| 2 | P0 | bidirectional | Port P input/output 0; all I/Os are configured as inputs at power-on and have weak pull-up resistors. |
| 3 | P1 | bidirectional | Port P input/output 1; all I/Os are configured as inputs at power-on and have weak pull-up resistors. |
| 4 | P2 | bidirectional | Port P input/output 2; all I/Os are configured as inputs at power-on and have weak pull-up resistors. |
| 5 | P3 | bidirectional | Port P input/output 3; all I/Os are configured as inputs at power-on and have weak pull-up resistors. |
| 6 | VSS | power_in | Supply ground; must be connected to supply ground for proper device operation and is also connected to the exposed center pad. |
| 7 | P4 | bidirectional | Port P input/output 4; all I/Os are configured as inputs at power-on and have weak pull-up resistors. |
| 8 | P5 | bidirectional | Port P input/output 5; all I/Os are configured as inputs at power-on and have weak pull-up resistors. |
| 9 | P6 | bidirectional | Port P input/output 6; all I/Os are configured as inputs at power-on and have weak pull-up resistors. |
| 10 | P7 | bidirectional | Port P input/output 7; all I/Os are configured as inputs at power-on and have weak pull-up resistors. |
| 11 | INT | output | Open-drain interrupt output, activated when any input state differs from its corresponding Input Port register state. |
| 12 | SCL | input | I2C-bus serial clock line. |
| 13 | SDA | bidirectional | I2C-bus serial data line. |
| 14 | VDD | power_in | Supply voltage; the device operates over a wide VDD range of 1.65 V to 5.5 V. |
| 15 | A0 | input | Hardware address input 0, held HIGH or LOW to select one of the eight possible slave addresses. |
| 16 | A1 | input | Hardware address input 1, held HIGH or LOW to select one of the eight possible slave addresses. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | HVQFN-16(3x3) |
| Category | Communication Interface Chip |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| supply voltage (absolute maximum) | VDD | -0.5 | 6.5 | V | 15 | ||
| input voltage (absolute maximum) | VI | -0.5 | 6.5 | V | 15 | ||
| output voltage (absolute maximum) | VO | -0.5 | 6.5 | V | 15 | ||
| input clamping current | IIK | 20 | mA | A0, A1, A2, SCL; VI < 0 V | 15 | ||
| output clamping current | IOK | 20 | mA | INT; VO < 0 V | 15 | ||
| input/output clamping current | IIOK | 20 | mA | P port; VO < 0 V or VO > VDD | 15 | ||
| LOW-level output current, continuous I/O port | IOL | 50 | mA | continuous; I/O port | 15 | ||
| LOW-level output current, continuous SDA, INT | IOL | 25 | mA | continuous; SDA, INT | 15 | ||
| HIGH-level output current, continuous P port | IOH | 25 | mA | continuous; P port | 15 | ||
| supply current | IDD | 160 | mA | 15 | |||
| ground supply current | ISS | 200 | mA | 15 | |||
| total power dissipation | Ptot | 200 | mW | 15 | |||
| storage temperature | Tstg | -65 | 150 | °C | 15 | ||
| maximum junction temperature | Tj(max) | 125 | °C | 15 | |||
| supply voltage (recommended operating) | VDD | 1.65 | 5.5 | V | 15 | ||
| HIGH-level input voltage | VIH | 5.5 | V | SCL, SDA; min printed as 0.7 × VDD | 15 | ||
| LOW-level input voltage | VIL | -0.5 | V | SCL, SDA; max printed as 0.3 × VDD | 15 | ||
| HIGH-level output current, P port | IOH | 10 | mA | P port | 15 | ||
| LOW-level output current, P port | IOL | 25 | mA | P port | 15 | ||
| ambient temperature operating in free air | Tamb | -40 | 85 | °C | operating in free air | 15 | |
| transient thermal impedance junction to ambient | Zth(j-a) | 53 | K/W | HVQFN16 package | 15 | ||
| input clamping voltage | VIK | 1.2 | V | II = 18 mA | 16 | ||
| power-on reset voltage | VPOR | 1.1 | 1.4 | V | VI = VDD or VSS; IO = 0 mA | 16 | |
| LOW-level output current SDA | IOL | 3 | mA | VOL = 0.4 V; VDD = 1.65 V to 5.5 V | 16 | ||
| LOW-level output current INT | IOL | 3 | 15 | mA | VOL = 0.4 V; VDD = 1.65 V to 5.5 V | 16 | |
| LOW-level output current P port | IOL | 8 | 10 | mA | VOL = 0.5 V; VDD = 1.65 V | 16 | |
| LOW-level output current P port | IOL | 10 | 13 | mA | VOL = 0.7 V; VDD = 1.65 V | 16 | |
| LOW-level output current P port | IOL | 8 | 14 | mA | VOL = 0.5 V; VDD = 3.0 V | 16 | |
| LOW-level output current P port | IOL | 10 | 19 | mA | VOL = 0.7 V; VDD = 3.0 V | 16 | |
| LOW-level output current P port | IOL | 8 | 17 | mA | VOL = 0.5 V; VDD = 4.5 V | 16 | |
| LOW-level output current P port | IOL | 10 | 24 | mA | VOL = 0.7 V; VDD = 4.5 V | 16 | |
| HIGH-level output voltage P port | VOH | 1.2 | V | IOH = 8 mA; VDD = 1.65 V | 16 | ||
| HIGH-level output voltage P port | VOH | 1.1 | V | IOH = 10 mA; VDD = 1.65 V | 16 | ||
| HIGH-level output voltage P port | VOH | 1.8 | V | IOH = 8 mA; VDD = 2.3 V | 16 | ||
| HIGH-level output voltage P port | VOH | 1.7 | V | IOH = 10 mA; VDD = 2.3 V | 16 | ||
| HIGH-level output voltage P port | VOH | 2.6 | V | IOH = 8 mA; VDD = 3.0 V | 16 | ||
| HIGH-level output voltage P port | VOH | 2.5 | V | IOH = 10 mA; VDD = 3.0 V | 16 | ||
| HIGH-level output voltage P port | VOH | 4.1 | V | IOH = 8 mA; VDD = 4.75 V | 16 | ||
| HIGH-level output voltage P port | VOH | 4 | V | IOH = 10 mA; VDD = 4.75 V | 16 | ||
| input current | II | 0.1 | µA | SCL, SDA; VI = VDD or VSS; VDD = 1.65 V to 5.5 V | 16 | ||
| HIGH-level input current P port | IIH | 1 | µA | P port; VI = VDD; VDD = 1.65 V to 5.5 V | 16 | ||
| LOW-level input current P port | IIL | 100 | µA | P port; VI = VSS; VDD = 1.65 V to 5.5 V | 16 | ||
| supply current, fSCL = 400 kHz | IDD | 10 | 25 | µA | IO = 0 mA; I/O = inputs; fSCL = 400 kHz; VDD = 3.6 V to 5.5 V | 17 | |
| supply current, fSCL = 400 kHz | IDD | 6.5 | 15 | µA | IO = 0 mA; I/O = inputs; fSCL = 400 kHz; VDD = 2.3 V to 3.6 V | 17 | |
| supply current, fSCL = 400 kHz | IDD | 4 | 9 | µA | IO = 0 mA; I/O = inputs; fSCL = 400 kHz; VDD = 1.65 V to 2.3 V | 17 | |
| standby supply current, fSCL = 0 kHz | IDD | 1.5 | 7 | µA | IO = 0 mA; I/O = inputs; fSCL = 0 kHz; VDD = 3.6 V to 5.5 V | 17 | |
| standby supply current, fSCL = 0 kHz | IDD | 1 | 3.2 | µA | IO = 0 mA; I/O = inputs; fSCL = 0 kHz; VDD = 2.3 V to 3.6 V | 17 | |
| standby supply current, fSCL = 0 kHz | IDD | 0.5 | 1.7 | µA | IO = 0 mA; I/O = inputs; fSCL = 0 kHz; VDD = 1.65 V to 2.3 V | 17 | |
| active mode supply current, continuous register read | IDD | 60 | 125 | µA | IO = 0 mA; I/O = inputs; fSCL = 400 kHz; continuous register read; VDD = 3.6 V to 5.5 V | 17 | |
| active mode supply current, continuous register read | IDD | 40 | 75 | µA | IO = 0 mA; I/O = inputs; fSCL = 400 kHz; continuous register read; VDD = 2.3 V to 3.6 V | 17 | |
| active mode supply current, continuous register read | IDD | 20 | 45 | µA | IO = 0 mA; I/O = inputs; fSCL = 400 kHz; continuous register read; VDD = 1.65 V to 2.3 V | 17 | |
| additional supply current with pull-ups | IDD | 0.55 | 0.75 | mA | P port, A0, A1, A2 with pull-ups; VI on P port = VSS; IO = 0 mA; I/O = inputs with pull-up; fSCL = 0 kHz; VDD = 1.65 V to 5.5 V | 17 | |
| additional quiescent supply current P port, A0, A1, A2 | IDD | 80 | µA | one input at VDD − 0.6 V, other inputs at VDD or VSS; VDD = 1.65 V to 5.5 V | 17 | ||
| input capacitance | Ci | 6 | 7 | pF | VI = VDD or VSS; VDD = 1.65 V to 5.5 V | 17 | |
| input/output capacitance | Cio | 7 | 8 | pF | VI/O = VDD or VSS; VDD = 1.65 V to 5.5 V | 17 | |
| internal pull-up resistance | Rpu(int) | 50 | 100 | 150 | kΩ | input/output | 17 |
CAD (KiCad official)
- Symbol:
PCA9554BBSHP - Footprint:
Package_DFN_QFN:HVQFN-16-1EP_3x3mm_P0.5mm_EP1.5x1.5mm - 3D model: HVQFN-16(3x3) (KiCad packages3D, STEP)
- 3D model files:
pca9554bbshp-etched.step/pca9554bbshp-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pca9554bbshp.step/pca9554bbshp.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (36 pp, sha256
b422826330a23422, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).