main
Ray pca9548arger: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) 9e798b3
{
  "slug": "pca9548arger",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Interface - Specialized, VQFN-24(4x4). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "pca9548arger",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "pca9548arger.kicad_sym",
    "pca9548arger.kicad_mod",
    "pca9548arger.glb",
    "pca9548arger.step",
    "pca9548arger.lbr",
    "docs/hero.png",
    "docs/pca9548arger-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "PCA9548ARGER",
    "manufacturer": "Texas Instruments",
    "package": "VQFN-24(4x4)",
    "pin_count": 25,
    "category": "Interface",
    "subcategory": "Interface - Specialized",
    "datasheet": "https://www.ti.com/cn/lit/gpn/pca9548a",
    "parts": {
      "symbol": "pca9548arger.kicad_sym",
      "footprint": "pca9548arger.kicad_mod",
      "model_3d": "pca9548arger-etched.glb",
      "model_3d_plain": "pca9548arger.glb",
      "model_3d_step": "pca9548arger-etched.step",
      "model_3d_step_plain": "pca9548arger.step",
      "lbr": "pca9548arger.lbr"
    },
    "distributor_links": {
      "lcsc": "C3217144",
      "digikey": "296-21776-2-ND",
      "mouser": "595-PCA9548ARGER"
    },
    "distributor_check": {
      "checked_at": "2026-09-27T02:06:58Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-21776-2-ND",
        "status": "found",
        "lifecycle": "Not For New Designs"
      },
      "mouser": {
        "pn": "595-PCA9548ARGER",
        "status": "found",
        "lifecycle": "Not Recommended for New Designs"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SD0",
        "type": "bidirectional",
        "description": "Serial data 0. Connect to VCC through a pull-up resistor."
      },
      {
        "number": "2",
        "name": "SC0",
        "type": "bidirectional",
        "description": "Serial clock 0. Connect to VCC through a pull-up resistor."
      },
      {
        "number": "3",
        "name": "SD1",
        "type": "bidirectional",
        "description": "Serial data 1. Connect to VCC through a pull-up resistor."
      },
      {
        "number": "4",
        "name": "SC1",
        "type": "bidirectional",
        "description": "Serial clock 1. Connect to VCC through a pull-up resistor."
      },
      {
        "number": "5",
        "name": "SD2",
        "type": "bidirectional",
        "description": "Serial data 2. Connect to VCC through a pull-up resistor."
      },
      {
        "number": "6",
        "name": "SC2",
        "type": "bidirectional",
        "description": "Serial clock 2. Connect to VCC through a pull-up resistor."
      },
      {
        "number": "7",
        "name": "SD3",
        "type": "bidirectional",
        "description": "Serial data 3. Connect to VCC through a pull-up resistor."
      },
      {
        "number": "8",
        "name": "SC3",
        "type": "bidirectional",
        "description": "Serial clock 3. Connect to VCC through a pull-up resistor."
      },
      {
        "number": "9",
        "name": "GND",
        "type": "power_in",
        "description": "Ground."
      },
      {
        "number": "10",
        "name": "SD4",
        "type": "bidirectional",
        "description": "Serial data 4. Connect to VCC through a pull-up resistor."
      },
      {
        "number": "11",
        "name": "SC4",
        "type": "bidirectional",
        "description": "Serial clock 4. Connect to VCC through a pull-up resistor."
      },
      {
        "number": "12",
        "name": "SD5",
        "type": "bidirectional",
        "description": "Serial data 5. Connect to VCC through a pull-up resistor."
      },
      {
        "number": "13",
        "name": "SC5",
        "type": "bidirectional",
        "description": "Serial clock 5. Connect to VCC through a pull-up resistor."
      },
      {
        "number": "14",
        "name": "SD6",
        "type": "bidirectional",
        "description": "Serial data 6. Connect to VCC through a pull-up resistor."
      },
      {
        "number": "15",
        "name": "SC6",
        "type": "bidirectional",
        "description": "Serial clock 6. Connect to VCC through a pull-up resistor."
      },
      {
        "number": "16",
        "name": "SD7",
        "type": "bidirectional",
        "description": "Serial data 7. Connect to VCC through a pull-up resistor."
      },
      {
        "number": "17",
        "name": "SC7",
        "type": "bidirectional",
        "description": "Serial clock 7. Connect to VCC through a pull-up resistor."
      },
      {
        "number": "18",
        "name": "A2",
        "type": "input",
        "description": "Address input 2. Connect directly to VCC or ground."
      },
      {
        "number": "19",
        "name": "SCL",
        "type": "bidirectional",
        "description": "Serial clock bus. Connect to VCC through a pull-up resistor."
      },
      {
        "number": "20",
        "name": "SDA",
        "type": "bidirectional",
        "description": "Serial data bus. Connect to VCC through a pull-up resistor."
      },
      {
        "number": "21",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage."
      },
      {
        "number": "22",
        "name": "A0",
        "type": "input",
        "description": "Address input 0. Connect directly to VCC or ground."
      },
      {
        "number": "23",
        "name": "A1",
        "type": "input",
        "description": "Address input 1. Connect directly to VCC or ground."
      },
      {
        "number": "24",
        "name": "RESET",
        "type": "input",
        "description": "Active-low reset input. Connect to VCC through a pull-up resistor, if not used."
      },
      {
        "number": "25",
        "name": "PAD",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "exposed pad 25 added from the footprint"
        ],
        "pages_sent": 46,
        "cost_usd": 0.3098,
        "at": "2026-09-27T02:06:39"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/pca9548a",
        "pages": 46,
        "sha256": "0ad97d70ad4250c5",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 25,
        "described": 25,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "pca9548arger.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f7d256794c4147daf24dcae0554fae18510315e565ad1e239b475be7fef80d8b",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "pca9548arger-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.0,
          4.0,
          0.77
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3d4e97fd507adeb9a96d237295bd7bb4849c65c72b408a7f316ee68881808dcf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}